AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

276-1187 HINGE GP-ROADING FENDER -RH S/N N1A1-1563 PART OF 275-8388 FENDER GP-ROADING 950H WHEEL LOADER


FRAME AND BODY
FENDER GP
HITCH GP
HOOD GP
LADDER GP

WHEEL LOADER 950H WHEEL LOADER N1A
 950H Wheel Loader N1A00001-UP (MACHINE) POWERED BY C7 Engine SEBP3845 950H N1A   (2005)

FRAME AND BODY

FENDER GP
FENDER GP-ROADING
275-8388 FENDER GP-ROADING
FENDER GP-ROADING
275-8388 FENDER GP-ROADING
HINGE GP-ROADING FENDER
276-1187 HINGE GP-ROADING FENDER
HINGE GP-ROADING FENDER
276-1190 HINGE GP-ROADING FENDER
HINGE GP-ROADING FENDER
301-2264 HINGE GP-ROADING FENDER
HINGE GP-ROADING FENDER
301-2266 HINGE GP-ROADING FENDER
 

#SEBP38450660
 

276-1187: HINGE GP-ROADING FENDER

276-1187 HINGE GP-ROADING FENDER -RH
S/N N1A1-1563
PART OF 275-8388 FENDER GP-ROADING
i02424418 SEBP3845
2761187 HINGE GP-ROADING FENDER Parts scheme
  For full view, you need register

Parts for your 950H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-4605 [1] PIN-COTTER  
2. 3B-4629 [1] PIN-COTTER  
3. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
4. 132-1928 [1] PIN AS  
5. 274-7066 [1] ROD AS  
6. 276-1188 [1] CHANNEL AS  
7. 276-2124 [1] HINGE AS (RH)  
8. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
 

#SEBP38450661
 

276-1190: HINGE GP-ROADING FENDER

276-1190 HINGE GP-ROADING FENDER -LH
S/N N1A1-1563
PART OF 275-8388 FENDER GP-ROADING
i02424420 SEBP3845
2761190 HINGE GP-ROADING FENDER Parts scheme
  For full view, you need register

Parts for your 950H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-4605 [1] PIN-COTTER  
2. 3B-4629 [1] PIN-COTTER  
3. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
4. 132-1928 [1] PIN AS  
5. 274-7066 [1] ROD AS  
6. 276-1191 [1] CHANNEL AS  
7. 276-2125 [1] HINGE AS (LH)  
8. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
 

#SEBP38450662
 

301-2264: HINGE GP-ROADING FENDER

301-2264 HINGE GP-ROADING FENDER -LH
S/N N1A1564-UP
PART OF 275-8388 FENDER GP-ROADING
i02867226 SEBP3845
3012264 HINGE GP-ROADING FENDER Parts scheme
  For full view, you need register

Parts for your 950H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-4627 [2] PIN-COTTER  
2. 3B-4629 [1] PIN-COTTER  
3. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
4. 132-1928 [1] PIN AS  
5. 300-5451 [1] ROD AS  
  8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
6. 301-2261 [1] CHANNEL AS (LH)  
7. 316-5863 [1] HINGE AS (LH)  
8. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
 

#SEBP38450663
 

301-2266: HINGE GP-ROADING FENDER

301-2266 HINGE GP-ROADING FENDER -RH
S/N N1A1564-UP
PART OF 275-8388 FENDER GP-ROADING
i02867227 SEBP3845
3012266 HINGE GP-ROADING FENDER Parts scheme
  For full view, you need register

Parts for your 950H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-4627 [2] PIN-COTTER  
2. 3B-4629 [1] PIN-COTTER  
3. 3B-8489 [1] FITTING-GREASE (1/8-27 PTF)  
4. 132-1928 [1] PIN AS  
5. 316-5830 [1] HINGE AS  
6. [1] ROD AS  
  8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
7. 301-2263 [1] CHANNEL AS (RH)  
8. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
 

#SEBP38450664
 

112-6953: HITCH GP-ARTICULATING

112-6953 HITCH GP-ARTICULATING
S/N N1A1-UP
PART OF 237-0234 CHASSIS AR
i00753815 SEBP3845
1126953 HITCH GP-ARTICULATING Parts scheme
  For full view, you need register

