FLAP 9V9229 - Caterpillar

9V9229 FLAP Caterpillar parts 980C, 980F, 980F II

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA9V9229
9V-9229
9V9229

Weight: 18 pounds 8 kg.

Information:

LENGTH 776 mm

NUMBER OF HOLES 0000004.0000

SLOT/HOLE DIAMETER 14.29 mm

THICKNESS 7.94 mm

WIDTH 914.4 mm

Buy FLAP 9V9229 Caterpillar genuine, new aftermarket tractor parts with delivery
WHEEL LOADER,

Compatible equipment models: 9V9229:

WHEEL LOADER 980C 980F 980F II Caterpillar

Number on catalog scheme: 9

For full view, you need register

Information:

Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Ensure that the fuel injection pump gear is clean and free from wear of damage. If necessary, replace the fuel pump gear. Ensure that the shaft for the fuel injection pump is clean and free from wear of damage.
Illustration 1 g02483636
Position a new O-ring seal (5) onto fuel injection pump (7).
Position adapter plate (4) onto fuel injection pump (7).
Install new bolts (9) and washer (8). Tighten the bolts to a torque of 22 N m (195 lb in).
Install key (6) to the shaft of fuel injection pump (7).
Position gear (3) onto the shaft of fuel injection pump (7).
Position a new washer (2) onto the shaft of the fuel injection pump. Install nut (1) and tighten the nut hand tight.
Use a suitable tool in order to prevent fuel injection pump gear (3) from rotating. Ensure that the gear is not damaged as nut (1) is tightened. Note: Do not use timing pin for the fuel injection in order to prevent the fuel injection pump gear from rotating.
Tighten nut (1) to a torque of 64 N m (47 lb ft). End By:
Install the fuel injection pump. Refer to Disassembly and Assembly, "Fuel Injection Pump - Install" for the correct procedure.