BFFVZ00 Lafayette 3608 Engine Caterpillar parts
3608
Rating:
Alternative (cross code) number:
CABFFVZ00
BFF-VZ00
BFFVZ00
CABFFVZ00
BFF-VZ00
BFFVZ00
MARINE AUXILIARY,
Compatible equipment models: BFFVZ00:
For full view, you need register
Information:
284-2175 Front Fender Gp
These narrow steel fenders replace the standard fenders. All rubber components that could deteriorate with high temperatures are removed. 284-2176 Loader Frame Gp
This group adds the weld studs for the Guard GP to the loader frame. 286-3807 Power Train Electronic Control Module
This is software for the control module that is used on the Steel Mill Arrangement. 303-4010 Brake Control Conversion Ar (Parking)
The 303-4010 Brake Control Conversion Ar (PARKING) provides new bearings in order to avoid locking the lever that is in the brake control group.Operation of the Parking Brake Override
Illustration 1 g01338871
Rear view of machine (A) Override switches for the parking brake and auxiliary engine shutdown
Illustration 2 g01338889
Override switches and indicator for parking brake (B) Override switch for the parking brake (C) Override indicator for the parking brake (D) Auxiliary engine shutdown switchYour 980H Wheel Loader comes with a parking brake system that is activated by a spring and released hydraulically. If the machine stalls the switch for the parking brake release can be activated so the machine can be towed. The switch for the parking brake release is located in the rear grill of the machine. In order to access the switch, flip up the switch guard. Move the switch upward in order to release the parking brake. An auxiliary accumulator stores hydraulic pressure which releases the parking brake when the switch is activated.The parking brake override also has a test mode. Move the switch downward in order to enter the test mode. The green indicator should light indicating that the system is working correctly. Test the parking brake override daily. If the green indicator lamp does not light, contact your local dealer for service. The machine should not be put back into operation until this issue is resolved. When the test is completed, make sure that the toggle switch is put back into the center position. Make sure that the guard for the switch is closed in order to protect the switch.Note: Make sure that the parking brake override is not activated when you park the machine. Close the switch guard in order to deactivate the switch. When the switch guard is closed, the override switch is
These narrow steel fenders replace the standard fenders. All rubber components that could deteriorate with high temperatures are removed. 284-2176 Loader Frame Gp
This group adds the weld studs for the Guard GP to the loader frame. 286-3807 Power Train Electronic Control Module
This is software for the control module that is used on the Steel Mill Arrangement. 303-4010 Brake Control Conversion Ar (Parking)
The 303-4010 Brake Control Conversion Ar (PARKING) provides new bearings in order to avoid locking the lever that is in the brake control group.Operation of the Parking Brake Override
Illustration 1 g01338871
Rear view of machine (A) Override switches for the parking brake and auxiliary engine shutdown
Illustration 2 g01338889
Override switches and indicator for parking brake (B) Override switch for the parking brake (C) Override indicator for the parking brake (D) Auxiliary engine shutdown switchYour 980H Wheel Loader comes with a parking brake system that is activated by a spring and released hydraulically. If the machine stalls the switch for the parking brake release can be activated so the machine can be towed. The switch for the parking brake release is located in the rear grill of the machine. In order to access the switch, flip up the switch guard. Move the switch upward in order to release the parking brake. An auxiliary accumulator stores hydraulic pressure which releases the parking brake when the switch is activated.The parking brake override also has a test mode. Move the switch downward in order to enter the test mode. The green indicator should light indicating that the system is working correctly. Test the parking brake override daily. If the green indicator lamp does not light, contact your local dealer for service. The machine should not be put back into operation until this issue is resolved. When the test is completed, make sure that the toggle switch is put back into the center position. Make sure that the guard for the switch is closed in order to protect the switch.Note: Make sure that the parking brake override is not activated when you park the machine. Close the switch guard in order to deactivate the switch. When the switch guard is closed, the override switch is