Parts for your 950H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1B-3925 [2] CUP-BEARING  
2. 3B-8489 [2] FITTING-GREASE (1/8-27 PTF)  
3. 3F-5950 [2] CONE-BEARING  
4. 3K-2876 [2] SEAL-LIP TYPE  
5. 5K-0983 [2] SEAL-LIP TYPE  
6. 7D-8348 [2] CUP-BEARING  
7. 7D-8349 [2] CONE-BEARING  
8. 7G-8839 [1] SPACER (13.5X57X6-MM THK)  
9. 7V-8632 [1] SPACER  
10. 7V-8633 [1] SPACER  
11. 118-8267 [1] PIN AS  
12. 118-8269 [2] BEARING  
13. 118-8270 [1] CAP  
14. 118-8271 [1] PIN  
15. 118-8272 [1] CAP  
16. 118-8273 [1] CAP  
17. 118-8275 B [1] SHIM PACK (INCLUDES 18-SHIMS)  
18. 118-8276 B [1] SHIM PACK (INCLUDES 20-SHIMS)  
19. 127-6513 [1] CAP  
20. 127-6514 B [1] SHIM PACK (INCLUDES 20-SHIMS)  
21. 134-3079 [1] PLATE  
22. 7X-2550 M [7] BOLT (M12X1.75X110-MM)  
23. 8T-4192 M [1] BOLT (M12X1.75X25-MM)  
24. 8T-4176 M [6] BOLT (M12X1.75X90-MM)  
25. 8T-4183 M [6] BOLT (M12X1.75X40-MM)  
26. 8T-4223 [19] WASHER-HARD (13.5X25.5X3-MM THK)  
27. 106-4175 M [2] BOLT (M20X2.5X60-MM)  
28. 8T-4123 [2] WASHER (22X35X3.5-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP38450665
 

251-1700: HOOD & GUARD GP

251-1700 HOOD & GUARD GP
S/N N1A1-1077
PART OF 237-0234 CHASSIS AR
i02226301 SEBP3845
2511700 HOOD & GUARD GP Parts scheme 2511700 HOOD & GUARD GP Parts scheme
  For full view, you need register

Parts for your 950H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 125-7037 [1] INSERT  
2. 216-4515 Y [1] PIPE GP-EXHAUST  
3. 239-8410 [1] PLATE  
4. 243-1712 [2] BRACKET  
5. 243-1718 [1] GRILL AS-TOP  
6. 243-1722 [1] BRACKET (RH)  
7. 243-1723 [1] BRACKET (LH)  
8. 247-4668 Y [1] DOOR GP-ACCESS (HOOD SIDE, RH)  
9. 247-4670 Y [1] DOOR GP-ACCESS (HOOD SIDE, LH)  
10. 248-0706 [2] ROD AS  
    (EACH INCLUDES)
  6V-5839 [2] WASHER (11X21X2.5-MM THK)  
11. 251-1701 Y [1] PANEL GP-HOOD (TOP)  
12. 251-1705 Y [1] PANEL GP-HOOD (SIDE, RH)  
13. 251-1708 Y [1] PANEL GP-HOOD (SIDE, LH)  
14. 251-1712 [1] TUBE  
15. 251-4755 [1] BRACKET AS (RH)  
16. 251-4756 [1] BRACKET AS (LH)  
17. 251-4760 [1] SUPPORT AS  
18. 271-7220 Y [1] GRILL GP-RADIATOR  
19. 3B-4611 [2] PIN-COTTER  
20. 4M-7470 [6] GROMMET  
21. 5C-2890 M [4] NUT (M6X1-THD)  
22. 7X-7729 [38] WASHER (11X25X3-MM THK)  
23. 8T-4121 [38] WASHER-HARD (11X21X2.5-MM THK)  
24. 8T-4133 M [20] NUT (M10X1.5-THD)  
25. 8T-4138 M [4] BOLT (M6X1X20-MM)  
26. 8T-4196 M [54] BOLT (M10X1.5X35-MM)  
27. 9M-5884 [6] BUMPER  
28. 9X-2044 M [2] SCREW-TRUSS HEAD (M6X1X16-MM)  
29. 9X-8256 [8] WASHER (6.6X12X2-MM THK)  
30. 6V-6604 D SEAL (0.8-M)  
31. 126-8472 E SEAL (7.5-CM EACH)  
32. 5P-7483 D SEAL (0.26-M EACH)  
32A. 5P-7483 D SEAL (1.27-M EACH)  
33. 112-9736 E SEAL (147-CM)  
34. 120-5281 E SEAL (88-CM EACH)  
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP38450666
 

