FRAME AND BODY
ENCLOSURE GPFENDER GP
FRAME GP
FRAME AND BODY
ENCLOSURE GP
#SEBP25360610
113-2538: ENCLOSURE GP-ENGINE
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 127-2269 | [1] | ANGLE AS (LH) | |
| 127-1059 | [1] | ANGLE AS (RH) | ||
| 2. | 6T-9509 | [2] | HINGE AS | |
| 3. | 124-0236 | [1] | HOOD AS | |
| 1F-0748 | [7] | NUT-WELD (1/2-13-THD) | ||
| 1F-0750 | [24] | NUT-WELD (3/8-16-THD) | ||
| 3J-5169 | [1] | NUT-WELD (5/8-11-THD) | ||
| 4. | 126-1074 | [2] | HANDRAIL | |
| 5. | 2D-6235 | [2] | LOCKNUT (1/4-20-THD) | |
| 6. | 299-2205 C | [1] | SHIELD | |
| 7. | 6T-9510 | [2] | HINGE AS | |
| 8. | 5P-7211 D | SEAL (0.68-M EACH) | ||
| 9. | 7T-8201 | [2] | BLOCK | |
| 10. | 127-1056 | [1] | PLATE AS (LH) | |
| 127-1054 | [1] | PLATE AS (RH) | ||
| 11. | 5M-3062 | [32] | BOLT (3/8-16X0.75-IN) | |
| 12. | 5P-1075 | [28] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 13. | 114-0399 | [1] | PLATE AS (RH) | |
| 7G-4928 | [2] | SPACER | ||
| 14. | 8T-4896 | [12] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 15. | 5S-7382 | [4] | BOLT (3/8-16X1.375-IN) | |
| 16. | 8T-2561 | [4] | WASHER-HARD (10.5X28.5X5-MM THK) | |
| 17. | 8T-9377 | [4] | BOLT (3/8-16X2.25-IN) | |
| 18. | 7T-7208 | [2] | DOOR AS | |
| (EACH INCLUDES) | ||||
| 1F-0750 | [6] | NUT-WELD (3/8-16-THD) | ||
| 3G-9190 | [2] | PLATE | ||
| 6P-9116 | [2] | SPACER (0.824X1.05X4.19-IN THK) | ||
| 19. | 8T-4123 B | [4] | WASHER (22X35X3.5-MM THK) | |
| 20. | 5P-7483 D | SEAL (0.63-M EACH) | ||
| 20A. | 5P-7483 D | SEAL (1.06-M EACH) | ||
| 21. | 9W-8084 | [2] | PAWL | |
| 22. | 8T-9496 | [4] | LOCKNUT (9/16-18-THD) | |
| 23. | 9W-9044 | [2] | PLATE | |
| 24. | 9W-8081 | [1] | PLATE AS (RH) | |
| 1F-0750 | [3] | NUT-WELD (3/8-16-THD) | ||
| 25. | 7T-7213 | [2] | PLATE (LH) | |
| 26. | 7T-7214 | [2] | PLATE | |
| 27. | 9W-8083 | [1] | PLATE AS (LH) | |
| 1F-0750 | [3] | NUT-WELD (3/8-16-THD) | ||
| 28. | 9W-5290 | [2] | PLATE AS | |
| 29. | 9W-6986 | [1] | PLATE AS | |
| 1F-0750 | [6] | NUT-WELD (3/8-16-THD) | ||
| 30. | 9W-6987 | [1] | PLATE AS | |
| 1F-0750 | [6] | NUT-WELD (3/8-16-THD) | ||
| 31. | 9W-8940 | [2] | PLATE | |
| 32. | 8Y-4000 | [2] | LATCH AS (T-BAR, COMPARTMENT) | |
| (EACH INCLUDES) | ||||
| 6H-3956 | [1] | PIN | ||
| 7X-0766 | [1] | SPRING-LATCH | ||
| 8Y-3966 | [1] | WASHER (14.7X35X1.57-MM THK) | ||
| 8Y-3998 | [1] | HANDLE-LATCH | ||
| 8Y-3999 | [1] | BRACKET-MOUNTING | ||
| 8Y-8306 | [1] | SHAFT-LATCH | ||
| 33. | 6V-1193 | [12] | SCREW-HEX SOCKET (3/8-16X0.625-IN) | |
