AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

2138200 CYL GP-SEAL& PART OF 2190114-Page 1 2141591-Page 57 325C L EXCAVATOR


HYDRAULIC SYSTEM
CYLINDER GP
LINES GP-CYLINDER
CYLINDER GP
LINES GP-RETURN
LINES GP-AUXILIARY
LINES GP-FRONT

EXCAVATOR 325C L EXCAVATOR BMM
 325C SUPPLEMENT FOR EXCAVATOR /MATERIAL HANDLER/ BMM00375-UP (MACHINE) XEBP8157 325C L BMM   (2001)

HYDRAULIC SYSTEM

CYLINDER GP
GUARD GP-STICK
207-4558 GUARD GP-STICK
CYL GP-SEAL
213-8200 CYL GP-SEAL
CYLINDER GP-BOOM
214-1591 CYLINDER GP-BOOM
CYLINDER GP-STICK
253-6503 CYLINDER GP-STICK
CYL GP-SEAL&
203-3927 CYL GP-SEAL&
CYLINDER GP-BOOM
203-3906 CYLINDER GP-BOOM
 

#XEBP81570030
 

213-8200: CYL GP-SEAL

2138200 CYL GP-SEAL&
PART OF 2190114-Page 1
2141591-Page 57
c965804 XEBP8157
2138200 CYL GP-SEAL Parts scheme
  For full view, you need register

Parts for your 325C L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 214-1591 Y [1] CYLINDER GP  
2. 9X-4597 [4] SEAL (LIP)  
 

#XEBP81570031
 

214-1591: CYLINDER GP-BOOM

2141591 CYLINDER GP-BOOM
PART OF 2138200-Page 56
c965805 XEBP8157
2141591 CYLINDER GP-BOOM Parts scheme
  For full view, you need register

Parts for your 325C L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 214-1592 [1] CYLINDER AS  
2. 7Y-4622 [1] LOCKNUT  
3. 118-4019 J [1] RING  
4. 9X-3595 J [1] SEAL AS  
5. 7Y-4632 J [1] RING  
6. 7I-7183 [1] PISTON  
7. 7I-1351 [1] STOP  
8. 7I-1352 [1] RING (SEAL)  
9. 095-1631 J [1] SEAL  
10. 198-2645 J [1] RING  
11. 7I-1353 [1] HEAD  
12. 7Y-5216 [8] BOLT  
13. 093-1571 [1] RING  
14. 114-0758 [1] BEARING  
15. 167-2212 J [1] SEAL AS  
16. 167-2325 J [1] SEAL  
17. 096-1588 J [1] RING  
18. 167-2473 J [1] SEAL  
19. 214-1597 [1] ROD AS  
    THE FOLLOWING REPAIR KIT IS AVAILABLE:
  211-9614 [1] SEAL KIT (INCLUDES PARTS MARKED J)  
 

#XEBP81570032
 

253-6503: CYLINDER GP-STICK

2536503 CYLINDER GP-STICK
PART OF 2190114-Page 1
ONLY S/N: BMM00525~BMM00542
c965806 XEBP8157
2536503 CYLINDER GP-STICK Parts scheme
  For full view, you need register

Parts for your 325C L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 253-6507 [1] CYLINDER AS  
2. 253-6508 [1] ROD AS  
3. 188-4177 [1] HEAD  
4. 105-2575 [1] BEARING  
5. 093-1571 [1] RING  
6. 204-3624 J [1] SEAL  
7. 105-2577 J [1] SEAL  
8. 105-2578 J [1] RING  
9. 126-1885 J [1] SEAL  
10. 095-1719 J [1] SEAL  
11. J [1] RING  
12. 4I-3628 [8] BOLT  
13. 107-6430 [1] STOP  
14. 126-1870 J [1] RING  
15. 105-2582 [1] PISTON  
16. 086-1345 J [1] SEAL AS  
17. 105-2583 J [2] RING  
18. 247-9006 J [2] RING  
19. 086-1346 J [2] RING  
20. 096-4441 [1] SHIM  
21. 185-0195 [1] LOCKNUT  
22. 096-3216 [1] SETSCREW  
23. 096-3891 [1] BALL  
24. 137-2817 [2] BEARING  
25. 9X-4597 [4] SEAL  
26. 3B-8489 [1] FITTING  
    THE FOLLOWING REPAIR KIT IS AVAILABLE:
  259-0628 [1] SEAL KIT (INCLUDES PARTS MARKED J)  
 

