COOLING SYSTEM
PUMP GP-WATERLINES GP-WATER
PUMP GP-WATER
FAN GP
COOLING SYSTEM
PUMP GP-WATER
#SEBP34080110
377-7037: KIT-WATER PUMP
377-7037 KIT-WATER PUMP
S/N AXG1-UP
S/N AXG1-UP
For full view, you need register
Parts for your 980G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 108-7930 | [1] | BEARING AS-ROLLER | ||
| 165-3929 | [1] | BOLT (3/8-16X1.5-IN) | ||
| 1A-1135 | [1] | BOLT (5/8-11X2-IN) | ||
| 136-3742 | [1] | FILTER | ||
| 111-2721 | [1] | PLUG-FELT | ||
| 136-1107 | [1] | RETAINER | ||
| 153-1256 | [1] | SEAL-LIP TYPE | ||
| 9M-3786 | [1] | SEAL-O-RING | ||
| 109-0077 | [1] | SEAL-O-RING | ||
| 122-3772 | [1] | SEAL-O-RING | ||
| 349-2654 | [1] | SEAL-WATER PUMP | ||
| 135-4928 | [1] | SHAFT-WATER PUMP | ||
| 5S-0581 | [1] | WASHER-HARD (17X38X8-MM THK) | ||
| 9M-6527 | [1] | WASHER-HARD (10.2X25.5X5-MM THK) | ||
| FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT: | ||||
| HTTP://DEALER.CAT.COM/RELATED | ||||
#SEBP34080111
390-4622: KIT-WATER PUMP GASKET
390-4622 KIT-WATER PUMP GASKET
S/N AXG1-UP
KIT CONTAINS GASKETS AND SEALS TO REINSTALL WATER PUMP AND ATTACHING LINES.
S/N AXG1-UP
KIT CONTAINS GASKETS AND SEALS TO REINSTALL WATER PUMP AND ATTACHING LINES.
For full view, you need register
Parts for your 980G II WHEEL LOADER:
CATERPILLAR SIS#SEBP34080112
173-0506: LINES GP-WATER
For full view, you need register
Parts for your 980G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1P-4278 | [14] | CLAMP-HOSE | |
| 2. | 5P-1265 | [2] | HOSE (18-CM EACH) | |
| 3. | 5P-1262 | [1] | HOSE (18-CM) | |
| 4. | 5D-1026 | [1] | CLAMP-BAND | |
| 5. | 6V-1355 | [2] | ELBOW | |
| 6. | 6V-7238 | [1] | VALVE-SHUTOFF | |
| 7. | 7X-7958 | [2] | CLAMP-HOSE | |
| 8. | 8T-6675 | [8] | CLAMP-HOSE | |
| 9. | 9Y-9236 | [1] | GAUGE-SIGHT | |
| 10. | 053-2313 | [1] | CONNECTOR | |
| 11. | 061-7208 | [1] | CLAMP-TUBE | |
| 12. | 106-4572 | [5] | HOSE-RADIATOR | |
| 13. | 135-6928 | [1] | ANGLE AS | |
| 14. | 161-0018 | [1] | HOSE | |
| 15. | 177-3262 | [1] | BRACKET | |
| 16. | 192-7431 I | [1] | HOSE AS | |
| 17. | 208-6177 | [1] | TANK GP-RADIATOR TOP | |
| 208-6179 | [1] | TANK AS-COOLANT | ||
| 17A. | 031-1119 | [1] | CAP AS-RADIATOR | |
| 18. | 209-3854 | [1] | TUBE AS | |
| 19. | 209-6949 | [1] | TUBE AS | |
| 20. | 209-6950 I | [1] | HOSE AS | |
| 21. | 209-7710 I | [1] | HOSE AS | |
| 22. | 000-7246 | [1] | ELBOW | |
| 23. | 3J-1907 | [1] | SEAL-O-RING | |