| 34. | 2K-4973 | [4] | LOCKNUT (3/8-16-THD) | |
| 35. | 4L-6454 | [4] | BOLT (3/8-16X1-IN) | |
| 36. | 4H-2558 | [2] | GROMMET | |
| 37. | 114-0401 | [1] | PLATE AS (LH) | |
| 7G-4928 | [2] | SPACER | ||
| 38. | 3V-9399 | [2] | ROD AS | |
| (EACH INCLUDES) | ||||
| 4B-4278 | [2] | WASHER (10.2X20.5X1.6-MM THK) | ||
| 39. | 4M-7470 | [2] | GROMMET | |
| 40. | 246-2641 | [2] | PADLOCK GP | |
| (EACH INCLUDES) | ||||
| 5P-8500 | [1] | KEY | ||
| 41. | 3B-4605 | [2] | PIN-COTTER | |
| 42. | 4B-4278 | [2] | WASHER (10.2X20.5X1.6-MM THK) | |
| 43. | 1H-3337 | [2] | BOLT (1/4-20X0.875-IN) | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| D | ORDER BY THE METER | |||
#SEBP25360611
246-4504: ENCLOSURE GP-ENGINE
246-4504 ENCLOSURE GP-ENGINE
S/N 9EM1-UP
PART OF 246-5227 MACHINE AR-HIGH AMBIENT TEMP
AN ATTACHMENT
S/N 9EM1-UP
PART OF 246-5227 MACHINE AR-HIGH AMBIENT TEMP
AN ATTACHMENT
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3V-9399 | [2] | ROD AS | |
| (EACH INCLUDES) | ||||
| 1A. | 4B-4278 | [2] | WASHER (10.2X20.5X1.6-MM THK) | |
| 3. | 246-2641 | [2] | PADLOCK GP | |
| (EACH INCLUDES) | ||||
| 5P-8500 | [1] | KEY | ||
| 4. | 6T-9509 | [2] | HINGE AS | |
| 5. | 6T-9510 | [2] | HINGE AS | |
| 6. | 7T-7213 | [2] | PLATE (LH) | |
| 7. | 7T-7214 | [2] | PLATE | |
| 8. | 8T-9496 | [4] | LOCKNUT (9/16-18-THD) | |
| 9. | 8Y-4000 | [2] | LATCH AS (T-BAR, COMPARTMENT) | |
| 10. | 9W-5290 | [2] | PLATE AS | |
| 11. | 9W-6986 | [1] | PLATE AS (RH) | |
| 1F-0750 | [6] | NUT-WELD (3/8-16-THD) | ||
| 12. | 9W-6987 | [1] | PLATE AS | |
| 1F-0750 | [6] | NUT-WELD (3/8-16-THD) | ||
| 13. | 9W-8081 | [1] | PLATE AS (RH) | |
| 1F-0750 | [3] | NUT-WELD (3/8-16-THD) | ||
| 14. | 9W-8083 | [1] | PLATE AS (LH) | |
| 1F-0750 | [3] | NUT-WELD (3/8-16-THD) | ||
| 15. | 9W-8084 | [2] | PAWL | |
| 16. | 9W-9044 | [2] | PLATE | |
| 17. | 114-0399 | [1] | PLATE AS (RH) | |
| 7G-4928 | [2] | SPACER | ||
| 18. | 114-0401 | [1] | PLATE AS (LH) | |
| 7G-4928 | [2] | SPACER | ||
| 19. | 127-1054 | [1] | PLATE AS (RH) | |
| 6B-4594 | [7] | RIVET | ||
| 20. | 127-1056 | [1] | PLATE AS (LH) | |
| 6B-4594 | [7] | RIVET | ||
| 21. | 127-1059 | [1] | ANGLE AS (RH) | |
| 22. | 127-2269 | [1] | ANGLE AS (LH) | |
| 23. | 143-7726 | [1] | PLATE AS (RH) | |
| 24. | 143-7730 | [2] | BAFFLE AS | |
| 25. | 205-7758 | [1] | DOOR AS (LH) | |
| 26. | 205-7759 | [1] | DOOR AS (RH) | |
| 27. | 242-5428 | [1] | HOOD AS | |
| 28. | 264-3035 | [1] | PLATE AS (LH) | |
| 29. | 299-2205 | [1] | SHIELD | |
