ENGINE AR-COMPLETE 1781543 - Caterpillar

a maximum service life of the machine, complete a thorough walk-around inspection before you mount the machine and before you start the engine.Inspect the area around the machine and under the machine. Look for loose bolts, trash buildup, oil, coolant leakage, broken parts, or worn parts.Note: Watch closely for leaks. If you observe a leak, find the source of the leak and correct the leak. If you suspect a leak or you observe a leak, check the fluid levels more frequently.Inspect the condition of the equipment and of the hydraulic components.Check the condition of the tires. Adjust the inflation pressure, if necessary.Check all of the oil levels, all of the coolant levels, and all of the fuel levels.Remove any trash buildup and debris. Make all necessary repairs before you operate the machine.Make sure that all covers and guards are securely attached.Adjust the mirrors for the correct rear view of the machine.Make sure that the engine air filter service indicator is not in the red zone.Grease all of the fittings that need to be serviced on a daily basis.Daily, perform the procedures that are applicable to your machine:
Backup Alarm - Test
Cooling System Level - Check
Drum Scrapers - Inspect/Adjust/Replace
Engine Air Filter Service Indicator - Inspect
Engine Oil Level - Check
Hydraulic System Oil Level - Check
Indicators and Gauges - Test
Neutral Start Switch - Test
Seat Belt - Inspect
Service Lock Valves - Check
Tire Scraper - Inspect/Adjust/Replace
Water Spray System Filter - Clean