| 24. | 3J-7354 | [4] | SEAL-O-RING | |
| 25. | 3K-0360 | [1] | SEAL-O-RING | |
| 26. | 4J-5477 | [5] | SEAL-O-RING | |
| 27. | 5P-1076 | [1] | WASHER-HARD (13.5X30X4-MM THK) | |
| 28. | 5P-2228 | [1] | BOLT (1/2-13X1-IN) | |
| 29. | 6V-8397 | [2] | SEAL-O-RING | |
| 30. | 6V-8636 | [1] | CONNECTOR | |
| 31. | 6V-8647 | [1] | CONNECTOR | |
| 32. | 6V-8780 | [1] | TEE | |
| 33. | 6V-9849 | [1] | ELBOW | |
| 34. | 7D-7233 | [2] | CLIP (LOOP) | |
| 35. | 7M-8485 | [1] | SEAL-O-RING | |
| 36. | 8C-6866 | [1] | CONNECTOR | |
| 37. | 8C-6869 | [1] | CONNECTOR | |
| 38. | 8M-2770 | [2] | CLIP (LOOP) | |
| 39. | 8T-4121 | [8] | WASHER-HARD (11X21X2.5-MM THK) | |
| 40. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 41. | 8T-4191 M | [2] | BOLT (M10X1.5X16-MM) | |
| 42. | 8T-4137 M | [4] | BOLT (M10X1.5X20-MM) | |
| 43. | 8T-4196 M | [1] | BOLT (M10X1.5X35-MM) | |
| 44. | 5P-0767 E | HOSE (32.8CM) | ||
| 45. | 5P-6442 E | HOSE (66.1CM) | ||
| 45A. | 5P-6442 E | HOSE (42.7CM) | ||
| 46. | 5P-1251 E | HOSE (112CM) | ||
| 47. | 7Y-1976 E | HOSE-WATER (181CM) | ||
| E | ORDER BY THE CENTIMETER | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
#SEBP34080113
188-3965: LINES GP-WATER
For full view, you need register
Parts for your 980G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2S-0795 | [2] | GASKET | |
| 2. | 3S-9643 | [1] | SEAL-LIP TYPE (WATER TEMPERATURE REGULATOR) | |
| 3. | 4N-1156 | [1] | GASKET-REGULATOR COVER | |
| 4. | 4N-1199 | [2] | CLIP | |
| 5. | 4N-6257 | [1] | ADAPTER | |
| 6. | 248-5513 | [1] | REGULATOR-TEMPERATURE (92-DEG C) | |
| 7. | 8T-4983 | [2] | CLAMP-HOSE | |
| 8. | 9Y-2585 | [1] | COVER-WATER PUMP | |
| 9. | 9Y-4104 | [1] | HOSE | |
| 10. | 104-8583 | [1] | MANIFOLD-HOUSING | |
| 11. | 104-8584 | [1] | HOUSING-REGULATOR | |
| 12. | 104-8585 | [1] | GASKET-REGULATOR | |
| 13. | 125-0434 | [1] | SEAL-INTEGRAL | |
| 14. | 126-4935 | [1] | SEAL-INTEGRAL | |
| 15. | 264-4297 | [1] | SENSOR AS-TEMPERATURE (2-PIN)(COOLANT) | |
| 137-6645 | [1] | PAD-CONNECTOR | ||
| 16. | 133-0125 | [1] | CORE AS-ENGINE OIL COOLER | |
| 17. | 135-5577 | [1] | CORE AS-POWER TRAIN OIL COOLER | |
| 18. | 135-7076 | [1] | BONNET-INLET | |
| 19. | 205-9293 | [1] | BONNET | |
| 20. | 154-9024 | [1] | VALVE-SAMPLING | |
| 21. | 157-0670 | [1] | CAP-DUST | |
| 22. | 162-5688 | [1] | BRACKET AS | |
| 23. | 170-4673 | [1] | BONNET-INLET | |
| 24. | 194-3481 | [1] | ELBOW | |
| 25. | 0L-1351 | [2] | BOLT (3/8-16X0.875-IN) | |
