1523162 ENGINE AR-COMPLETE Caterpillar parts
C-12
Rating:
Alternative (cross code) number:
CA1523162
152-3162
1523162
CA1523162
152-3162
1523162
TRUCK ENGINE,
Related part:
1523162
SHORT BLOCK
0R9680
R
Compatible equipment models: 1523162:
For full view, you need register
Information:
Operator Controls
Illustration 1 g03799509
Left Side of Instrument Panel
(1) Left hopper control lever
(2) Right hopper control lever
(3) Screed lift control lever
(4) Screed lower safety lock The hopper system and the screed lift system are controlled by control levers located on the left side of the instrument panel.The left hopper and the right hopper are controlled independently. The left hopper control lever (1) is used to operate the left hopper control valve. The right hopper control lever (2) is used to operate the right hopper control valve.The top position of the hopper control levers is the RAISE position. The bottom position of the hopper control levers is the LOWER position. The middle position of the hopper control levers is the HOLD position.The screed lift control lever (3) is used to operate the screed lift control valve.The top position of the screed lift control lever (3) is the RAISE position. The bottom position of the screed lift control lever is the LOWER position. The middle position of the screed lift control lever is the HOLD position.The screed lift control lever (3) can be locked in the HOLD position by the screed lower safety lock (4).
Illustration 2 g03799511
Left Screed Operator Station
(5) Left screed width switch
(6) Left tow point switch The left screed operator station is located on the left side of the operator station. This operator station contains the left screed width switch (5) and the left tow point switch (6).The left screed width switch (5) is a momentary-type toggle switch. This switch has three positions. The left position is the EXTEND position. The center position is the HOLD position. The right position is the RETRACT position.The left screed width switch (5) controls the left screed extend solenoid and the left screed retract solenoid.The left tow point switch (6) is a momentary-type toggle switch. This switch has three positions. The top position is the RAISE position. The center position is the HOLD position. The bottom position is the LOWER position.The left tow point switch (6) controls the left tow point raise solenoid and the left tow point lower solenoid.
Illustration 3 g03799513
Right Screed Operator Station
(7) Right tow point switch
(8) Right screed width switch The right screed operator station is located on the right side of the operator station. This operator station contains the right screed width switch (8) and the right tow point switch (7).The right screed width switch (8) is a momentary-type toggle switch. This switch has three positions. The right position is the EXTEND position. The center position is the HOLD position. The left position is the RETRACT position.The right screed width switch (8) controls the right screed extend solenoid and the right screed retract solenoid.The right tow point switch (7) is a momentary-type toggle switch. This switch has three positions. The top position is the RAISE position. The center position is the HOLD position. The bottom position is the LOWER position.The right tow point switch (7) controls the right tow point raise solenoid and the right tow point lower solenoid.
Illustration 1 g03799509
Left Side of Instrument Panel
(1) Left hopper control lever
(2) Right hopper control lever
(3) Screed lift control lever
(4) Screed lower safety lock The hopper system and the screed lift system are controlled by control levers located on the left side of the instrument panel.The left hopper and the right hopper are controlled independently. The left hopper control lever (1) is used to operate the left hopper control valve. The right hopper control lever (2) is used to operate the right hopper control valve.The top position of the hopper control levers is the RAISE position. The bottom position of the hopper control levers is the LOWER position. The middle position of the hopper control levers is the HOLD position.The screed lift control lever (3) is used to operate the screed lift control valve.The top position of the screed lift control lever (3) is the RAISE position. The bottom position of the screed lift control lever is the LOWER position. The middle position of the screed lift control lever is the HOLD position.The screed lift control lever (3) can be locked in the HOLD position by the screed lower safety lock (4).
Illustration 2 g03799511
Left Screed Operator Station
(5) Left screed width switch
(6) Left tow point switch The left screed operator station is located on the left side of the operator station. This operator station contains the left screed width switch (5) and the left tow point switch (6).The left screed width switch (5) is a momentary-type toggle switch. This switch has three positions. The left position is the EXTEND position. The center position is the HOLD position. The right position is the RETRACT position.The left screed width switch (5) controls the left screed extend solenoid and the left screed retract solenoid.The left tow point switch (6) is a momentary-type toggle switch. This switch has three positions. The top position is the RAISE position. The center position is the HOLD position. The bottom position is the LOWER position.The left tow point switch (6) controls the left tow point raise solenoid and the left tow point lower solenoid.
Illustration 3 g03799513
Right Screed Operator Station
(7) Right tow point switch
(8) Right screed width switch The right screed operator station is located on the right side of the operator station. This operator station contains the right screed width switch (8) and the right tow point switch (7).The right screed width switch (8) is a momentary-type toggle switch. This switch has three positions. The right position is the EXTEND position. The center position is the HOLD position. The left position is the RETRACT position.The right screed width switch (8) controls the right screed extend solenoid and the right screed retract solenoid.The right tow point switch (7) is a momentary-type toggle switch. This switch has three positions. The top position is the RAISE position. The center position is the HOLD position. The bottom position is the LOWER position.The right tow point switch (7) controls the right tow point raise solenoid and the right tow point lower solenoid.