#XEBP81570033
 

223-1471: CYLINDER GP-LINES

2231471 CYLINDER GP-LINES (LH)
PART OF 2190114-Page 2
2033927-Page 63
c965807 XEBP8157
2231471 CYLINDER GP-LINES Parts scheme
  For full view, you need register

Parts for your 325C L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 115-8856 [1] SUPPORT AS  
2. 196-8731 [1] VALVE GP  
3. 203-3927 Y [1] CYL GP (SEAL &)  
4. 205-7359 [1] SUPPORT AS  
5. 224-7462 [1] TUBE AS  
6. 224-7463 [1] TUBE AS  
7. 148-8341 [1] CONNECTOR AS  
8. 1P-3704 [2] SEAL  
9. 236-2759 [1] HOSE AS  
10. 4I-1674 [2] CLIP  
11. 5P-7464 [1] CLIP  
12. 5P-7465 [1] CLIP  
13. 6V-9746 [2] SEAL  
14. 8T-2920 [1] GROMMET  
15. 8T-4121 [4] WASHER  
16. 8T-4196 [4] BOLT  
17. 8T-4223 [3] WASHER  
18. 8T-4910 [12] BOLT  
19. 8T-4956 [3] BOLT  
  Y   SEE SEPARATE ILLUSTRATION
 

#XEBP81570034
 

223-1472: CYLINDER GP-LINES

2231472 CYLINDER GP-LINES (RH)
PART OF 2190114-Page 2
2033927-Page 63
c965808 XEBP8157
2231472 CYLINDER GP-LINES Parts scheme
  For full view, you need register

Parts for your 325C L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 115-8856 [1] SUPPORT AS  
2. 196-8731 [1] VALVE GP  
3. 203-3927 Y [1] CYL GP (SEAL &)  
4. 205-7359 [1] SUPPORT AS  
5. [1] TUBE AS  
6. [1] TUBE AS  
7. 236-2759 [1] HOSE AS  
8. 148-8341 [1] CONNECTOR AS  
9. 1P-3704 [2] SEAL  
10. 4I-1674 [2] CLIP  
11. 5P-7464 [1] CLIP  
12. 5P-7465 [1] CLIP  
13. 6V-9746 [2] SEAL  
14. 8T-2920 [1] GROMMET  
15. 8T-4121 [4] WASHER  
16. 8T-4196 [4] BOLT  
17. 8T-4223 [3] WASHER  
18. 8T-4910 [12] BOLT  
19. 8T-4956 [3] BOLT  
  Y   SEE SEPARATE ILLUSTRATION
 

#XEBP81570035
 

203-3927: CYL GP-SEAL&

2033927 CYL GP-SEAL&
PART OF 2231471-Page 59, PART OF 2231472-Page 61
2033906-Page 64
c965809 XEBP8157
2033927 CYL GP-SEAL& Parts scheme
  For full view, you need register

Parts for your 325C L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9X-4597 [4] SEAL  
2. 203-3906 Y [1] CYLINDER GP  
3. 3B-8489 [1] FITTING  
  Y   SEE SEPARATE ILLUSTRATION
 

#XEBP81570036
 

203-3906: CYLINDER GP-BOOM

2033906 CYLINDER GP-BOOM
PART OF 2043927-Page 57
c965810 XEBP8157
2033906 CYLINDER GP-BOOM Parts scheme
  For full view, you need register