292-6000: HOOD & GUARD GP

292-6000 HOOD & GUARD GP
S/N N1A1078-UP
PART OF 237-0234 CHASSIS AR
i02703127 SEBP3845
2926000 HOOD & GUARD GP Parts scheme 2926000 HOOD & GUARD GP Parts scheme 2926000 HOOD & GUARD GP Parts scheme
  For full view, you need register

Parts for your 950H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 125-7037 [1] INSERT  
2. 216-4515 Y [1] PIPE GP-EXHAUST  
3. 239-8410 [1] PLATE  
4. 243-1712 [2] BRACKET  
5. 243-1722 [1] BRACKET (RH)  
6. 243-1723 [1] BRACKET (LH)  
7. 248-0706 [2] ROD AS  
8. 251-1701 Y [1] PANEL GP-HOOD (TOP)  
9. 251-1705 Y [1] PANEL GP-HOOD (SIDE, RH)  
10. 251-1708 Y [1] PANEL GP-HOOD (SIDE, LH)  
11. 251-1712 [1] TUBE  
12. 251-4755 [1] BRACKET AS (RH)  
13. 251-4756 [1] BRACKET AS (LH)  
14. 351-9911 Y [1] SUPPORT GP-HOOD  
15. 287-7893 [1] ANGLE  
16. 292-5999 [1] GRILL AS-TOP (HOOD)  
17. 292-6001 Y [1] DOOR GP-ACCESS (HOOD, LH)  
18. 292-6002 Y [1] DOOR GP-ACCESS (HOOD, RH)  
19. 3B-4611 [2] PIN-COTTER  
20. 4M-7470 [6] GROMMET  
21. 5C-2890 M [4] NUT (M6X1-THD)  
22. 7X-7729 [38] WASHER (11X25X3-MM THK)  
23. 8T-4121 [38] WASHER-HARD (11X21X2.5-MM THK)  
24. 8T-4133 M [24] NUT (M10X1.5-THD)  
25. 8T-4138 M [4] BOLT (M6X1X20-MM)  
26. 8T-4196 M [54] BOLT (M10X1.5X35-MM)  
27. 9M-5884 [6] BUMPER  
28. 9X-2044 M [2] SCREW-TRUSS HEAD (M6X1X16-MM)  
29. 9X-8256 [4] WASHER (6.6X12X2-MM THK)  
30. 308-9131 H SEAL (960-MM)  
31. 126-8472 E SEAL (7.5-CM EACH)  
32. 5P-8245 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
33. 300-7318 E SEAL (147-CM)  
34. 120-5281 E SEAL (88-CM EACH)  
35. 184-7773 [1] SPACER (11.125X19.05X9.14-MM THK)  
36. 5P-4115 [4] WASHER-HARD (7.2X19X2-MM THK)  
  E   ORDER BY THE CENTIMETER
  H   ORDER BY THE MILLIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP38450667
 

291-3707: LADDER AR

291-3707 LADDER AR
S/N N1A1-UP
Type 1
i02696299 SEBP3845
2913707 LADDER AR Parts scheme 2913707 LADDER AR Parts scheme 2913707 LADDER AR Parts scheme
  For full view, you need register

