AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

323-6101 JAW GP-PULVERIZER S/N JMX1-UP PART OF 328-4016 JAW GP-PULVERIZER FOR USE WITH MP-20 MULTI-PROCESSOR MP15


WORK TOOLS
JAW GP

MULTI PROCESSOR JAW MP15 MULTI PROCESSOR JAW JMW
 MP15, MP20, MP30 & MP40 Multi-Processor Jaws JMW00001-UP (MACHINE) SEBP5452 MP15 JMW   (2010)

WORK TOOLS

JAW GP
JAW GP-PULVERIZER
323-6088 JAW GP-PULVERIZER
JAW GP-PULVERIZER
323-6097 JAW GP-PULVERIZER
JAW GP-PULVERIZER
323-6101 JAW GP-PULVERIZER
JAW GP-PULVERIZER
325-0740 JAW GP-PULVERIZER
JAW GP-PULVERIZER
325-0741 JAW GP-PULVERIZER
JAW GP-PULVERIZER
325-0811 JAW GP-PULVERIZER
 

#SEBP54520020
 

323-6101: JAW GP-PULVERIZER

323-6101 JAW GP-PULVERIZER
S/N JMX1-UP
PART OF 328-4016 JAW GP-PULVERIZER
FOR USE WITH MP-20 MULTI-PROCESSOR
i03593800 SEBP5452
3236101 JAW GP-PULVERIZER Parts scheme
  For full view, you need register

Parts for your MP15 MULTI PROCESSOR JAW:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 169-0385 [2] EDGE-CUTTING  
2. 169-0386 B [4] SHIM (1-MM THK)  
3. 169-0388 B [2] SHIM (1.5-MM THK)  
4. 169-4641 [2] BUSHING  
5. 391-3716 [1] TOOTH AS-RIPPER  
6. 169-7109 [1] PIN  
7. 169-7112 B [2] SHIM (2.5-MM THK)  
8. 169-7113 B [2] SHIM (3-MM THK)  
9. 169-7114 B [2] SHIM (3.5-MM THK)  
10. 170-3008 [1] SPACER (143X159X47-MM THK)  
11. 280-9200 [2] TOOTH  
12. 323-6104 [1] JAW AS (LOWER)  
13. 323-6106 [1] JAW AS (UPPER)  
14. 159-1122 [2] LOCKWASHER  
15. 169-6065 M [6] SCREW-FLAT HEAD  
16. 174-6481 M [1] BOLT-SOCKET HEAD (M30X3.5X120-MM)  
17. 7X-2575 M [2] BOLT (M24X3X60-MM)  
18. 8T-0363 M [2] BOLT (M24X3X120-MM)  
19. 8T-3957 M [6] BOLT-SOCKET HEAD (M12X1.75X30-MM)  
20. 8T-4001 M [4] NUT (M24X3-THD)  
21. 8T-4123 [6] WASHER (3.62X5.75X0.375-MM THK)  
22. 8T-4131 M [6] NUT (M20X2.5-THD)  
23. 8C-8722 M [1] NUT (M30X3.5-THD)  
   
    AVAILABLE SERVICE REPAIR PARTS
24. 347-2492 J [1] TOOTH (RH)  
25. 347-2490 L [1] TOOTH AS  
26. 347-2491 J [1] TOOTH (LH)  
  B   USE AS REQUIRED
  J   FOR LOWER JAW AS
  L   FOR UPPER JAW AS
  M   METRIC PART
 

#SEBP54520021
 

325-0740: JAW GP-PULVERIZER

325-0740 JAW GP-PULVERIZER
S/N JMY1-UP
PART OF 329-3579 JAW GP-PULVERIZER
i03596462 SEBP5452
3250740 JAW GP-PULVERIZER Parts scheme
  For full view, you need register

