DISTRIBUTION AR 3797188 - Caterpillar

Table 1
Adjustment for Standard Injector (SL-1)    
Number of Turns Out     Volume of Lubricant    
0    
0.23 cc (0.014 in3)    
1    
0.36 cc (0.022 in3)    
2    
0.49 cc (0.030 in3)    
3    
0.62 cc (0.038 in3)    
4    
0.75 cc (0.046 in3)    
5    
0.88 cc (0.054 in3)    
6    
1.02 cc (0.062 in3)    
7    
1.15 cc (0.070 in3)    
8    
1.28 cc (0.078 in3)    
Table 2
Adjustment for Jumbo Injector (SL-11)    
Number of Turns Out     Volume of Lubricant    
0    
8.19 cc (0.5 in3)    
1    
14.75 cc (0.9 in3)    
2    
21.30 cc (1.3 in3)    
3    
27.86 cc (1.7 in3)    
4    
34.41 cc (2.1 in3)    
5    
40.97 cc (2.5 in3)    
6    
47.52 cc (2.9 in3)    
7    
54.08 cc (3.3 in3)    
8    
60.63 cc (3.7 in3)    
9    
67.19 cc (4.1 in3)    
10    
73.74 cc (4.5 in3)    
11    
80.30 cc (4.9 in3)    Note: The number within each injector in the following views is the required number of counterclockwise turns of the adjusting nut.
Illustration 1 g00989877
(1) Lubrication injector bank on the left side of the chassis (2) Lubrication injector bank on the right side of the chassis
Illustration 2 g00989879
Front view of the lubrication injector bank on the right side of the chassis (3) Lubrication line on the rod end of the boom cylinder (4) Lubrication line on the swing gear (5) Lubrication line on the boom foot pin (6) Lubrication line on the swing motor pinion
Illustration 3 g00989881
Front view of the lubrication injector bank on the left side of the chassis (3) Lubrication line on the rod end of the boom cylinder (4) Lubrication line on the swing gear (5) Lubrication line on the boom foot pin (6) Lubrication line on the swing motor pinion
Illustration 4 g00989883
Lubrication injector banks on the front shovel boom (7) Lubrication line on the boom and stick pivot pin (8) Lubrication line on the rod end of the bucket cylinder (9) Lubrication line on the head end of the boom cylinder (10) Lubrication line on the head end