Parts for your 950H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3J-1907 H [1] SEAL-O-RING  
2. 3V-4791 H [1] GROMMET  
3. 4J-5477 H [2] SEAL-O-RING  
4. 5C-9553 HM [4] BOLT (M6X1X16-MM)  
5. 5L-4035 H [2] RING-RETAINING (EXTERNAL)  
6. 6D-3479 H [3] CLIP (LOOP)  
7. 6V-7687 HM [1] LOCKNUT (M12X1.75-THD)  
8. 150-4050 H [1] ELBOW AS  
  8T-0788 H ELBOW  
  3J-1907 H [1] SEAL-O-RING  
9. 143-8325 H [1] GUARD-SENSOR  
10. 148-8434 H [1] TEE AS  
  6V-9843 H [1] TEE  
  6V-8397 H [2] SEAL-O-RING  
11. 7K-1181 H [1] STRAP-CABLE  
12. 7W-8106 H [8] SPACER (11.13X19.05X15-MM THK)  
13. 7X-7729 H [2] WASHER (11X25X3-MM THK)  
14. 8T-4185 M [1] BOLT (M10X1.5X50-MM)  
15. 8T-4121 H [26] WASHER-HARD (11X21X2.5-MM THK)  
16. 8T-4133 HM [6] NUT (M10X1.5-THD)  
17. 8T-4136 HM [1] BOLT (M10X1.5X25-MM)  
18. 8T-4137 HM [5] BOLT (M10X1.5X20-MM)  
19. 8T-4171 HM [2] BOLT (M6X1X12-MM)  
20. 8T-4186 HM [6] BOLT (M10X1.5X40-MM)  
21. 8T-4191 HM [1] BOLT (M10X1.5X16-MM)  
22. 8T-4195 HM [4] BOLT (M10X1.5X30-MM)  
23. 8T-4196 HM [4] BOLT (M10X1.5X35-MM)  
24. 8T-4223 H [5] WASHER-HARD (13.5X25.5X3-MM THK)  
25. 8T-4956 HM [4] BOLT (M12X1.75X35-MM)  
26. 9X-6165 H [4] WASHER (6.5X22X2.5-MM THK)  
27. 9X-8256 H [2] WASHER (6.6X12X2-MM THK)  
28. 095-0917 H [1] RING-RETAINING  
29. 149-2847 H [1] FITTING  
30. 153-6223 H [1] PLUG-DUST  
31. 149-2848 H [1] COUPLING AS  
32. 160-8708 H [1] BRACKET AS  
33. 234-1530 H [1] STEP AS  
  8T-3490 HM [4] NUT-WELD (M10X1.5-THD)  
34. 234-3545 H [4] PLATE  
35. 244-1542 H [1] PLUG-ORIFICE  
36. 254-4151 H [2] ROLLER  
37. 254-4152 H [1] CYLINDER  
38. 303-2112 H [1] SPRING-GAS  
39. 254-4154 H [2] PLATE  
40. 254-4156 H [2] SUPPORT-STEP (RUBBER)  
41. 254-4171 H [1] PIN  
42. 254-4187 H [2] PIN  
43. 254-4189 H [1] BLOCK  
44. 173-8073 H [1] SPACER (11X25X20-MM THK)  
45. 254-5254 H [2] HOUSING  
46. 254-5255 H [2] BEARING  
47. 254-5257 H [1] ELBOW  
48. 254-8698 H [1] COVER AS  
  6V-9632 HM [4] NUT-WELD (M6X1-THD)  
49. 259-4506 H [1] FILM-WARNING (CRUSH HAZARD)  
50. 306-2277 H [1] LADDER AS  
51. 267-1780 H [1] PLATE  
52. 267-1781 H [1] PLATE  
53. 278-9579 H [1] FENDER AS (LH)  
  4V-7785 H [1] HINGE  
54. 306-2271 H [1] ARM AS  
55. 278-9594 H [1] BRACKET AS  
  H [1] PLATE  
56. 310-4761 HI [1] HOSE AS  
57. 303-1458 H [1] HOOK  
58. 306-6325 H [1] PLATE  
59. 5P-4116 H [2] WASHER-HARD (8.8X20.5X2-MM THK)  
60. 8T-4200 HM [2] BOLT (M8X1.25X16-MM)  
61. 3E-6602 BEJ SEAL (102-CM)  
62. 5P-1076 J [10] WASHER-HARD (13.5X30X4-MM THK)  
63. 8T-4121 J [3] WASHER-HARD (11X21X2.5-MM THK)  
64. 8T-4139 JM [6] BOLT (M12X1.75X30-MM)  
65. 8T-4191 JM [3] BOLT (M10X1.5X16-MM)  
66. 8T-4192 JM [4] BOLT (M12X1.75X25-MM)  
67. 294-2382 J [1] LATCH AS  
68. 305-3159 J [1] PAWL  
69. 272-2785 J [1] SHEET  
70. 278-9582 J [1] BOX AS-TOOL  
  272-2783 J [1] HINGE AS  
71. 278-9587 J [2] BRACKET AS  
  J [1] PLATE  
72. 302-6795 H [1] COVER  
73. 306-1643 H [1] STEP AS  
74. 254-4190 H [1] PLATE  
   