Parts for your MP15 MULTI PROCESSOR JAW:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 169-0385 [2] EDGE-CUTTING  
2. 169-0386 B [6] SHIM (1-MM THK)  
3. 169-0388 B [2] SHIM (1.5-MM THK)  
4. 391-3716 [1] TOOTH AS-RIPPER  
5. 172-3722 [1] PIN  
6. 172-3723 [2] BUSHING  
7. 172-3725 B [2] SHIM (2.5-MM THK)  
8. 172-3726 B [2] SHIM (3-MM THK)  
9. 172-3727 B [2] SHIM (3.5-MM THK)  
10. 172-5914 [1] SPACER (179X192X49-MM THK)  
11. 280-9200 [4] TOOTH  
12. 325-0731 [1] JAW AS (LOWER)  
13. 325-0736 [1] JAW AS (UPPER)  
14. 159-1122 [4] LOCKWASHER  
15. 174-6481 M [1] BOLT-SOCKET HEAD (M30X3.5X120-MM)  
16. 170-3524 M [6] SCREW-FLAT HEAD  
17. 6V-8200 M [6] BOLT-SOCKET HEAD (M12X1.75X35-MM)  
18. 7X-2575 M [2] BOLT (M24X3X60-MM)  
19. 8T-0363 M [4] BOLT (M24X3X120-MM)  
20. 8T-4001 M [6] NUT (M24X3-THD)  
21. 8T-4123 [6] WASHER (3.62X5.75X0.375-MM THK)  
22. 8T-4131 M [6] NUT (M20X2.5-THD)  
23. 8C-8722 M [1] NUT (M30X3.5-THD)  
   
    AVAILABLE SERVICE REPAIR PARTS
24. 347-2508 J [1] TOOTH AS (RH)  
25. 347-2506 L [1] TOOTH AS  
26. 347-2507 J [1] TOOTH AS (LH)  
  B   USE AS REQUIRED
  J   FOR LOWER JAW AS
  L   FOR UPPER JAW AS
  M   METRIC PART
 

#SEBP54520022
 

325-0741: JAW GP-PULVERIZER

325-0741 JAW GP-PULVERIZER
S/N JMY1-UP
PART OF 329-3577 JAW GP-PULVERIZER
i03596374 SEBP5452
3250741 JAW GP-PULVERIZER Parts scheme
  For full view, you need register

Parts for your MP15 MULTI PROCESSOR JAW:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 391-3716 [1] TOOTH AS-RIPPER  
2. 172-3722 [1] PIN  
3. 172-3723 [2] BUSHING  
4. 172-3725 B [2] SHIM (2.5-MM THK)  
5. 172-3726 B [2] SHIM (3-MM THK)  
6. 172-3727 B [2] SHIM (3.5-MM THK)  
7. 172-5901 [1] SPACER (180X192X62-MM THK)  
8. 172-5931 [2] EDGE-CUTTING  
9. 172-5932 B [2] SHIM (1.5-MM THK)  
10. 172-5933 B [6] SHIM (1-MM THK)  
11. 280-9200 [11] TOOTH  
12. 325-0732 [1] JAW AS (LOWER)  
12A. 317-3705 [2] PLATE-WEAR  
12B. 317-3706 [1] PLATE-WEAR  
13. 325-0737 [1] JAW AS (UPPER)  
13A. 192-5239 [1] HOLDER (SERIAL NUMBER PLATE)  
  347-2504 F [1] HOLDER-TOOTH  
14. 145-4075 M [3] BOLT (M20X2.5X75-MM)  
15. 159-1122 [11] LOCKWASHER  
16. 174-6481 M [1] BOLT-SOCKET HEAD (M30X3.5X120-MM)  
17. 170-3524 M [3] SCREW-FLAT HEAD  
18. 6V-8200 M [6] BOLT-SOCKET HEAD (M12X1.75X35-MM)  
19. 7X-2575 M [2] BOLT (M24X3X60-MM)  
20. 8T-0363 M [11] BOLT (M24X3X120-MM)  
21. 8T-4001 M [13] NUT (M24X3-THD)  
22. 8T-4123 [6] WASHER (3.62X5.75X0.375-MM THK)  
23. 8T-4131 M [6] NUT (M20X2.5-THD)  
24. 8C-8722 M [1] NUT (M30X3.5-THD)  
   
    AVAILABLE SERVICE REPAIR PARTS
25. 347-2504 L [1] HOLDER-TOOTH  
26. 347-2505 J [1] HOLDER-TOOTH  
  B   USE AS REQUIRED
  F   NOT SHOWN
  J   FOR LOWER JAW AS
  L   FOR UPPER JAW AS
  M   METRIC PART
 