| 30. | 1H-3337 | [2] | BOLT (1/4-20X0.875-IN) | |
| 31. | 2D-6235 | [2] | LOCKNUT (1/4-20-THD) | |
| 32. | 2K-4973 | [4] | LOCKNUT (3/8-16-THD) | |
| 33. | 3B-4605 | [2] | PIN-COTTER | |
| 34. | 4H-2558 | [2] | GROMMET | |
| 35. | 4L-6454 | [8] | BOLT (3/8-16X1-IN) | |
| 36. | 4L-6459 | [4] | BOLT (3/8-16X2.5-IN) | |
| 37. | 4M-7470 | [2] | GROMMET | |
| 38. | 5M-3062 | [28] | BOLT (3/8-16X0.75-IN) | |
| 39. | 5P-1075 | [32] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 40. | 5S-7382 | [4] | BOLT (3/8-16X1.375-IN) | |
| 41. | 6V-1193 | [12] | SCREW-HEX SOCKET (3/8-16X0.625-IN) | |
| 42. | 6V-8801 | [4] | NUT (3/8-16-THD) | |
| 43. | 7T-8201 | [2] | BLOCK | |
| 44. | 8T-2502 | [4] | BOLT (3/8-16X1.125-IN) | |
| 45. | 8T-2561 | [4] | WASHER-HARD (10.5X28.5X5-MM THK) | |
| 46. | 8T-4123 | [4] | WASHER (22X35X3.5-MM THK) | |
| 47. | 8T-4226 | [4] | WASHER-PLATED (10.5X45X3-MM THK) | |
| 48. | 8T-4896 | [12] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 49. | 9W-8940 | [2] | PLATE | |
| 50. | 5P-7211 D | SEAL (0.7-M EACH) | ||
| 51. | 5P-7483 D | SEAL (1.1-M EACH) | ||
| 51A. | 5P-7483 D | SEAL (0.7-M EACH) | ||
| D | ORDER BY THE METER | |||
#SEBP25360612
373-4737: ENCLOSURE GP-ENGINE
373-4737 ENCLOSURE GP-ENGINE
S/N 9EM7400-9215
PART OF 103-0128 CHASSIS AR, 384-2851 CONVERSION AR-MACHINE
ALSO AN ATTACHMENT
S/N 9EM7400-9215
PART OF 103-0128 CHASSIS AR, 384-2851 CONVERSION AR-MACHINE
ALSO AN ATTACHMENT
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3V-9399 | [2] | ROD AS | |
| (EACH INCLUDES) | ||||
| 4B-4278 | [2] | WASHER (10.2X20.5X1.6-MM THK) | ||
| 2. | 4B-4278 | [2] | WASHER (10.2X20.5X1.6-MM THK) | |
| 3. | 6T-9509 | [2] | HINGE AS | |
| 4. | 6T-9510 | [2] | HINGE AS | |
| 5. | 6T-9927 | [2] | SLIDE | |
| 6. | 6T-9928 | [2] | PLATE | |
| 7. | 6T-9929 | [2] | PLATE | |
| 8. | 7T-7213 | [2] | PLATE (LH) | |
| 9. | 8T-9496 | [4] | LOCKNUT (9/16-18-THD) | |
| 10. | 8Y-4000 | [2] | LATCH AS (T-BAR, COMPARTMENT) | |
| 11. | 9P-3066 | [2] | MOUNTING | |
| 12. | 9W-5290 | [2] | PLATE AS | |
| 13. | 9W-8081 | [1] | PLATE AS (RH) | |
| 1F-0750 | [3] | NUT-WELD (3/8-16-THD) | ||
| 14. | 9W-8083 | [1] | PLATE AS (LH) | |
| 1F-0750 | [3] | NUT-WELD (3/8-16-THD) | ||
| 15. | 9W-8084 | [2] | PAWL | |
| 16. | 9W-8940 | [2] | PLATE | |
| 17. | 9W-9044 | [2] | PLATE | |
| 18. | 114-0399 | [1] | PLATE AS (RH) | |
| 19. | 114-0401 | [1] | PLATE AS (LH) | |
| (EACH PLATE AS INCLUDES) | ||||
| 7G-4928 | [2] | SPACER | ||
| 20. | 127-1054 | [1] | PLATE AS (RH) | |
