1915394 ENGINE AR-CORE Caterpillar parts
C-12
Rating:
Alternative (cross code) number:
CA1915394
191-5394
1915394
CA1915394
191-5394
1915394
INDUSTRIAL ENGINE,
Related part:
1915394
SHORT BLOCK
0R9680
R
1915394
LONG BLOCK M
10R6325
R
Compatible equipment models: 1915394:
Information:
This diagnostic code is recorded when the power train electronic control module (ECM) detects a transmission solenoid valve 1 that needs calibration. This diagnostic code will disappear once the calibration procedure has been performed successfully. The diagnostic code will no longer be present.System Response:The machine response is listed below:
The operation of the solenoid is slow or erratic. Test Step 1. PERFORM CALIBRATION.
Perform the calibration procedure for the transmission solenoid valve 1. See the Testing and Adjusting, RENR7517, "Calibration" procedure in the service manual for your machine. Expected Result:The calibration procedure was performed successfully.Results:
OK - The calibration procedure was performed successfully. Resume normal machine operation.STOP
NOT OK - The calibration procedure was not performed successfully. Repair: Perform the calibration procedure again. See the Testing and Adjusting, RENR7517, "Calibration" procedure in the service manual for your machine.STOP
The operation of the solenoid is slow or erratic. Test Step 1. PERFORM CALIBRATION.
Perform the calibration procedure for the transmission solenoid valve 1. See the Testing and Adjusting, RENR7517, "Calibration" procedure in the service manual for your machine. Expected Result:The calibration procedure was performed successfully.Results:
OK - The calibration procedure was performed successfully. Resume normal machine operation.STOP
NOT OK - The calibration procedure was not performed successfully. Repair: Perform the calibration procedure again. See the Testing and Adjusting, RENR7517, "Calibration" procedure in the service manual for your machine.STOP