HARNESS AS-CHASSIS 5088997 - Caterpillar

5088997 HARNESS AS-CHASSIS Caterpillar parts

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA5088997
508-8997
5088997

Weight: 11 pounds 5 kg.

Buy HARNESS AS-CHASSIS 5088997 Caterpillar genuine, new aftermarket tractor parts with delivery

Number on catalog scheme: 26

Caterpillar 5088997 Parts scheme HARNESS AS-CHASSIS

For full view, you need register

Information:

Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7575 Link Bracket 2 Start By:
Remove the fan drive mounting group. Refer to Disassembly and Assembly, "Fan Drive Mounting Group - Remove and Install".
Remove the valve mechanism cover base. Refer to Disassembly and Assembly, "Valve Mechanism Cover Base - Remove and Install".
Remove the turbochargers. Refer to Disassembly and Assembly, "Turbocharger - Remove".
Remove the electronic unit injectors. Refer to Disassembly and Assembly, "Electronic Unit Injector - Remove".
Remove the precooler. Refer to Disassembly and Assembly, "Precooler - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Illustration 1 g01018266
Remove air tube assembly (1). Disconnect hose assembly (2). Cut all cable straps that connect harness assembly (3) to the cylinder head. Move harness assembly aside.
Illustration 2 g01018267
Disconnect hose assemblies (5) and (6). Disconnect clamp (4) from the cylinder head. Remove bolts (7).
Illustration 3 g01018269
Disconnect the following items: clip (8), wire assembly (10) and harness assembly from sensor (12). Disconnect hose assembly (9) from the cylinder head. Remove bolt (11).
Illustration 4 g01018271
Disconnect harness assembly (14).
Illustration 5 g01018505
Remove cylinder head bolts (19).
Attach Tooling (A) and a suitable lifting device to the cylinder head. Carefully remove the cylinder head from the cylinder block. The weight of the cylinder head is approximately 184 kg (405 lb).