#SEBP54520023
 

325-0811: JAW GP-PULVERIZER

325-0811 JAW GP-PULVERIZER
S/N JMZ1-UP
PART OF 329-3581 JAW GP-PULVERIZER
Type 1
i03598201 SEBP5452
3250811 JAW GP-PULVERIZER Parts scheme
  For full view, you need register

Parts for your MP15 MULTI PROCESSOR JAW:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 313-1306 [4] TOOTH  
2. 172-5931 [2] EDGE-CUTTING  
3. 172-5932 B [4] SHIM (1.5-MM THK)  
4. 172-5933 B [12] SHIM (1-MM THK)  
5. 173-1681 [1] PIN  
6. 173-1682 [2] BUSHING  
7. 173-1685 [1] SPACER (209X224X89-MM THK)  
8. 173-1686 B [2] SHIM (4.5-MM THK)  
9. 173-1687 B [2] SHIM (5-MM THK)  
10. 173-1688 B [2] SHIM (5.5-MM THK)  
11. 173-1692 [1] TOOTH AS-RIPPER  
12. 325-0800 [1] JAW AS (LOWER)  
13. 325-0804 [1] JAW AS (UPPER)  
14. 144-2715 M [3] SCREW-FLAT HEAD (M20X2.5X100-MM)  
15. 169-3177 [4] LOCKWASHER  
16. 170-3524 M [3] SCREW-FLAT HEAD  
17. 174-6481 M [2] BOLT-SOCKET HEAD (M30X3.5X120-MM)  
18. 7X-2575 M [2] BOLT (M24X3X60-MM)  
19. 7X-2584 M [4] BOLT (M30X3.5X140-MM)  
20. 8C-8722 M [4] NUT (M30X3.5-THD)  
21. 8T-4001 M [2] NUT (M24X3-THD)  
22. 8T-4123 [6] WASHER (3.62X5.75X0.375-MM THK)  
23. 8T-4131 M [6] NUT (M20X2.5-THD)  
24. 8T-4944 M [6] BOLT-SOCKET HEAD (M16X2X40-MM)  
   
    AVAILABLE SERVICE REPAIR PARTS
25. 347-2513 J [4] TOOTH AS  
26. 347-2512 L [1] TOOTH AS  
  B   USE AS REQUIRED
  J   FOR LOWER JAW AS
  L   FOR UPPER JAW AS
  M   METRIC PART
 

#SEBP54520024
 

325-0811: JAW GP-PULVERIZER

325-0811 JAW GP-PULVERIZER
S/N JMZ1-UP
PART OF 329-3581 JAW GP-PULVERIZER
Type 2
i06882930 SEBP5452
3250811 JAW GP-PULVERIZER Parts scheme
  For full view, you need register

Parts for your MP15 MULTI PROCESSOR JAW:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 313-1306 [4] TOOTH  
2. 172-5931 [2] EDGE-CUTTING  
3. 172-5932 B [4] SHIM (1.5-MM THK)  
4. 172-5933 B [12] SHIM (1-MM THK)  
5. 173-1681 [1] PIN  
6. 173-1682 [2] BUSHING  
7. 173-1685 [1] SPACER (209X224X89-MM THK)  
8. 173-1686 B [2] SHIM (4.5-MM THK)  
9. 173-1687 B [2] SHIM (5-MM THK)  
10. 173-1688 B [2] SHIM (5.5-MM THK)  
11. 473-8873 C [1] TOOTH (RIPPER)  
12. 325-0800 [1] JAW AS (LOWER)  
12A. 347-2513 [4] TOOTH AS  
13. 325-0804 [1] JAW AS (UPPER)  
13A. 347-2512 [1] TOOTH AS  
14. 144-2715 M [3] SCREW-FLAT HEAD (M20X2.5X100-MM)  
15. 169-3177 [4] LOCKWASHER  
16. 170-3524 M [3] SCREW-FLAT HEAD  
17. 107-3953 CM [2] BOLT (M30X3.5X150-MM)  
18. 7X-2575 M [2] BOLT (M24X3X60-MM)  
19. 7X-2584 M [4] BOLT (M30X3.5X140-MM)  
20. 8C-8722 CM [6] NUT (M30X3.5-THD)  
21. 8T-4001 M [2] NUT (M24X3-THD)  
22. 8T-4123 [6] WASHER (3.62X5.75X0.375-MM THK)  
23. 8T-4131 M [6] NUT (M20X2.5-THD)  
24. 8T-4944 M [6] BOLT-SOCKET HEAD (M16X2X40-MM)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
 

