NUT 0005452 - Caterpillar

Use the 198-4237 Pressure Sensor (0 to 3450 kPa (0 to 500 psi)) of the 198-4240 Pressure Indicator Gp (Digital) in place of the 8T-0855 Pressure Gauge (0 to 4,000 kPa (0 to 580 psi)). Use the 198-4038 Pressure Sensor (0 to 34500 kPa (0 to 5000 psi)) of the 198-4240 Pressure Indicator Gp (Digital) in place of the 8T-0859 Pressure Gauge (0 to 25000 kPa (0 to 3600 psi)).Use the 198-4039 Pressure Sensor (0 to 69000 kPa (0 to 10000 psi)) of the 198-4240 Digital Pressure Indicator in place of the 8T-0861 Pressure Gauge (0 to 60000 kPa (0 to 8700 psi)). 131-5050 DataView Tool Gp
Table 9
REQUIRED TOOLS    
Part Number     Description     Quantity    
131-5050     DataView Tool Gp     1    
143-4065     Pressure Sensor (0 to 6900 kPa (0 to 1000 psi))     Up to 6    
143-4066     Pressure Sensor (0 to 51,700 kPa (0 to 7500 psi))     2    
6V-4143     Coupler     Up to 8    Use the 143-4065 Pressure Sensor (0 to 6900 kPa (0 to 1000 psi)) in place of the 8T-0855 Pressure Gauge (0 to 4,000 kPa (0 to 580 psi)). Use the 143-4066 Pressure Sensor (0 to 51,700 kPa (0 to 7500 psi)) in place of the 8T-0859 Pressure Gauge (0 to 25000 kPa (0 to 3600 psi)) and of 8T-0861 Pressure Gauge (0 to 60000 kPa (0 to 8700 psi)).Perform the following procedure in order to prepare the pressure sensors for testing with the 131-5050 DataView Tool Gp .
Illustration 13 g00793053
Apply 5P-3413 Pipe Sealant to the pipe threads of pressure sensor (2) .
Install 6V-3014 Coupler (1) onto the pressure sensor.Drive Motor Speed
131-5050 Dataview Tool Gp
Table 10
REQUIRED TOOLS    
Part Number     Description     Quantity    
131-5050     DataView Tool Gp     1    
211-1773     Adapter Cable     1    
153-9625     Sensor Adapter (Pulse Width Modulated)     1    Note: This procedure does not differentiate between positive speed (FORWARD) and negative speed (REVERSE). The direction of the motor will need to be determined by the direction of track travel.
Illustration 14 g00840296
Remove four bolts (2) and washers. Remove access panel (1) .
Illustration 15 g00840297
Disconnect connector (3) from speed sensor (4) .
Illustration 16 g00840298
Install adapter cable (5) between the connector and the speed sensor.
Connect the cable adapter to the sensor adapter.
Connect the sensor adapter to the DataView tool group.
Set the parameters for this channel in order to achieve the true motor speed.
For the following machines, divide the frequency by 58.
D3G: CFC1-Up and CFF1-Up
For the following machines, divide the frequency by 67.
D4G: CFN1-Up and FDC1-Up
D5G: FDH1-Up and FDW1-Up