| 21. | 127-1056 | [1] | PLATE AS (LH) | |
| (EACH PLATE AS INCLUDES) | ||||
| 6B-4594 | [7] | RIVET | ||
| 22. | 127-1059 | [1] | ANGLE AS (RH) | |
| 23. | 127-2269 | [1] | ANGLE AS (LH) | |
| 24. | 143-7730 | [2] | BAFFLE AS | |
| 25. | 155-1142 | [2] | WASHER (17X71X5-MM THK) | |
| 26. | 373-4738 | [1] | COVER | |
| 27. | 376-0544 | [1] | HOOD AS-ENGINE | |
| 28. | 376-4873 | [1] | DOOR AS (LH) | |
| 29. | 376-4874 | [1] | DOOR AS (RH) | |
| 30. | 377-1632 Y | [1] | GUARD GP-ENGINE (LOWER, LH) | |
| 31. | 377-1633 Y | [1] | GUARD GP-ENGINE (LOWER, RH) | |
| 34. | 2K-4973 | [4] | LOCKNUT (3/8-16-THD) | |
| 35. | 4H-2558 | [2] | GROMMET | |
| 36. | 4L-6454 | [16] | BOLT (3/8-16X1-IN) | |
| 37. | 4L-6459 | [4] | BOLT (3/8-16X2.5-IN) | |
| 38. | 4M-7470 | [2] | GROMMET | |
| 39. | 5M-3062 | [34] | BOLT (3/8-16X0.75-IN) | |
| 40. | 5P-1075 | [36] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 41. | 5P-1076 | [4] | WASHER-HARD (13.5X30X4-MM THK) | |
| 42. | 5P-2566 | [2] | BOLT (1/2-13X1.5-IN) | |
| 43. | 5S-7382 | [4] | BOLT (3/8-16X1.375-IN) | |
| 44. | 6P-8269 | [1] | WASHER (20.5X88X6-MM THK) | |
| 45. | 6T-9807 | [2] | GROMMET (22-MM ID) | |
| 46. | 6T-9808 | [2] | SUPPORT | |
| 47. | 6V-1193 | [12] | SCREW-HEX SOCKET (3/8-16X0.625-IN) | |
| 48. | 6V-8801 | [4] | NUT (3/8-16-THD) | |
| 49. | 6V-9197 | [2] | LOCK PIN | |
| 50. | 7T-8201 | [2] | BLOCK | |
| 51. | 7X-0328 | [4] | BOLT (1/2-13X3.5-IN) | |
| 52. | 7X-0344 | [8] | BOLT (5/8-11X1.375-IN) | |
| 53. | 7X-0515 | [9] | WASHER-HARD (17X35X5-MM THK) | |
| 54. | 8T-2502 | [4] | BOLT (3/8-16X1.125-IN) | |
| 55. | 8T-2561 | [4] | WASHER-HARD (10.5X28.5X5-MM THK) | |
| 56. | 8T-4123 | [4] | WASHER (22X35X3.5-MM THK) | |
| 57. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 58. | 8T-4226 | [4] | WASHER-PLATED (10.5X45X3-MM THK) | |
| 59. | 8T-4896 | [18] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 60. | 8T-4897 | [4] | WASHER (10.2X35X6-MM THK) | |
| 61. | 8T-9396 | [1] | BOLT (5/8-11X3.25-IN) | |
| 62. | 5P-7211 D | SEAL (0.7-M EACH) | ||
| 62A. | 5P-7211 D | SEAL (0.6-M) | ||
| 63. | 5P-7483 D | SEAL (1-M EACH) | ||
| 63A. | 5P-7483 D | SEAL (0.6-M EACH) | ||
| D | ORDER BY THE METER | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25360613
373-4737: ENCLOSURE GP-ENGINE
373-4737 ENCLOSURE GP-ENGINE
S/N 9EM9216-UP
PART OF 103-0128 CHASSIS AR, 384-2851 CONVERSION AR-MACHINE
ALSO AN ATTACHMENT
S/N 9EM9216-UP
PART OF 103-0128 CHASSIS AR, 384-2851 CONVERSION AR-MACHINE
ALSO AN ATTACHMENT