Parts for your 325C L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 203-3907 [1] CYLINDER AS  
2. 7Y-4695 [1] LOCKNUT  
3. 116-3589 J [1] RING  
4. 9X-3601 J [1] SEAL AS  
5. 096-1581 J [1] RING  
6. 7I-7180 [1] PISTON  
7. 5I-8516 [1] RING  
8. 6I-6798 [1] STOP  
9. 095-1633 J [1] SEAL  
10. 198-2643 J [1] RING  
11. 7Y-4672 [1] RING  
12. 203-3909 [1] ROD AS  
13. 7Y-5215 [8] BOLT  
14. 114-0760 [1] BEARING  
15. 167-2217 J [1] SEAL AS  
16. 167-2332 J [1] SEAL  
17. 7Y-4669 J [1] RING  
18. 165-9290 J [1] SEAL  
19. 205-8622 [1] HEAD  
    THE FOLLOWING REPAIR KIT IS AVAILABLE:
  202-2364 [1] SEAL KIT (INCLUDES PARTS MARKED J)  
 

#XEBP81570037
 

218-1103: LINES GP-RETURN & FILTER

2181103 LINES GP-RETURN & FILTER
PART OF 2190114-Page 1
c965811 XEBP8157
2181103 LINES GP-RETURN & FILTER Parts scheme 2181103 LINES GP-RETURN & FILTER Parts scheme
  For full view, you need register

Parts for your 325C L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4984 [4] CLAMP (HOSE)  
2. 141-1316 [1] HOSE AS  
3. 144-0367 [2] CLAMP (HOSE)  
4. 173-4672 [1] VALVE GP (CHECK)  
5. 187-5661 [1] PIPE AS  
6. 187-6721 [1] PLATE  
7. 196-0945 [1] PIPE AS  
8. 196-0947 [1] PIPE AS  
9. 196-0950 [1] PIPE AS  
10. 199-1607 [1] PIPE AS  
11. 213-3289 [1] PIPE AS  
12. 213-3290 [1] ADAPTER  
13. 221-4872 [1] HOSE  
14. 221-4943 [2] HOSE  
15. 223-6647 [1] SUPPORT AS  
16. 101-7402 [4] BOLT (HEX SOCKET)  
17. 148-8330 [1] CONNECTOR AS  
18. [1] PLUG AS  
19. 148-8431 [1] TEE AS  
20. 148-8445 [1] TEE AS  
21. 4J-0524 [4] SEAL-O-RING  
22. 4J-0527 [2] SEAL-O-RING  
23. 5P-7468 [1] CLIP  
24. 5P-7469 [1] CLIP  
25. 6J-2680 [2] SEAL-O-RING  
26. 6V-1874 [1] GROMMET  
27. 7X-2544 [4] BOLT  
28. 7Y-5247 [1] BOLT  
29. 8T-4121 [8] WASHER (HARD)  
30. 8T-4133 [2] NUT  
31. 8T-4136 [2] BOLT  
32. 8T-4139 [18] BOLT  
33. 8T-4223 [7] WASHER (HARD)  
34. 8T-4956 [1] BOLT  
35. 8T-6868 [4] BOLT  
 

#XEBP81570038
 

218-1111: LINES GP-AUXILIARY HYDRAULIC

2181111 LINES GP-AUXILIARY HYDRAULIC
PART OF 2190114-Page 1
c965813 XEBP8157
2181111 LINES GP-AUXILIARY HYDRAULIC Parts scheme 2181111 LINES GP-AUXILIARY HYDRAULIC Parts scheme
  For full view, you need register