| 26. | 0L-1352 | [1] | BOLT (3/8-16X3.25-IN) | |
| 27. | 0L-2070 | [2] | BOLT (3/8-16X2.25-IN) | |
| 28. | 0S-1591 | [4] | BOLT (3/8-16X1.5-IN) | |
| 29. | 0S-1608 | [5] | BOLT (3/8-16X3.75-IN) | |
| 30. | 0T-0573 | [2] | BOLT (3/8-16X2.75-IN) | |
| 31. | 109-0077 | [3] | SEAL-O-RING | |
| 32. | 109-0093 | [1] | SEAL-O-RING | |
| 33. | 112-5282 | [1] | SEAL-O-RING | |
| 34. | 1A-2029 | [4] | BOLT (3/8-16X1.125-IN) | |
| 35. | 1D-4566 | [4] | BOLT (1/2-13X3.5-IN) | |
| 36. | 4B-3388 | [1] | BOLT (5/16-18X1.125-IN) | |
| 37. | 5B-2638 | [4] | BOLT (3/8-16X5.25-IN) | |
| 38. | 5M-2894 | [15] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 39. | 7W-6534 | [1] | PLUG-PIPE | |
| 40. | 7X-7731 | [4] | PLUG-PIPE (3/4-14-THD) | |
| 41. | 8S-9089 | [6] | BOLT (1/2-13X4.5-IN) | |
| 42. | 8T-6761 | [1] | PLUG-PIPE (1-11-1/2 NPT THD) | |
| 43. | 8T-6762 | [5] | PLUG-PIPE (1/2-14-THD) | |
| 44. | 8T-6763 | [1] | PLUG-PIPE (1/4-18-THD) | |
| 45. | 8T-6767 | [1] | PLUG-PIPE (3/8-18-THD) | |
| 46. | 9M-1974 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 47. | 9S-8001 | [1] | PLUG | |
| 48. | 9X-8873 | [2] | BOLT (1/2-13X2.25-IN) | |
| 49. | 3K-0360 | [1] | SEAL-O-RING | |
| 50. | 8C-6523 | [1] | ADAPTER | |
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP34080114
100-9347: PUMP GP-WATER
100-9347 PUMP GP-WATER
S/N BET1-13537
PROVIDES CAST IRON ADAPTOR
PART OF 213-1942, 235-4691 ENGINE AR-COMPLETE
S/N BET1-13537
PROVIDES CAST IRON ADAPTOR
PART OF 213-1942, 235-4691 ENGINE AR-COMPLETE
For full view, you need register
Parts for your 980G II WHEEL LOADER:
CATERPILLAR SIS#SEBP34080115
100-9347: PUMP GP-WATER
100-9347 PUMP GP-WATER
S/N BET13538-UP
PROVIDES CAST IRON ADAPTOR
PART OF 235-4691 ENGINE AR-COMPLETE
S/N BET13538-UP
PROVIDES CAST IRON ADAPTOR
PART OF 235-4691 ENGINE AR-COMPLETE
For full view, you need register
Parts for your 980G II WHEEL LOADER:
CATERPILLAR SIS#SEBP34080116
135-4925: PUMP GP-WATER
For full view, you need register
Parts for your 980G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 135-4918 | [1] | HOUSING-WATER PUMP | |
| 2. | 129-9907 | [1] | IMPELLER-PUMP | |
| 3. | 9M-6527 J | [1] | WASHER-HARD (10.2X25.5X5-MM THK) | |
| 4. | 0S-1591 | [1] | BOLT (3/8-16X1.5-IN) | |
| 5. | 1A-1135 | [1] | BOLT (5/8-11X2-IN) | |
| 6. | 128-0317 J | [1] | SEAL GP | |
| 7. | 6I-3643 | [1] | GEAR (74-TEETH) | |
| 8. | 153-1256 J | [1] | SEAL-LIP TYPE | |