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3V-9399 | [2] | ROD AS | |
| (EACH INCLUDES) | ||||
| 4B-4278 | [2] | WASHER (10.2X20.5X1.6-MM THK) | ||
| 2. | 4B-4278 | [2] | WASHER (10.2X20.5X1.6-MM THK) | |
| 3. | 6T-9509 | [2] | HINGE AS | |
| 4. | 6T-9510 | [2] | HINGE AS | |
| 5. | 6T-9927 | [2] | SLIDE | |
| 6. | 6T-9928 | [2] | PLATE | |
| 7. | 6T-9929 | [2] | PLATE | |
| 8. | 7T-7213 | [2] | PLATE (LH) | |
| 9. | 8T-9496 | [4] | LOCKNUT (9/16-18-THD) | |
| 10. | 8Y-4000 | [2] | LATCH AS (T-BAR, COMPARTMENT) | |
| 11. | 9P-3066 | [2] | MOUNTING | |
| 12. | 9W-5290 | [2] | PLATE AS | |
| 13. | 9W-8081 | [1] | PLATE AS (RH) | |
| 1F-0750 | [3] | NUT-WELD (3/8-16-THD) | ||
| 14. | 9W-8083 | [1] | PLATE AS (LH) | |
| 1F-0750 | [3] | NUT-WELD (3/8-16-THD) | ||
| 15. | 9W-8084 | [2] | PAWL | |
| 16. | 9W-8940 | [2] | PLATE | |
| 17. | 9W-9044 | [2] | PLATE | |
| 18. | 114-0399 | [1] | PLATE AS (RH) | |
| 19. | 114-0401 | [1] | PLATE AS (LH) | |
| (EACH PLATE AS INCLUDES) | ||||
| 7G-4928 | [2] | SPACER | ||
| 20. | 127-1054 | [1] | PLATE AS (RH) | |
| 21. | 127-1056 | [1] | PLATE AS (LH) | |
| (EACH PLATE AS INCLUDES) | ||||
| 6B-4594 | [7] | RIVET | ||
| 22. | 127-1059 | [1] | ANGLE AS (RH) | |
| 23. | 127-2269 | [1] | ANGLE AS (LH) | |
| 24. | 143-7730 | [2] | BAFFLE AS | |
| 25. | 155-1142 | [2] | WASHER (17X71X5-MM THK) | |
| 26. | 373-4738 | [1] | COVER | |
| 27. | 376-0544 | [1] | HOOD AS-ENGINE | |
| 28. | 390-8503 C | [1] | DOOR AS-ACCESS (LH) | |
| 29. | 390-8506 C | [1] | DOOR AS-ACCESS (RH) | |
| 30. | 377-1632 Y | [1] | GUARD GP-ENGINE (LOWER, LH) | |
| 31. | 377-1633 Y | [1] | GUARD GP-ENGINE (LOWER, RH) | |
| 34. | 2K-4973 | [4] | LOCKNUT (3/8-16-THD) | |
| 35. | 4H-2558 | [2] | GROMMET | |
| 36. | 4L-6454 | [16] | BOLT (3/8-16X1-IN) | |
| 37. | 4L-6459 | [4] | BOLT (3/8-16X2.5-IN) | |
| 38. | 4M-7470 | [2] | GROMMET | |
| 39. | 5M-3062 | [34] | BOLT (3/8-16X0.75-IN) | |
| 40. | 5P-1075 | [36] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 41. | 5P-1076 | [4] | WASHER-HARD (13.5X30X4-MM THK) | |
| 42. | 5P-2566 | [2] | BOLT (1/2-13X1.5-IN) | |
| 43. | 5S-7382 | [4] | BOLT (3/8-16X1.375-IN) | |
| 44. | 6P-8269 | [1] | WASHER (20.5X88X6-MM THK) | |
| 45. | 6T-9807 | [2] | GROMMET (22-MM ID) | |
| 46. | 6T-9808 | [2] | SUPPORT | |
| 47. | 6V-1193 | [12] | SCREW-HEX SOCKET (3/8-16X0.625-IN) | |
| 48. | 6V-8801 | [4] | NUT (3/8-16-THD) | |
| 49. | 6V-9197 | [2] | LOCK PIN | |
| 50. | 7T-8201 | [2] | BLOCK | |
| 51. | 7X-0328 | [4] | BOLT (1/2-13X3.5-IN) | |