#SEBP54520025
 

328-3996: JAW GP-PULVERIZER

328-3996 JAW GP-PULVERIZER -PRIMARY
S/N JMW1-UP
FOR USE WITH MP15 MULTI-PROCESSOR
i03593013 SEBP5452
  For full view, you need register

Parts for your MP15 MULTI PROCESSOR JAW:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  323-6085 Y [1] JAW GP-PULVERIZER  
  Y [1] PLATE & FILM GP  
   
  169-0382 [1] KIT-MAINTENANCE  
  169-0386 J [2] SHIM (1-MM THK)  
  169-0388 J [2] SHIM (1.5-MM THK)  
  202-6344 [1] BOX AS-STORAGE  
  136-0155 M [2] SETSCREW (M4X0.7X8-MM)  
  J   THESE PARTS MUST BE PACKED INTO THE BOX AS-STORAGE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP54520026
 

328-3999: JAW GP-PULVERIZER

328-3999 JAW GP-PULVERIZER -SECONDARY
S/N JMW1-UP
FOR USE WITH MP15 MULTI-PROCESSOR
i03593369 SEBP5452
  For full view, you need register

Parts for your MP15 MULTI PROCESSOR JAW:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  323-6088 Y [1] JAW GP-PULVERIZER  
  Y [1] PLATE & FILM GP  
   
  169-0382 [1] KIT-MAINTENANCE  
  169-0386 J [2] SHIM (1-MM THK)  
  169-0388 J [2] SHIM (1.5-MM THK)  
  202-6344 [1] BOX AS-STORAGE  
  136-0155 M [2] SETSCREW (M4X0.7X8-MM)  
  J   THESE PARTS MUST BE PACKED INTO THE BOX AS-STORAGE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP54520027
 

328-4014: JAW GP-PULVERIZER

328-4014 JAW GP-PULVERIZER -PRIMARY
S/N JMX1-UP
FOR USE WITH MP20 MULTI-PROCESSOR
i03593760 SEBP5452
  For full view, you need register

Parts for your MP15 MULTI PROCESSOR JAW:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  323-6097 Y [1] JAW GP-PULVERIZER  
  Y [1] PLATE & FILM GP  
   
  169-0382 [1] KIT-MAINTENANCE  
  169-0386 J [2] SHIM (1-MM THK)  
  169-0388 J [2] SHIM (1.5-MM THK)  
  202-6344 [1] BOX AS-STORAGE  
  136-0155 M [2] SETSCREW (M4X0.7X8-MM)  
  J   THESE PARTS MUST BE PACKED INTO THE BOX AS-STORAGE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP54520028
 

328-4016: JAW GP-PULVERIZER

328-4016 JAW GP-PULVERIZER -SECONDARY
S/N JMX1-UP
FOR USE WITH MP20 MULTI-PROCESSOR
i03593761 SEBP5452
  For full view, you need register

Parts for your MP15 MULTI PROCESSOR JAW:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  323-6101 Y [1] JAW GP-PULVERIZER  
  Y [1] PLATE & FILM GP  
   
  169-0382 [1] KIT-MAINTENANCE  
  169-0386 J [2] SHIM (1-MM THK)  
  169-0388 J [2] SHIM (1.5-MM THK)  
  202-6344 [1] BOX AS-STORAGE  
  136-0155 M [2] SETSCREW (M4X0.7X8-MM)  
  J   THESE PARTS MUST BE PACKED INTO THE BOX AS-STORAGE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP54520029
 

329-3577: JAW GP-PULVERIZER

329-3577 JAW GP-PULVERIZER
S/N JMY1-UP
FOR USE WITH MP30 MULTI-PROCESSOR
i03596372 SEBP5452
  For full view, you need register

Parts for your MP15 MULTI PROCESSOR JAW:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  325-0741 Y [1] JAW GP-PULVERIZER  
  Y [1] PLATE & FILM GP  
   
