COVER 1297863 - Caterpillar

Illustration 1 g01370243
Front Wheel Group
Illustration 2 g01370248
Rear Wheel Group
Table 1
Specification for 295-2583 Service and Parking Brake Gp
Specification for 295-2584 Service and Parking Brake Gp    
Item     Qty     Part     Specification Description    
1     1     4I-0755 Nut     Torque for nut 50 10 N m (37 7 lb ft).    
2     3     284-8960 Washer     Thickness of one washer
0.5 mm (0.02 inch).    
3     1     284-8959 Washer     Thickness of one washer
2.0 mm (0.08 inch).    
-     -     -     Refer to the Testing and Adjusting, "Service Brakes - Test" for your machine for additional information on the installation of the washers and the compensator.    
4     -     -     Lubricate the seals, shafts, and bores lightly with the lubricant that is being sealed prior to assembly.    
5     4     284-9553 Spring     Length under test force is
40 mm (1.6 inch).    
Test force is
400 N (90 lb).
Free length after test is
52.1 mm (2.05 inch).
6     4     8T-1159 Bolt     Torque to
60 12 N m (45 9 lb ft).    
7     7     284-9557 Plate     Thickness of one plate
1.91 0.064 mm (0.0752 0.0025 inch).    
8     6     351-0925 Friction Discs     Thickness of one disc
3.6 0.08 mm (0.142 0.003 inch).
The minimum reusable thickness for one disc is
3.43 mm (0.135 inch).    
9     1     5H-3701 Purge Screw     Torque to
12 3 N m (105 27 lb in)..    
10     20     103-6169 Self-Locking Bolts    
270 40 N m (199. 30 lb ft).    
11     1     7D-8441 Shim     Thickness of one shim
0.13 mm (0.005 inch).    
12     4     7D-8439 Shim     Thickness of one shim
0.18 mm (0.007 inch).    
13     4     9D-7047 Shim     Thickness of one shim
0.51 mm (0.020 inch).    
-     -     -     Refer to the Disassembly and Assembly, "Service Brakes" for additional information regarding the installation of these shims.    
14     -     -     Clean the mounting surface. Prior to assembling the wheel group and the tandem, apply 1U-8846 Gasket Sealant to the mounting surface.    
15     -     -     The seals and all of the surfaces that are contacting the seals must be clean and dry at assembly. Apply a thin film of oil to the metal seal ring prior to assembly.