    *****STANDARD REMOVAL*****
   
  243-5856 AFL [1] FENDER AS-REAR (LH)  
  234-5107 AFN [2] SUPPORT-STEP (RUBBER)  
  234-5110 AFN [2] PLATE  
  246-7934 AFN [1] LADDER AS (LH)  
  5P-1076 AFN [4] WASHER-HARD (13.5X30X4-MM THK)  
  8T-4121 AFN [16] WASHER-HARD (11X21X2.5-MM THK)  
  8T-4183 AFNM [4] BOLT (M12X1.75X40-MM)  
  8T-4136 AFOM [1] BOLT (M10X1.5X25-MM)  
  148-8367 AFO [1] ELBOW AS  
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  F   NOT SHOWN
  H   PART OF LADDER GP
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  J   PART OF TOOL BOX GP
  L   PART OF STANDARD FENDER GP-WHEEL LOADER
  M   METRIC PART
  N   PART OF STANDARD LADDER GP
  O   PART OF CONTROL GP-BRAKE
 

#SEBP38450668
 

291-3707: LADDER AR

291-3707 LADDER AR
S/N N1A1-UP
Type 2
i05329678 SEBP3845
2913707 LADDER AR Parts scheme 2913707 LADDER AR Parts scheme 2913707 LADDER AR Parts scheme
  For full view, you need register