| 9. | 135-4928 J | [1] | SHAFT-WATER PUMP | |
| 10. | 5S-0581 J | [1] | WASHER-HARD (17X38X8-MM THK) | |
| 11. | 1B-7182 | [4] | BOLT (5/16-18X1.25-IN) | |
| 12. | 108-7930 J | [1] | BEARING AS-ROLLER | |
| 13. | 136-1107 J | [1] | RETAINER | |
| 14. | 136-3742 J | [1] | FILTER | |
| AVAILABLE REPAIR KIT(S): | ||||
| 377-7037 J | [1] | KIT-WATER PUMP | ||
| 128-2922 | [1] | KIT-GASKET (WATER PUMP) | ||
| (ALSO INCLUDES O-RINGS) | ||||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
#SEBP34080117
352-0212: PUMP GP-WATER
For full view, you need register
Parts for your 980G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 161-5718 | [1] | HOUSING-WATER PUMP | |
| 2. | 129-9907 | [1] | IMPELLER-PUMP | |
| 3. | 9M-6527 | [1] | WASHER-HARD (10.2X25.5X5-MM THK) | |
| 4. | 0S-1591 | [1] | BOLT (3/8-16X1.5-IN) | |
| 5. | 1A-1135 | [1] | BOLT (5/8-11X2-IN) | |
| 6. | 349-2654 | [1] | SEAL-WATER PUMP | |
| 7. | 6I-3643 | [1] | GEAR (74-TEETH) | |
| 8. | 153-1256 | [1] | SEAL-LIP TYPE | |
| 9. | 135-4928 | [1] | SHAFT-WATER PUMP | |
| 10. | 5S-0581 | [1] | WASHER-HARD (17X38X8-MM THK) | |
| 11. | 1B-7182 | [4] | BOLT (5/16-18X1.25-IN) | |
| 12. | 108-7930 | [1] | BEARING AS-ROLLER | |
| 13. | 136-1107 | [1] | RETAINER | |
| 14. | 136-3742 | [1] | FILTER |
#SEBP34080118
171-3035: RADIATOR & FAN GP
For full view, you need register
Parts for your 980G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3R-8530 | [7] | BOSS | |
| 2. | 9K-6784 | [1] | SPACER (0.688X1.5X.63-MM THK) | |
| 3. | 5V-8780 | [1] | KNOB | |
| 4. | 6I-2431 | [6] | SEAL | |
| 5. | 6I-2435 | [6] | SPACER (80X108X25-MM THK) | |
| 6. | 8T-2893 | [2] | LOCK GP-CYLINDER | |
| 7. | 8T-4159 | [1] | BUMPER | |
| 8. | 112-5344 | [1] | LATCH AS-DOOR | |
| 9. | 112-9486 | [5] | RETAINER | |
| 10. | 192-7356 | [1] | ADAPTER | |
| 11. | 8T-4226 | [2] | WASHER-PLATED (10.5X45X3-MM THK) | |
| 12. | 161-8919 Y | [1] | MOTOR GP-PISTON (HYDRAULIC FAN) | |
| 13. | 174-4970 | [1] | CORE AS-AFTERCOOLER | |
| 14. | 175-2808 | [1] | CORE AS-HYDRAULIC OIL COOLER | |
| 15. | 175-4245 | [1] | TANK AS-RADIATOR BOTTOM | |
| 16. | 175-4246 | [1] | SUPPORT AS (RH) | |
| 17. | 175-4247 | [1] | SUPPORT AS (LH) | |
| 9R-2821 M | [2] | BOSS (M10X1.5X15-MM) | ||
| 18. | 175-4248 | [1] | SHROUD | |
| 19. | 175-4249 | [1] | SPIDER AS-FAN (8-BLADE) | |
| 20. | 175-4250 | [1] | GUARD AS | |
| 8T-3490 M | [8] | NUT-WELD (M10X1.5-THD) | ||
