1399734 ENGINE AR-COMPLETE Caterpillar parts
C-10
Rating:
Alternative (cross code) number:
CA1399734
139-9734
1399734
CA1399734
139-9734
1399734
TRUCK ENGINE,
Compatible equipment models: 1399734:
For full view, you need register
Information:
Disassembly Procedure
Table 1
Required Tools
Tools Part Numbers Description Qty
A 1P-1857 Retaining Ring Pliers 1
B 1P-1859 Retaining Ring Pliers 1
C 9S-9152 Bearing Puller Gp 1 Start By:
Remove the vibratory group.Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the component should be thoroughly cleaned to prevent dirt from entering the internal mechanism.Main
Illustration 1 g03680148
Remove plugs (2) and (4) to drain the hydraulic fluid from the vibratory group. Drain the hydraulic fluid into a suitable container.
Remove bolts (6) and cover (7).
Use Tooling (A) to remove retaining ring (8) from housing (1).
Remove shaft (3) from housing (1).
Use Tooling (B) to remove retaining rings (9).
Use a suitable press to remove bearings (5) and (10) from each end of shaft (3).Extender
Illustration 2 g03680146
Remove plugs (1) and (4) to drain the hydraulic fluid from the vibratory group. Drain the hydraulic fluid from the vibratory group into a suitable container.
Remove bolts (11) and cover (10).
Turn over cover (10) and remove shaft seal (9).
Use Tooling (A) to remove retaining ring (7) from housing (2).
Remove shaft (5) from housing (2).
Use Tooling (B) to remove retaining rings (8).
Use Tooling (C) and a suitable press to remove bearings (3) and (6) from each end of shaft (5).
Table 1
Required Tools
Tools Part Numbers Description Qty
A 1P-1857 Retaining Ring Pliers 1
B 1P-1859 Retaining Ring Pliers 1
C 9S-9152 Bearing Puller Gp 1 Start By:
Remove the vibratory group.Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the component should be thoroughly cleaned to prevent dirt from entering the internal mechanism.Main
Illustration 1 g03680148
Remove plugs (2) and (4) to drain the hydraulic fluid from the vibratory group. Drain the hydraulic fluid into a suitable container.
Remove bolts (6) and cover (7).
Use Tooling (A) to remove retaining ring (8) from housing (1).
Remove shaft (3) from housing (1).
Use Tooling (B) to remove retaining rings (9).
Use a suitable press to remove bearings (5) and (10) from each end of shaft (3).Extender
Illustration 2 g03680146
Remove plugs (1) and (4) to drain the hydraulic fluid from the vibratory group. Drain the hydraulic fluid from the vibratory group into a suitable container.
Remove bolts (11) and cover (10).
Turn over cover (10) and remove shaft seal (9).
Use Tooling (A) to remove retaining ring (7) from housing (2).
Remove shaft (5) from housing (2).
Use Tooling (B) to remove retaining rings (8).
Use Tooling (C) and a suitable press to remove bearings (3) and (6) from each end of shaft (5).