2834069 SHEET AS Caterpillar parts
312D L
Rating:
Alternative (cross code) number:
CA2834069
283-4069
2834069
CA2834069
283-4069
2834069
Weight: 3 pounds 1 kg.
EXCAVATOR,
Compatible equipment models: 2834069:
Number on catalog scheme:
3
For full view, you need register
Information:
Replace shield (8) any time it is removed.7. Use tool (B), and install shield (8) on the carrier assembly until it is against its seat. Use a hammer and punch to stake two places on the side of the shield 180° 5° apart next to the holes in the shield. 8. Install race (10), bearing (12), race (9) and ring (11) on riser (13). 9. Install riser (13) and spring (14) on the governor shaft. 10. Install spool (18) and ring (19) on seat (17), and use tool (C) to install ring (20) to hold them in place.11. Install seat (17) on spring (16) and spring (16) on shield (15). 12. Install dashpot assembly (21) on the governor shaft as shown. 13. Install the ring in the lower groove in the governor shaft. Install sleeve (22), spring (24), sleeve (23) and bearing (25) on the governor shaft.14. Use tool (D) to hold spring (24) in compression, and install the ring in the groove in the governor shaft. 15. Put lever (30) in position on governor servo (26), and install pin (27) to hold the lever in place. Use a hammer and chisel to move the metal (stake) four places 90° apart on the outside surface on both legs of the governor servo to hold pin (27) in place.16. Install the O-ring seal on sleeve (28). Install piston (29) and sleeve (28) in the governor servo as shown. 17. Install valve (31) in the governor servo as shown. 18. Install one lockring (35) in the groove near the center of valve (31). Put sleeve (32), spring (broken link spring) (33) and seat (34) in position on valve (31), and install the other lockring (35) to hold them in place. 19. Put governor servo (26) in position on the fuel injection pump housing with piston (29) engaged over the rack and the lever engaged in the groove in riser (13). 20. If the dowel was removed from block (38), install it in the block 31 0.5 mm (1.22 .02 in.) above the outside surface of the block.21. Install bolt (39) in block (38). Install spring (37) on bolt (39).22. Install the stop screw, power setting screw and locknut in collar (36).23. Put collar (36) in position on bolt (39), and install the bolt that holds the collar to the bolt. 24. If dowels (41) were removed from the
Caterpillar parts catalog:
Parts sheet Caterpillar catalog:
2035005
SHEET
311C, 311D LRR, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 315C
311C, 311D LRR, 312C, 312C L, 312D, 312D L, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP, 315C
2896816
SHEET AS
312D, 312D L
312D, 312D L
2784056
SHEET
312D, 312D L, 313D
312D, 312D L, 313D
3138233
SHEET
312D, 312D L, 312D2, 312D2 GC, 312D2 L, 313D, 313D2
312D, 312D L, 312D2, 312D2 GC, 312D2 L, 313D, 313D2
2936955
SHEET AS
312D, 312D L
312D, 312D L
2937010
SHEET AS
312D, 312D L, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP
312D, 312D L, 312D2, 312D2 GC, 312D2 L, 313D, 313D2, 313D2 LGP
2937014
SHEET AS
312D, 312D L, 313D
312D, 312D L, 313D
3421012
SHEET AS
312D L
312D L
3346493
SHEET AS
312D, 312D L, 312E, 312E L, 315D L, 316E L, 318E L, 319D L, 319D LN, 320D, 320D L, 320D LRR, 320D RR, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 323D L, 323D LN, 323D SA, 323E L, 324D, 324D L, 324E, 32...
312D, 312D L, 312E, 312E L, 315D L, 316E L, 318E L, 319D L, 319D LN, 320D, 320D L, 320D LRR, 320D RR, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 323D L, 323D LN, 323D SA, 323E L, 324D, 324D L, 324E, 32...
2896841
SHEET AS
312D L
312D L
3727624
SHEET AS
315D L, 319D L
315D L, 319D L
3335136
SHEET AS
314D LCR
314D LCR
3273187
SHEET AS
314D LCR
314D LCR
3273184
SHEET AS
314D LCR
314D LCR
2931218
SHEET AS
314D CR, 314D LCR
314D CR, 314D LCR
3421094
SHEET AS
314D CR, 314D LCR
314D CR, 314D LCR
3346497
SHEET AS
312D, 312D L, 312E, 312E L, 315D L, 316E L, 318E L, 319D L, 319D LN, 320D, 320D L, 320D LRR, 320D RR, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 323D L, 323D LN, 323D SA, 323E L, 324D, 324D L, 324E, 32...
312D, 312D L, 312E, 312E L, 315D L, 316E L, 318E L, 319D L, 319D LN, 320D, 320D L, 320D LRR, 320D RR, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 323D L, 323D LN, 323D SA, 323E L, 324D, 324D L, 324E, 32...
3346493
SHEET AS
312D, 312D L, 312E, 312E L, 315D L, 316E L, 318E L, 319D L, 319D LN, 320D, 320D L, 320D LRR, 320D RR, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 323D L, 323D LN, 323D SA, 323E L, 324D, 324D L, 324E, 32...
312D, 312D L, 312E, 312E L, 315D L, 316E L, 318E L, 319D L, 319D LN, 320D, 320D L, 320D LRR, 320D RR, 320E, 320E L, 320E LN, 320E LRR, 320E RR, 323D L, 323D LN, 323D SA, 323E L, 324D, 324D L, 324E, 32...
3421012
SHEET AS
312D L
312D L
3420980
SHEET
312D, 312D L
312D, 312D L
3420979
SHEET
312D, 312D L
312D, 312D L