| 8T-3597 M | [10] | NUT-WELD (M12X1.75-THD) | ||
| 8T-4219 M | [1] | STUD-WELD (M10X1.5X17.5-MM) | ||
| 21. | 175-4251 | [1] | SUPPORT AS | |
| 8T-3490 M | [18] | NUT-WELD (M10X1.5-THD) | ||
| 8T-3597 M | [6] | NUT-WELD (M12X1.75-THD) | ||
| 22. | 175-4252 | [1] | BRACKET AS | |
| 23. | 205-4169 | [1] | BRACKET AS | |
| 24. | 205-4171 | [1] | BRACKET AS | |
| 25. | 175-4257 | [1] | SUPPORT AS | |
| 8T-3490 M | [13] | NUT-WELD (M10X1.5-THD) | ||
| 26. | 205-4163 | [1] | BAFFLE AS (RH) | |
| 27. | 205-4165 | [1] | BAFFLE AS (LH) | |
| 28. | 175-4260 | [1] | SUPPORT AS | |
| 8T-3490 M | [8] | NUT-WELD (M10X1.5-THD) | ||
| 29. | 175-6430 | [1] | RETAINER AS | |
| 8T-3612 M | [1] | NUT-WELD (M8X1.25-THD) | ||
| 30. | 176-0326 | [2] | HINGE AS | |
| 31. | 205-4167 | [1] | BAFFLE AS | |
| 32. | 176-0329 | [1] | BAFFLE | |
| 33. | 176-5804 | [1] | BRACKET AS | |
| 8T-3490 M | [2] | NUT-WELD (M10X1.5-THD) | ||
| 34. | 177-9009 | [1] | BAFFLE AS (RH) | |
| 6V-4604 | [9] | RIVET-POP | ||
| 6V-9632 M | [2] | NUT-WELD (M6X1-THD) | ||
| 8T-3490 M | [10] | NUT-WELD (M10X1.5-THD) | ||
| 35. | 177-9010 | [1] | BAFFLE AS (LH) | |
| 6V-4604 | [3] | RIVET-POP | ||
| 6V-9632 M | [2] | NUT-WELD (M6X1-THD) | ||
| 8T-3490 M | [10] | NUT-WELD (M10X1.5-THD) | ||
| 36. | 204-5150 | [1] | BAFFLE AS (LH) | |
| 37. | 204-5326 | [1] | BAFFLE AS (RH) | |
| 38. | 184-4830 | [6] | CORE AS-RADIATOR | |
| 39. | 186-4926 | [1] | BAFFLE AS | |
| 6V-4604 | [2] | RIVET-POP | ||
| 9X-2026 | [2] | WASHER (6.5X17X1-MM THK) | ||
| 40. | 189-5594 | [2] | COVER AS | |
| 41. | 5C-2890 M | [4] | NUT (M6X1-THD) | |
| 42. | 5C-7261 M | [1] | NUT (M8X1.25-THD) | |
| 43. | 5C-9553 M | [4] | BOLT (M6X1X16-MM) | |
| 44. | 5P-1076 | [4] | WASHER-HARD (13.5X30X4-MM THK) | |
| 45. | 7X-0515 | [9] | WASHER-HARD (17X35X5-MM THK) | |
| 46. | 7X-2555 M | [7] | BOLT (M16X2X80-MM) | |
| 47. | 7X-2621 M | [2] | BOLT (M10X1.5X12-MM) | |
| 48. | 7X-7729 | [38] | WASHER (11X25X3-MM THK) | |
| 49. | 8T-4121 | [58] | WASHER-HARD (11X21X2.5-MM THK) | |
| 50. | 8T-4132 M | [1] | NUT (M16X2-THD) | |
| 51. | 8T-4133 M | [8] | NUT (M10X1.5-THD) | |
| 52. | 8T-4137 M | [12] | BOLT (M10X1.5X20-MM) | |
| 53. | 8T-4139 M | [8] | BOLT (M12X1.75X30-MM) | |
| 54. | 8T-4140 M | [1] | BOLT (M16X2X60-MM) | |
| 55. | 8T-4183 M | [4] | BOLT (M12X1.75X40-MM) | |
| 56. | 8T-4185 M | [3] | BOLT (M10X1.5X50-MM) | |
| 57. | 8T-4195 M | [59] | BOLT (M10X1.5X30-MM) | |