| 52. | 7X-0344 | [8] | BOLT (5/8-11X1.375-IN) | |
| 53. | 7X-0515 | [9] | WASHER-HARD (17X35X5-MM THK) | |
| 54. | 8T-2502 | [4] | BOLT (3/8-16X1.125-IN) | |
| 55. | 8T-2561 | [4] | WASHER-HARD (10.5X28.5X5-MM THK) | |
| 56. | 8T-4123 | [4] | WASHER (22X35X3.5-MM THK) | |
| 57. | 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 58. | 8T-4226 | [4] | WASHER-PLATED (10.5X45X3-MM THK) | |
| 59. | 8T-4896 | [18] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 60. | 8T-4897 | [4] | WASHER (10.2X35X6-MM THK) | |
| 61. | 8T-9396 | [1] | BOLT (5/8-11X3.25-IN) | |
| 62. | 5P-7211 D | SEAL (0.7-M EACH) | ||
| 62A. | 5P-7211 D | SEAL (0.6-M) | ||
| 63. | 5P-7483 D | SEAL (1-M EACH) | ||
| 63A. | 5P-7483 D | SEAL (0.6-M EACH) | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| D | ORDER BY THE METER | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP25360614
6Y-3514: ENCLOSURE GP-HYDRAULIC TANK
6Y-3514 ENCLOSURE GP-HYDRAULIC TANK
S/N 9EM1-782
PART OF 103-0128 CHASSIS AR
S/N 9EM1-782
PART OF 103-0128 CHASSIS AR
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 104-9284 C | [1] | PLATE AS | |
| 1F-0750 | [2] | NUT-WELD (3/8-16-THD) | ||
| 2. | 9B-2052 | [1] | HINGE | |
| 3. | 4K-8501 | [2] | CLIP | |
| 4. | 7G-9913 | [1] | DOOR | |
| 5. | 104-9285 C | [2] | COVER AS | |
| 1F-0750 | [2] | NUT-WELD (3/8-16-THD) | ||
| 6. | 104-9286 C | [1] | PLATE AS | |
| 1F-0750 | [2] | NUT-WELD (3/8-16-THD) | ||
| 9B-2923 | [2] | HINGE | ||
| 7. | 5P-1075 | [18] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 8. | 1K-8850 | [1] | SPRING | |
| 9. | 5P-8502 | [1] | PADLOCK GP | |
| 8Y-6364 A | [1] | SLEEVE | ||
| 5P-8500 A | [2] | KEY | ||
| 10. | 5S-7379 C | [18] | BOLT (3/8-16X0.875-IN) | |
| 11. | 8E-8566 | [2] | BRACKET AS | |
| (EACH INCLUDES) | ||||
| 9F-2978 B | NUT-WELD (3/8-16-THD) | |||
| A | NOT PART OF THIS GROUP | |||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP25360615
6Y-3514: ENCLOSURE GP-HYDRAULIC TANK
6Y-3514 ENCLOSURE GP-HYDRAULIC TANK
S/N 9EM783-UP
PART OF 103-0128 CHASSIS AR
S/N 9EM783-UP
PART OF 103-0128 CHASSIS AR
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1K-8850 | [1] | SPRING | |
| 2. | 8E-8566 | [2] | BRACKET AS | |
| (EACH INCLUDES) | ||||
| 1F-0750 | [1] | NUT-WELD (3/8-16-THD) | ||
| 3. | 104-9284 | [1] | PLATE AS | |
| 1F-0750 | [1] | NUT-WELD (3/8-16-THD) | ||
| 4K-8501 | [2] | CLIP | ||
| 7G-9913 | [1] | DOOR | ||
| 9B-2052 | [1] | HINGE | ||
| 4. | 376-8687 | [1] | COVER AS | |
| 5. | 163-0044 C | [1] | PLATE AS | |
