GEAR 1477131 - Caterpillar

Illustration 1 g01335378
Typical example
Note: Before assembly, lubricate the components with clean engine oil. (1) Tighten the setscrews for the housing of the rocker shaft to the following torque.C1.1 ... 10 N m (89 lb in)C1.5 and C2.2 ... 10 N m (89 lb in) (2) Tighten the nuts for the housing of the rocker shaft to the following torque.C1.1 ... 23 N m (17 lb ft)C1.5 and C2.2 ... 33 N m (24 lb ft) (3) Housing for the rocker shaft assembly
Illustration 2 g00819413
Typical example
(4) Rocker shaftC1.1Diameter of the rocker shaft ... 11.65 to 11.67 mm (0.4587 to 0.4595 inch)Service limit ... 11.57 mm (0.4555 inch)C1.5 and C2.2Diameter of the rocker shaft ... 14.95 to 14.97 mm (0.5886 to 0.5894 inch)Service limit ... 14.87 mm (0.5854 inch) (5) Stud
Illustration 3 g00819419
Typical example
(6) Tighten the locknut to the following torque. ... 14 N m (124 lb in) (7) Adjustment screw for the rocker arm (8) Rocker arm (9) Rocker arm clearance on the rocker shaftC1.1Minimum permissible clearance ... 0.032 to 0.068 mm (0.00126 to 0.00268 inch)C1.5 and C2.2Minimum permissible clearance ... 0.030 to 0.093 mm (0.00120 to 0.00366 inch)Maximum permissible clearance (All models) ... 0.2 mm (0.008 inch)