Parts for your 950H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3J-1907 H [1] SEAL-O-RING  
2. 3V-4791 H [1] GROMMET  
3. 4J-5477 H [2] SEAL-O-RING  
4. 5C-9553 HM [4] BOLT (M6X1X16-MM)  
5. 5L-4035 H [2] RING-RETAINING (EXTERNAL)  
6. 6D-3479 H [3] CLIP (LOOP)  
7. 7X-2620 CHM [1] BOLT (M8X1.25X10-MM)  
8. 150-4050 H [1] ELBOW AS  
  8T-0788 H [1] ELBOW  
9. 143-7685 H [1] ADAPTER-SPECIAL  
10. 148-8434 H [1] TEE AS  
  6V-8397 H [2] SEAL-O-RING  
  6V-9843 H [1] TEE  
11. 7K-1181 H [1] STRAP-CABLE  
12. 7W-8106 H [8] SPACER (11.13X19.05X15-MM THK)  
13. 7X-7729 CH [5] WASHER (11X25X3-MM THK)  
14. 8T-4185 HM [1] BOLT (M10X1.5X50-MM)  
15. 8T-4121 H [22] WASHER-HARD (11X21X2.5-MM THK)  
16. 8T-4133 HM [6] NUT (M10X1.5-THD)  
17. 8T-4136 HM [1] BOLT (M10X1.5X25-MM)  
18. 8T-4137 CHM [4] BOLT (M10X1.5X20-MM)  
19. 8T-4171 HM [2] BOLT (M6X1X12-MM)  
20. 8T-4186 CHM [4] BOLT (M10X1.5X40-MM)  
21. 8T-5005 CHM [2] BOLT (M10X1.5X70-MM)  
22. 8T-4195 HM [4] BOLT (M10X1.5X30-MM)  
23. 8T-4196 HM [4] BOLT (M10X1.5X35-MM)  
24. 8T-4223 CH [4] WASHER-HARD (13.5X25.5X3-MM THK)  
25. 8T-4956 HM [4] BOLT (M12X1.75X35-MM)  
26. 9X-6165 H [4] WASHER (6.5X22X2.5-MM THK)  
27. 9X-8256 H [2] WASHER (6.6X12X2-MM THK)  
28. 095-0917 H [1] RING-RETAINING  
29. 149-2847 H [1] FITTING  
30. 153-6223 H [1] PLUG-DUST  
31. 149-2848 H [1] COUPLING AS  
32. 160-8708 H [1] BRACKET AS  
  8T-3490 HM [1] NUT-WELD (M10X1.5-THD)  
33. 234-1530 H [1] STEP AS  
  8T-3490 HM [4] NUT-WELD (M10X1.5-THD)  
34. 234-3545 H [4] PLATE  
35. 244-1542 H [1] PLUG-ORIFICE  
36. 254-4151 H [2] ROLLER  
37. 254-4152 H [1] CYLINDER  
38. 303-2112 H [1] SPRING-GAS  
39. 254-4154 H [2] PLATE  
40. 254-4156 H [2] SUPPORT-STEP (RUBBER)  
41. 254-4171 H [1] PIN  
42. 254-4187 H [2] PIN  
43. 254-4189 H [1] BLOCK  
44. 173-8073 H [1] SPACER (11X25X20-MM THK)  
45. 315-2038 CH [2] BLOCK  
46. 316-0393 CH [2] BEARING  
47. 254-5257 H [1] ELBOW  
48. 254-8698 H [1] COVER AS  
  6V-9632 HM [4] NUT-WELD (M6X1-THD)  
49. 259-4506 H [1] FILM-WARNING (CRUSH HAZARD)  
50. 321-1240 CH [1] LADDER AS  
51. 267-1780 H [1] PLATE  
52. 267-1781 H [1] PLATE  
53. 278-9579 H [1] FENDER AS (LH)  
  8T-3490 HM [15] NUT-WELD (M10X1.5-THD)  
  8T-3597 HM [9] NUT-WELD (M12X1.75-THD)  
54. 320-9093 CH [1] ARM AS (LADDER)  
55. 278-9594 H [1] BRACKET AS  
56. 310-4761 HI [1] HOSE AS  
57. 315-2037 CH [1] HOOK  
58. 315-2036 CH [1] CABLE AS  
59. 5P-4116 H [2] WASHER-HARD (8.8X20.5X2-MM THK)  
60. 8T-4200 HM [2] BOLT (M8X1.25X16-MM)  
61. 3E-6602 EJ SEAL (102-CM)  
62. 5P-1076 J [10] WASHER-HARD (13.5X30X4-MM THK)  
63. 8T-4121 CJ [2] WASHER-HARD (11X21X2.5-MM THK)  
64. 8T-4139 JM [6] BOLT (M12X1.75X30-MM)  
65. 8T-4137 CJM [2] BOLT (M10X1.5X20-MM)  
66. 8T-4192 JM [4] BOLT (M12X1.75X25-MM)  
67. 326-0610 CJX [1] LATCH AS  
  1H-3244 [4] LOCKWASHER  
  095-1207 M [2] NUT (M12X1.75-THD)  
  326-0612 [2] WASHER-TAB  
  344-5673 M [4] NUT (M6X1-THD)  
68. 305-3159 J [1] PAWL  
69. 272-2785 J [1] SHEET  
70. 278-9582 J [1] BOX AS-TOOL  
  8T-3597 JM [4] NUT-WELD (M12X1.75-THD)  
  272-2783 J [1] HINGE AS  
71. 278-9587 J [2] BRACKET AS  
72. 302-6795 H [1] COVER  
73. 306-1643 H [1] STEP AS  
74. 3B-8489 CH [2] FITTING-GREASE (1/8-27 PTF)  
75. 254-4190 H [1] PLATE  
   
    *****STANDARD REMOVAL*****
  243-5856 AFL [1] FENDER AS-REAR (LH)  
  234-5107 AFN [2] SUPPORT-STEP (RUBBER)  
  234-5110 AFN [2] PLATE  
  246-7934 AFN [1] LADDER AS (LH)  
  5P-1076 AFN [4] WASHER-HARD (13.5X30X4-MM THK)  
  8T-4121 AFN [16] WASHER-HARD (11X21X2.5-MM THK)  
  8T-4183 AFNM [4] BOLT (M12X1.75X40-MM)  
  8T-4136 AFOM [1] BOLT (M10X1.5X25-MM)  
  148-8367 AFO [1] ELBOW AS  
  A   NOT PART OF THIS GROUP
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  F   NOT SHOWN
  H   PART OF LADDER GP
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  J   PART OF TOOL BOX GP
  L   PART OF STANDARD FENDER GP-WHEEL LOADER
  M   METRIC PART
  N   PART OF STANDARD LADDER GP
  O   PART OF CONTROL GP-BRAKE
  X   REQUIRES CORPORATE KEY
 

