Lafayette 3616 Engine CVBVM00 - Caterpillar

Be sure no one is working on or near the machine to prevent injury. Keep the machine under control at all times to prevent injury.Reduce engine speed when maneuvering in tight quarters or when breaking over a rise.Select the speed range necessary before starting downgrade. Do not change gears while going downhill.A good practice is to use the same speed range going downgrade that would be used to go up the grade.Do not allow the engine to overspeed downhill. Release the travel pedals, to apply the brakes, to reduce engine overspeed going downhill.When the load will be pushing the machine, use the slow speed range before starting downhill.1. Adjust the operator's seat.2. Fasten the seat belt.3. Raise all lowered attachments enough to clear any obstructions. 4. Release the travel pedals to apply the brakes. 5. Select the required speed range. 6. Move the direction pedal to the desired direction and speed. 7. Move the governor control lever to the desired engine speed.Speed and/or Directional Changes
LOW to HIGH speed and directional changes at full engine speed are possible. However, for operator comfort and maximum service life of power train components, decelerating to a stop, when changing directions or to low or high speed is recommended. 1. Release the directional pedals to apply the brakes. 2. Move the transmission speed switch to the desired speed. 3. Push down on the desired directional pedal.