TANK GP-HYDRAULIC 2699203 - Caterpillar

Installation Procedure
Illustration 1 g01158458
Install housing (23) onto main pump assembly (13). Install bolts (22).
Illustration 2 g01158451
Install coupling (21) and install bolts (20).
Illustration 3 g01158446
Install coupling (19) and install bolts (18).
Illustration 4 g01159062
Install coupling (17) and bearing (16).
Illustration 5 g01158439
Install pilot gear pump (15) and install bolts (14).
Illustration 6 g01158418
Attach a suitable lifting device to main pump assembly (13). The weight of main pump assembly (13 ) is approximately 72 kg (160 lb). Install main pump assembly (13) and install bolts (12).
Illustration 7 g01158412
Connect hose assemblies (10) and (11).
Illustration 8 g01158359
Connect tube (9).
Illustration 9 g01157784
Connect block (6) and install bolts (7). Connect block (4) and install bolts (3). Connect hose assemblies (5) and (8).
Illustration 10 g01158343
Install brace (1) and install bolts (2).
Fill the hydraulic oil. Refer to Operation and Maintenance Manual, "Hydraulic System Oil - Change". End By:
Install the hood. Refer to Disassembly and Assembly, "Hood - Remove and Install".