| 9F-2978 | [2] | NUT-WELD (3/8-16-THD) | ||
| 9B-2923 | [2] | HINGE | ||
| 6. | 5P-1075 | [18] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 7. | 5S-7379 | [18] | BOLT (3/8-16X0.875-IN) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP25360616
373-9535: FENDER GP
373-9535 FENDER GP
S/N 9EM7400-UP
PART OF 103-0128 CHASSIS AR, 384-2851 CONVERSION AR-MACHINE
ALSO AN ATTACHMENT
S/N 9EM7400-UP
PART OF 103-0128 CHASSIS AR, 384-2851 CONVERSION AR-MACHINE
ALSO AN ATTACHMENT
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3W-3896 | [2] | HANDHOLD (GRAB) | |
| 2. | 6Y-3969 | [1] | PLATE AS | |
| 1F-0750 | [6] | NUT-WELD (3/8-16-THD) | ||
| 9F-6445 | [5] | NUT-WELD (1/4-20-THD) | ||
| 3. | 6Y-4089 | [1] | SUPPORT AS | |
| 1F-0748 | [6] | NUT-WELD (1/2-13-THD) | ||
| 1F-0750 | [2] | NUT-WELD (3/8-16-THD) | ||
| 4. | 104-9316 | [1] | PLATE AS (RH) | |
| 5. | 257-5540 | [1] | PLATE AS (LH) | |
| 6. | 257-5541 | [1] | PLATE AS (RH) | |
| 7. | 374-6169 | [1] | FENDER GP (RH) | |
| 162-2480 | [12] | RIVET | ||
| 373-9536 | [1] | FENDER AS | ||
| 392-9724 | [1] | PLATE-TREAD | ||
| 393-1820 | [1] | PLATE-TREAD | ||
| 8. | 374-6170 | [1] | FENDER GP (LH) | |
| 162-2480 | [12] | RIVET | ||
| 373-9537 | [1] | FENDER AS | ||
| 392-9723 | [1] | PLATE-TREAD | ||
| 393-1819 | [1] | PLATE-TREAD | ||
| 9. | 381-3646 | [2] | COVER-FENDER | |
| 10. | 4L-6454 | [10] | BOLT (3/8-16X1-IN) | |
| 11. | 5P-1075 | [10] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 12. | 5P-1076 | [4] | WASHER-HARD (13.5X30X4-MM THK) | |
| 13. | 5P-2566 | [4] | BOLT (1/2-13X1.5-IN) | |
| 14. | 7X-0346 | [8] | BOLT (5/8-11X2-IN) | |
| 15. | 7X-0349 | [14] | BOLT (5/8-11X3-IN) | |
| 16. | 7X-0513 | [6] | WASHER-HARD (17X30X5-MM THK) | |
| 17. | 7X-0515 | [22] | WASHER-HARD (17X35X5-MM THK) | |
| 18. | 7X-0582 | [8] | WASHER-HARD (20X44.5X6-MM THK) | |
| 19. | 8C-4436 | [6] | BOLT (1/2-13X1.375-IN) | |
| 20. | 8C-6857 | [8] | BOLT (3/4-10X2.75-IN) | |
| 21. | 8E-8422 | [1] | COVER AS | |
| 22. | 8T-4122 | [4] | WASHER-HARD (17X32X3.5-MM THK) | |
| 23. | 8T-4223 | [6] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 24. | 8T-9393 | [10] | BOLT (5/8-11X1.5-IN) |
#SEBP25360617
9N-4205: FENDER GP
For full view, you need register
Parts for your D8R TRACK-TYPE TRACTOR:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3W-3896 | [2] | HANDHOLD (GRAB) | |
| 2. | 6J-0488 | [18] | SCREW-BUTTON HEAD (3/8-16X0.875-IN) | |
| 3. | 6Y-3969 | [1] | PLATE AS | |
| 1F-0750 | [6] | NUT-WELD (3/8-16-THD) | ||
