ENGINE AR-COMPLETE 2104123 - Caterpillar

At operating temperature, the engine coolant is hot and under pressure.Steam can cause personal injury.Check the coolant level only after the engine has been stopped and the fill cap is cool enough to touch with your bare hand.Remove the fill cap slowly to relieve pressure.Cooling system conditioner contains alkali. Avoid contact with the skin and eyes to prevent personal injury.
Illustration 1 g02047634
Slowly loosen the filler cap on the shunt tank in order to release any pressure in the system. Slowly remove the filler cap on the shunt tank.
Illustration 2 g01402853
The shunt tank is located inside the compartment to the left of the exhaust stack.
Maintain the coolant level between the indicated lines. If it is necessary to add coolant daily, check the cooling system for leaks. Repair the leaks as the leaks are found.
Inspect the gasket. Inspect the filler cap on the shunt tank. Clean the filler cap on the shunt tank with a clean cloth. Replace the cap if the gasket or the cap are damaged.
Install the filler cap on the shunt tank.