PLATE AS 3796619 - Caterpillar

Disconnect hose assemblies (73). Disconnect clip (74).
Illustration 43 g03719173
Disconnect cable assembly (75) and ground cable (76) from the alternator.
Illustration 44 g03719176
Remove elbow (77). Disconnect hose (78).
Illustration 45 g03719233
Disconnect hose (79) and hose (81). Disconnect hose assembly (80).
Illustration 46 g03719242
Remove elbow (82).
Disconnect hose assembly (83).
Illustration 47 g03719247
Disconnect hose assemblies (84).
Illustration 48 g03719253
Disconnect hose (85).
Illustration 49 g03719257
Illustration 50 g03719260
Attach Tooling (B) to transmission (86). Attach Tooling (B) to Tooling (C) and a suitable lifting device. Attach a suitable lifting device to the lifting points on engine (87) and to Tooling (C). The combined weight of engine (87), transmission (86), the torque converter, and the output transfer gears is approximately 3334 kg (7350 lb).
Illustration 51 g03719300
Lower compactor guard (88).
Illustration 52 g03719304
Remove two bolts (89) (not shown) and the washers.
Illustration 53 g03719311
Remove bolts (90) and the washers.
Illustration 54 g03719314
Left side of the machine.
Remove nut (91), the washers, and the bolt. Repeat this step for the opposite side of the machine.
Illustration 55 g03719324
Raise the engine, the transmission, the torque converter, and the output transfer gears until support assembly (93) is visible, as shown in Illustration 55. Attach a suitable lifting device to support assembly (93). The weight of support assembly (93) is approximately 55 kg (121 lb). Remove bolts (92) and the washers, and the spacers. Use the suitable lifting device in order to remove support assembly (93). Repeat this step for the opposite side of the machine.
Illustration 56 g03719257
Illustration 57 g03719260
Use Tooling (B), Tooling (C), and the suitable lifting device in order to remove engine (87), transmission (86), the torque converter, and the output transfer gears.