| 58. | 8T-4196 M | [8] | BOLT (M10X1.5X35-MM) | |
| 59. | 8T-4200 M | [4] | BOLT (M8X1.25X16-MM) | |
| 60. | 8T-4223 | [10] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 61. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 62. | 8T-4956 M | [2] | BOLT (M12X1.75X35-MM) | |
| 63. | 9X-8256 | [8] | WASHER (6.6X12X2-MM THK) | |
| 64. | 6V-9335 BD | SEAL | ||
| 65. | 5P-5643 BD | SEAL | ||
| 66. | 5P-7483 BD | SEAL | ||
| 67. | 160-8742 M | [2] | BOLT (M10X1.5X55-MM) | |
| 68. | 8T-4136 M | [4] | BOLT (M10X1.5X25-MM) | |
| 69. | 121-3307 | [2] | MOUNT AS-RESILIENT | |
| 70. | 5P-5755 BD | SEAL | ||
| B | USE AS REQUIRED | |||
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP34080119
171-3035: RADIATOR & FAN GP
For full view, you need register
Parts for your 980G II WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3R-8530 | [7] | BOSS | |
| 2. | 9K-6784 | [1] | SPACER (0.688X1.5X.63-MM THK) | |
| 3. | 5V-8780 | [1] | KNOB | |
| 4. | 6I-2431 | [6] | SEAL | |
| 5. | 6I-2435 | [6] | SPACER (80X108X25-MM THK) | |
| 6. | 8T-2893 | [2] | LOCK GP-CYLINDER | |
| 7. | 8T-4159 | [1] | BUMPER | |
| 8. | 112-5344 | [1] | LATCH AS-DOOR | |
| 9. | 112-9486 | [5] | RETAINER | |
| 10. | 192-7356 | [1] | ADAPTER | |
| 11. | 8T-4226 | [2] | WASHER-PLATED (10.5X45X3-MM THK) | |
| 12. | 161-8919 Y | [1] | MOTOR GP-PISTON (HYDRAULIC FAN) | |
| 13. | 174-4970 | [1] | CORE AS-AFTERCOOLER | |
| 14. | 212-7786 | [1] | CORE AS-HYDRAULIC OIL COOLER | |
| 15. | 175-4245 | [1] | TANK AS-RADIATOR BOTTOM | |
| 16. | 175-4246 | [1] | SUPPORT AS (RH) | |
| 17. | 175-4247 | [1] | SUPPORT AS (LH) | |
| 9R-2821 M | [2] | BOSS (M10X1.5X15-MM) | ||
| 18. | 175-4248 | [1] | SHROUD | |
| 19. | 175-4249 | [1] | SPIDER AS-FAN (8-BLADE) | |
| 20. | 175-4250 | [1] | GUARD AS | |
| 8T-3490 M | [8] | NUT-WELD (M10X1.5-THD) | ||
| 8T-3597 M | [10] | NUT-WELD (M12X1.75-THD) | ||
| 8T-4219 M | [1] | STUD-WELD (M10X1.5X17.5-MM) | ||
| 21. | 175-4251 | [1] | SUPPORT AS | |
| 8T-3490 M | [18] | NUT-WELD (M10X1.5-THD) | ||
| 8T-3597 M | [6] | NUT-WELD (M12X1.75-THD) | ||
| 22. | 175-4252 | [1] | BRACKET AS | |
| 23. | 205-4169 | [1] | BRACKET AS | |
| 24. | 205-4171 | [1] | BRACKET AS | |
| 25. | 175-4257 | [1] | SUPPORT AS | |
| 8T-3490 M | [13] | NUT-WELD (M10X1.5-THD) | ||
| 26. | 205-4163 | [1] | BAFFLE AS (RH) | |
| 27. | 205-4165 | [1] | BAFFLE AS (LH) | |
| 28. | 175-4260 | [1] | SUPPORT AS | |
| 8T-3490 M | [8] | NUT-WELD (M10X1.5-THD) | ||
