SUPPORT AS 1413980 - Caterpillar

Illustration 12 g03260057
(14a) 392-1548 Plate (14b) 392-1549 Plate
Mount 392-1548 Plate (14a) to the right side antislab plate by using 8T-4186 Bolts (15), 8T-4133 Nuts (16) and 7X-7729 Washers (9) .
Mount 392-1549 Plate (14b) to the left side of the antislab plate by using 8T-4186 Bolts (15), 8T-4133 Nuts (16) and 7X-7729 Washers (9) .
Illustration 13 g03260136
()
Mount 392-1544 Tubes (17) on to 392-1548 Plate (14a) using 162-8352 U-Bolts (18), 392-1550 Plates (19), 8T-4133 Nuts (16) and 7X-7729 Washers (9) .
Mount 392-1544 Tubes (17) on to 392-1549 Plate (14b) using 162-8352 U-Bolts (18), 392-1550 Plates (19), 8T-4133 Nuts (16) and 7X-7729 Washers (9) .
Illustration 14 g03260436
Mount the 392-1547 Plate As (20) on to 392-1544 Tubes (17) on the right and left-hand side. Mount by using 268-3212 Bolts (21), 7X-0510 Hard Washers (22), 9S-0798 Bushings (23), 096-4876 Nuts (24) and .
Illustration 15 g03260578
Lock the mount to 392-1547 Plate As (20) on to 392-1544 Tubes (17) on the right and left-hand side using 8B-1056 Clevis Pins (22) and 5P-8837 Lock Pins (26) .Ground Clearance Adjustment (2.0m Rotor Chamber)
Illustration 16 g03260601
Remove bolts (27) and washers (28) form guard (29) on the upper right side of the rotor chamber.
Illustration 17 g03260656
Reassemble guard (29) by using 7X-2537 Bolts (30), 5P-4116 Hard Washers (31) and 6V-3964 Hard Washers (32). Adjust guard (29) to provide clearance larger or equal to 12 mm (0.470 inch) with the frame in order to take out sensor harness.Ground Clearance Adjustment (2.2m Rotor Chamber)
Illustration 18 g03260839
Illustration 19 g03260841
Aging on bolts (33) on the upper right side of the rotor chamber, adjust guard (34) to provide clearance larger or equal to 12 mm (0.470 inch) with the frame in order to take out sensor harness.