  172-5902 [1] KIT-MAINTENANCE  
  172-5932 J [2] SHIM (1.5-MM THK)  
  172-5933 J [2] SHIM (1-MM THK)  
  202-6344 [1] BOX AS-STORAGE  
  136-0155 M [2] SETSCREW (M4X0.7X8-MM)  
  J   THESE PARTS MUST BE PACKED IN THE BOX AS-STORAGE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Operation and Maintenance Manual
Jaw - Check
MP15, MP20, MP30 and MP40 Multi-Processors
Jaw - Repair
MP15, MP20, MP30 and MP40 Multi-Processors
Special Instruction
Replacement Procedure for the Service Repair Parts on the Multi-Processor Crusher Jaws{6349}
Replacement Procedure for the Service Repair Parts on the Multi-Processor Crusher Jaws{6349}
Replacement Procedure for the Service Repair Parts on the Multi Processor Shear Jaws{0679, 6349}
Replacement Procedure for the Service Repair Parts on the Multi Processor Shear Jaws{0679, 6349}
Replacement Procedure Service Repair Parts on Multi-Processor Pulverizer Jaws{6349}
Replacement Procedure Service Repair Parts on Multi-Processor Pulverizer Jaws{6349}
Conversion Procedure on Certain Multi Processor Jaw Sets{6307, 6348, 6349}
Conversion Procedure on Certain Multi Processor Jaw Sets{6307, 6348, 6349}
Specifications
Combination Jaw, Crusher Jaw, Pulverizer Jaw, and Shear Jaw
MP15, MP20, MP30 and MP40 Multi-Processors
Disassembly and Assembly
Shear Jaw - Disassemble
MP15, MP20, MP30 and MP40 Multi-Processors
Shear Jaw - Assemble
MP15, MP20, MP30 and MP40 Multi-Processors
Crusher Jaw - Disassemble
MP15, MP20, MP30 and MP40 Multi-Processors
Crusher Jaw - Assemble
MP15, MP20, MP30 and MP40 Multi-Processors
Pulverizer Jaw - Disassemble
MP15, MP20, MP30 and MP40 Multi-Processors
Pulverizer Jaw - Assemble
MP15, MP20, MP30 and MP40 Multi-Processors
Combination Jaw - Disassemble
MP15, MP20, MP30 and MP40 Multi-Processors
Combination Jaw - Assemble
MP15, MP20, MP30 and MP40 Multi-Processors
Combination Jaw, Crusher Jaw, Pulverizer Jaw and Shear Jaw - Remove
MP15, MP20, MP30 and MP40 Multi-Processors
Combination Jaw, Crusher Jaw, Pulverizer Jaw and Shear Jaw - Install
MP15, MP20, MP30 and MP40 Multi-Processors
Service Magazine
Cracks In Wear Plates on Certain Work Tools {6110, 6344, 6349, 7000}
Cracks In Wear Plates on Certain Work Tools {6110, 6344, 6349, 7000}
Service Repair Parts Are Available for Certain Multi-Processor Jaws {6349}
2011/01/31

Caterpillar Parts SIS Catalog MP15 :

JAW GP-PULVERIZER
323-6097 JAW GP-PULVERIZER
JAW GP-PULVERIZER
323-6088 JAW GP-PULVERIZER
JAW GP-PULVERIZER
323-6085 JAW GP-PULVERIZER
329-3587 JAW GP-CRUSHER
329-3585 JAW GP-CRUSHER
328-4012 JAW GP-CRUSHER
328-3994 JAW GP-CRUSHER
JAW GP-CRUSHER
325-0810 JAW GP-CRUSHER
JAW GP-PULVERIZER
325-0740 JAW GP-PULVERIZER
JAW GP-PULVERIZER
325-0741 JAW GP-PULVERIZER
JAW GP-PULVERIZER
325-0811 JAW GP-PULVERIZER
JAW GP-PULVERIZER
325-0811 JAW GP-PULVERIZER
328-3996 JAW GP-PULVERIZER
328-3999 JAW GP-PULVERIZER
328-4014 JAW GP-PULVERIZER
328-4016 JAW GP-PULVERIZER

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.