2325677 ENGINE AR-COMPLETE Caterpillar parts
C-12
Rating:
Alternative (cross code) number:
CA2325677
232-5677
2325677
CA2325677
232-5677
2325677
TRUCK ENGINE,
Compatible equipment models: 2325677:
For full view, you need register
Information:
Bucket focus
Position information shown on the Display relates to the bucket focus point. The following focus points are available through the Display on the bucket: the left bucket tip, the right bucket tip and the bucket center. The red square on the bucket indicates the horizontal guidance point (bucket focus), if applicable. The green line on the bucket indicates the vertical guidance point(s).Machine symbols
The AccuGrade System software uses a variety of symbols for display in the Plan and Profile Views. The symbol that appears on the screen depends on the machine type that the AccuGrade System is configured for.The bucket tip in a symbol corresponds exactly to the bucket tip of your machine.As you move the machine and the bucket, the symbol simulates the movements on the screen.
Illustration 1 g01780426
Machine icon viewsNote: If you drive the symbol off the edge of the display, by default, the display follows or "auto pans" to the symbol.Using the Display
You can adjust the magnification and central position of the Plan, Cross-section, and Profile Views to get a clearer view of your machine in relation to the current design.
Illustration 2 g01373490
AccuGrade CD700 Display (1) LCD Screen (2) Soft Key Labels (3) Soft Keys (4) Next Key (5) Escape Key (6) Slot for Data Card (7) Power Key (8) Menu Key (9) Arrow Keys (10) OK Key (11) Zoom out Key (12) Zoom in KeyZoom In
Press the "+" key (12) in order to zoom in the current view. When you zoom in, you see more detail on the screen. The machine symbol is drawn larger in order to remain in proportion to the other features displayed in the view. As you zoom in, less of the design and linework will be displayed. You can zoom in until the bucket fills the screen.Zoom Out
Press the "-" key (11) in order to zoom out the current view. When you zoom out, you see less detail on the screen. The machine symbol is drawn smaller to remain in proportion to the other features displayed in the view. As you zoom out, more of the design and linework will be displayed. You can zoom out so far that the machine symbol is barely visible on the screen. When you zoom out this far, the machine symbol is no longer drawn to scale. This makes sure you can always see the machine symbol in the current view.Zoom All
In Plan View, press and hold the "-" key (11) in order to resize the view so that the machine symbol and all linework are visible. The display includes the Site and Design Avoidance Zones, Site Map, the Background Plan, and the design boundary.In the Cross-section View, press and hold the "-" soft key in order to resize the view to a maximum of 100 meters to the left of the machine and 100 meters to the right of the machine bucket.Zoom Machine
In order to resize the current view around the machine symbol, press and hold the "-". This feature is only available in
Position information shown on the Display relates to the bucket focus point. The following focus points are available through the Display on the bucket: the left bucket tip, the right bucket tip and the bucket center. The red square on the bucket indicates the horizontal guidance point (bucket focus), if applicable. The green line on the bucket indicates the vertical guidance point(s).Machine symbols
The AccuGrade System software uses a variety of symbols for display in the Plan and Profile Views. The symbol that appears on the screen depends on the machine type that the AccuGrade System is configured for.The bucket tip in a symbol corresponds exactly to the bucket tip of your machine.As you move the machine and the bucket, the symbol simulates the movements on the screen.
Illustration 1 g01780426
Machine icon viewsNote: If you drive the symbol off the edge of the display, by default, the display follows or "auto pans" to the symbol.Using the Display
You can adjust the magnification and central position of the Plan, Cross-section, and Profile Views to get a clearer view of your machine in relation to the current design.
Illustration 2 g01373490
AccuGrade CD700 Display (1) LCD Screen (2) Soft Key Labels (3) Soft Keys (4) Next Key (5) Escape Key (6) Slot for Data Card (7) Power Key (8) Menu Key (9) Arrow Keys (10) OK Key (11) Zoom out Key (12) Zoom in KeyZoom In
Press the "+" key (12) in order to zoom in the current view. When you zoom in, you see more detail on the screen. The machine symbol is drawn larger in order to remain in proportion to the other features displayed in the view. As you zoom in, less of the design and linework will be displayed. You can zoom in until the bucket fills the screen.Zoom Out
Press the "-" key (11) in order to zoom out the current view. When you zoom out, you see less detail on the screen. The machine symbol is drawn smaller to remain in proportion to the other features displayed in the view. As you zoom out, more of the design and linework will be displayed. You can zoom out so far that the machine symbol is barely visible on the screen. When you zoom out this far, the machine symbol is no longer drawn to scale. This makes sure you can always see the machine symbol in the current view.Zoom All
In Plan View, press and hold the "-" key (11) in order to resize the view so that the machine symbol and all linework are visible. The display includes the Site and Design Avoidance Zones, Site Map, the Background Plan, and the design boundary.In the Cross-section View, press and hold the "-" soft key in order to resize the view to a maximum of 100 meters to the left of the machine and 100 meters to the right of the machine bucket.Zoom Machine
In order to resize the current view around the machine symbol, press and hold the "-". This feature is only available in