| 29. | 175-6430 | [1] | RETAINER AS | |
| 8T-3612 M | [1] | NUT-WELD (M8X1.25-THD) | ||
| 30. | 214-5704 | [2] | HINGE AS | |
| 31. | 205-4167 | [1] | BAFFLE AS | |
| 32. | 176-0329 | [1] | BAFFLE | |
| 33. | 176-5804 | [1] | BRACKET AS | |
| 8T-3490 M | [2] | NUT-WELD (M10X1.5-THD) | ||
| 34. | 177-9009 | [1] | BAFFLE AS (RH) | |
| 6V-4604 | [9] | RIVET-POP | ||
| 6V-9632 M | [2] | NUT-WELD (M6X1-THD) | ||
| 8T-3490 M | [10] | NUT-WELD (M10X1.5-THD) | ||
| 35. | 177-9010 | [1] | BAFFLE AS (LH) | |
| 6V-4604 | [3] | RIVET-POP | ||
| 6V-9632 M | [2] | NUT-WELD (M6X1-THD) | ||
| 8T-3490 M | [10] | NUT-WELD (M10X1.5-THD) | ||
| 36. | 204-5150 | [1] | BAFFLE AS (LH) | |
| 37. | 204-5326 | [1] | BAFFLE AS (RH) | |
| 38. | 6I-2432 C | [6] | CORE AS | |
| 39. | 235-5874 | [1] | BAFFLE | |
| 40. | 189-5594 | [2] | COVER AS | |
| 41. | 5C-2890 M | [4] | NUT (M6X1-THD) | |
| 42. | 5C-7261 M | [1] | NUT (M8X1.25-THD) | |
| 43. | 5C-9553 M | [4] | BOLT (M6X1X16-MM) | |
| 44. | 5P-1076 | [4] | WASHER-HARD (13.5X30X4-MM THK) | |
| 45. | 7X-0515 | [9] | WASHER-HARD (17X35X5-MM THK) | |
| 46. | 7X-2555 M | [7] | BOLT (M16X2X80-MM) | |
| 47. | 212-7261 | [1] | BAFFLE | |
| 48. | 7X-7729 C | [52] | WASHER (11X25X3-MM THK) | |
| 49. | 8T-4121 | [47] | WASHER-HARD (11X21X2.5-MM THK) | |
| 50. | 8T-4132 M | [1] | NUT (M16X2-THD) | |
| 51. | 8T-4133 M | [8] | NUT (M10X1.5-THD) | |
| 52. | 8T-4137 M | [14] | BOLT (M10X1.5X20-MM) | |
| 53. | 8T-4139 M | [8] | BOLT (M12X1.75X30-MM) | |
| 54. | 8T-4140 M | [1] | BOLT (M16X2X60-MM) | |
| 55. | 8T-4183 M | [4] | BOLT (M12X1.75X40-MM) | |
| 56. | 8T-6466 M | [7] | BOLT (M10X1.5X60-MM) | |
| 57. | 8T-4195 CM | [62] | BOLT (M10X1.5X30-MM) | |
| 59. | 8T-4200 M | [4] | BOLT (M8X1.25X16-MM) | |
| 60. | 8T-4223 | [10] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 61. | 8T-4224 | [4] | WASHER-HARD (8.8X16X2-MM THK) | |
| 62. | 8T-4956 M | [2] | BOLT (M12X1.75X35-MM) | |
| 63. | 9X-8256 | [8] | WASHER (6.6X12X2-MM THK) | |
| 64. | 6V-9335 BD | SEAL | ||
| 65. | 5P-5643 BD | SEAL | ||
| 66. | 5P-7483 BD | SEAL | ||
| 68. | 8T-4136 M | [8] | BOLT (M10X1.5X25-MM) | |
| 69. | 121-3307 | [2] | MOUNT AS-RESILIENT | |
| 70. | 8C-5058 BE | SEAL | ||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| D | ORDER BY THE METER | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
Caterpillar Parts SIS Catalog 980G II :
Truck sale:
53,500
54,500
49,500