| 9F-6445 | [5] | NUT-WELD (1/4-20-THD) | ||
| 7T-1099 | [2] | LINK | ||
| 4. | 6Y-4089 | [1] | SUPPORT AS | |
| 3J-7321 | [2] | PLATE | ||
| 9K-3050 | [1] | STUD-WELD | ||
| 1F-0750 | [2] | NUT-WELD (3/8-16-THD) | ||
| 1F-0748 | [6] | NUT-WELD (1/2-13-THD) | ||
| 7T-1099 | [9] | LINK | ||
| 5. | 6Y-8442 | [1] | PLATE AS (LH) | |
| 6. | 6Y-8444 | [1] | PLATE AS (RH) | |
| 7. | 9N-4207 | [1] | FENDER AS (LH) | |
| 5M-4514 | [1] | PIPE | ||
| 7T-1099 | [5] | LINK | ||
| 8T-5911 | [6] | NUT-WELD (1/2-13-THD) | ||
| 8T-5912 | [25] | NUT-WELD (3/8-16-THD) | ||
| 1F-0748 | [2] | NUT-WELD (1/2-13-THD) | ||
| 8F-9836 | [2] | BOSS (3/8-16-THD) | ||
| 8. | 9N-4206 | [1] | FENDER AS (RH) | |
| 8X-7422 | [1] | BOSS (3/8-16X2.24-IN) | ||
| 3G-2415 | [2] | BOSS | ||
| 5M-4514 | [1] | PIPE | ||
| 7T-1099 | [4] | LINK | ||
| 8F-9836 | [4] | BOSS (3/8-16-THD) | ||
| 1F-0750 | [4] | NUT-WELD (3/8-16-THD) | ||
| 8T-5911 | [8] | NUT-WELD (1/2-13-THD) | ||
| 8T-5912 | [16] | NUT-WELD (3/8-16-THD) | ||
| 1F-0748 | [2] | NUT-WELD (1/2-13-THD) | ||
| 9. | 231-2914 | [1] | PLATE (RH) | |
| 10. | 104-9316 | [1] | PLATE AS (RH) | |
| 11. | 4L-6454 | [10] | BOLT (3/8-16X1-IN) | |
| 12. | 5P-1075 | [10] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| 13. | 5P-1076 | [4] | WASHER-HARD (13.5X30X4-MM THK) | |
| 14. | 5P-2566 | [4] | BOLT (1/2-13X1.5-IN) | |
| 15. | 6Y-8557 | [2] | DOOR | |
| 16. | 7X-0346 | [8] | BOLT (5/8-11X2-IN) | |
| 17. | 7X-0349 | [14] | BOLT (5/8-11X3-IN) | |
| 18. | 7X-0513 | [6] | WASHER-HARD (17X30X5-MM THK) | |
| 19. | 7X-0515 | [22] | WASHER-HARD (17X35X5-MM THK) | |
| 20. | 7X-0582 | [8] | WASHER-HARD (20X44.5X6-MM THK) | |
| 21. | 8C-4436 | [6] | BOLT (1/2-13X1.375-IN) | |
| 22. | 8C-6857 | [8] | BOLT (3/4-10X2.75-IN) | |
| 23. | 8E-8422 | [1] | COVER AS | |
| 24. | 8T-4122 | [4] | WASHER-HARD (17X32X3.5-MM THK) | |
| 25. | 8T-4223 | [6] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 26. | 8T-9393 | [10] | BOLT (5/8-11X1.5-IN) | |
| 27. | 231-2913 | [1] | PLATE (LH) |
#SEBP25360618
200-4996: FRAME & BEARING AS
200-4996 FRAME & BEARING AS -MULTI-SHANK RIPPER
S/N 9EM1-UP
PART OF 200-4995 BAR AR-STRIKER
AN ATTACHMENT
S/N 9EM1-UP
PART OF 200-4995 BAR AR-STRIKER
AN ATTACHMENT
For full view, you need register
#SEBP25360619
201-4848: FRAME & BEARING AS
201-4848 FRAME & BEARING AS -SINGLE SHANK RIPPER
S/N 9EM1-UP
PART OF 201-4850 BAR AR-STRIKER
AN ATTACHMENT
S/N 9EM1-UP
PART OF 201-4850 BAR AR-STRIKER
AN ATTACHMENT
For full view, you need register