#SEBP38450669
 

237-0430: LADDER GP

237-0430 LADDER GP
S/N N1A1-1352
PART OF 237-0234 CHASSIS AR
i02226859 SEBP3845
2370430 LADDER GP Parts scheme
  For full view, you need register

Parts for your 950H WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7W-8106 [32] SPACER (11.13X19.05X15-MM THK)  
2. 234-1530 [4] STEP AS  
3. 234-3545 [16] PLATE  
4. 234-5107 [8] SUPPORT-STEP (RUBBER)  
5. 234-5110 [2] PLATE  
6. 245-3834 [1] HANDRAIL AS (LH)  
7. 245-3835 [1] HANDRAIL AS (RH)  
8. 245-3852 [1] HANDRAIL AS (LH)  
9. 245-3853 [1] HANDRAIL AS (RH)  
10. 246-6727 [4] BRACKET AS  
11. 246-7934 [1] LADDER AS (LH)  
  234-1530 [1] STEP AS  
  8T-3490 M [4] NUT-WELD (M10X1.5-THD)  
12. 246-7935 [1] LADDER AS (RH)  
  8T-3490 M [4] NUT-WELD (M10X1.5-THD)  
13. 246-7936 [1] BRACKET AS  
14. 5P-1076 [8] WASHER-HARD (13.5X30X4-MM THK)  
15. 8T-4121 [56] WASHER-HARD (11X21X2.5-MM THK)  
16. 8T-4133 M [4] NUT (M10X1.5-THD)  
17. 8T-4183 M [8] BOLT (M12X1.75X40-MM)  
18. 8T-4186 M [32] BOLT (M10X1.5X40-MM)  
19. 8T-4195 M [20] BOLT (M10X1.5X30-MM)  
20. 8T-4223 [12] WASHER-HARD (13.5X25.5X3-MM THK)  
21. 8T-4139 M [12] BOLT (M12X1.75X30-MM)  
  M   METRIC PART
 

Information:

Caterpillar Parts SIS Catalog 950H :

HARDWARE GP-REAR FRAME
341-9522 HARDWARE GP-REAR FRAME
HARDWARE GP-REAR FRAME
280-2812 HARDWARE GP-REAR FRAME
HARDWARE GP-REAR FRAME
276-2128 HARDWARE GP-REAR FRAME
HARDWARE GP-REAR FRAME
260-1533 HARDWARE GP-REAR FRAME
HARDWARE GP-REAR FRAME
260-1533 HARDWARE GP-REAR FRAME
HARDWARE GP-REAR FRAME
260-1531 HARDWARE GP-REAR FRAME
HARDWARE GP-REAR FRAME
260-1531 HARDWARE GP-REAR FRAME
HARDWARE GP-REAR FRAME
260-1530 HARDWARE GP-REAR FRAME
HINGE GP-ROADING FENDER
276-1190 HINGE GP-ROADING FENDER
HINGE GP-ROADING FENDER
301-2264 HINGE GP-ROADING FENDER
HINGE GP-ROADING FENDER
301-2266 HINGE GP-ROADING FENDER
HITCH GP-ARTICULATING
112-6953 HITCH GP-ARTICULATING
HOOD & GUARD GP
251-1700 HOOD & GUARD GP
HOOD & GUARD GP
292-6000 HOOD & GUARD GP
LADDER AR
291-3707 LADDER AR
LADDER AR
291-3707 LADDER AR

Truck sale:

Caterpillar 950H
 
Caterpillar 950H
- Wheel Loaders
BERGERAT MONNOYEUR S.A.S.
Caterpillar 950H, Wheel Loaders, Construction
70,000 
Caterpillar 950H, Wheel Loaders, Construction
- Wheel Loaders
GREGORY POOLE EQUIPMENT CO.
 
50,000 
Caterpillar 950H, Wheel Loaders, Construction
- Wheel Loaders
FINNING CHILE S.A.
Caterpillar 950H, Wheel Loaders, Construction
99,500 
Caterpillar 950H, Wheel Loaders, Construction
- Wheel Loaders
HOLT CAT
 
60,000 
Caterpillar 950H, Wheel Loaders, Construction
- Wheel Loaders
FINNING CHILE S.A.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.