Parts for your 325C L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 223-6713 [1] SUPPORT  
2. 213-3291 [1] TUBE AS  
3. 139-1596 [1] PLATE  
4. 231-0862 [1] VALVE GP  
5. 144-7090 [1] CLIP  
6. 144-7091 [1] CLIP  
7. 204-4538 [1] FLANGE  
8. 1P-4578 [4] FLANGE  
9. 1P-4579 [2] FLANGE  
10. 148-8334 [1] CONNECTOR AS  
11. 148-8328 [1] CONNECTOR AS  
12. 148-8457 [2] UNION AS  
13. 148-8347 [1] ELBOW AS  
14. 148-8387 [1] ELBOW AS  
15. 148-8356 [1] ELBOW AS  
16. 148-8359 [1] ELBOW AS  
17. 148-8364 [1] ELBOW AS  
18. 148-8444 [1] TEE AS  
19. 148-8418 [2] REDUCER AS  
20. 148-8352 [3] ELBOW AS  
21. 148-8323 [1] CONNECTOR  
22. 5K-9090 [3] SEAL  
23. 115-8645 [1] GUARD  
24. 4J-0524 [2] SEAL  
25. 4J-0522 [2] SEAL  
26. 110-5493 [1] HOSE AS  
27. 124-1297 [1] HOSE AS  
28. 235-6983 [1] HOSE AS  
29. 221-2572 [1] HOSE AS  
30. 221-2573 [1] HOSE AS  
31. 235-6988 [1] HOSE AS  
32. [1] HOSE AS  
33. 087-4480 [1] HOSE AS  
34. 202-4014 [1] HOSE AS  
35. 4T-2958 [1] HOSE AS  
36. 223-6701 [1] HOSE AS  
37. 5P-7468 [2] CLIP  
38. 5P-7469 [2] CLIP  
39. 6V-1874 [2] GROMMET  
40. 199-2045 [1] SPACER  
41. 8T-4196 [8] BOLT  
42. 8T-4121 [8] WASHER  
43. 8T-4956 [4] BOLT  
44. 8T-4183 [4] BOLT  
45. 8T-3957 [4] BOLT  
46. 7X-2550 [1] BOLT  
47. 8T-4179 [1] BOLT  
48. 8T-4223 [12] WASHER  
49. 7X-2553 [2] BOLT  
50. 9X-8257 [2] WASHER  
51. 8T-4244 [4] NUT  
52. 6V-9169 [2] NUT  
53. 6V-8556 [2] NUT  
54. 7K-1181 [6] STRAP  
55. 8T-4139 [2] BOLT  
 

#XEBP81570039
 

218-1102: LINES GP-FRONT

2181102 LINES GP-FRONT
PART OF 2190114-Page 1
c965815 XEBP8157
2181102 LINES GP-FRONT Parts scheme 2181102 LINES GP-FRONT Parts scheme
  For full view, you need register

Parts for your 325C L EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 207-6701 [1] HOSE AS  
2. 187-6027 [1] HOSE AS  
3. 1P-3703 [8] SEAL (RECTANGLE)  
4. 4I-1674 [2] CLIP  
5. 8T-4139 [4] BOLT  
6. 8T-4223 [14] WASHER (HARD)  
7. 7Y-7904 [4] HOSE AS  
8. 8T-4910 [6] BOLT  
9. 214-4511 [1] FLANGE AS  
10. 101-7404 [26] BOLT (HEX SOCKET)  
11. 5K-9090 [3] SEAL-O-RING  
12. 105-3483 [2] BOLT (HEX SOCKET)  
13. 6V-0400 [2] FLANGE (HALF)  
14. 8T-4184 [4] BOLT  
15. 164-4180 [1] PLUG GP  
16. 187-5935 [1] BLOCK  
17. 1P-3704 [1] SEAL (RECTANGULAR)  
18. 201-9379 [1] BLOCK  
19. 4J-5267 [5] SEAL-O-RING  
20. 199-1286 [6] BOLT (SOCKET HEAD)  
21. 8T-4186 [4] BOLT  
22. 101-7403 [2] BOLT (SOCKET HEAD)  
24. 193-9945 [1] SUPPORT AS  
25. 4J-5268 [1] SEAL  
26. 184-9575 [1] TUBE AS  
27. 6V-9746 [6] SEAL-O-RING  
29. 184-9216 [1] HOSE AS  
30. 133-5828 [1] SUPPORT AS  
31. 108-7550 [1] CLIP  
32. 148-8335 [1] CONNECTOR AS  
33. 194-0174 [1] HOSE GP  
34. 194-0177 [1] HOSE GP  
35. 194-0180 [1] HOSE GP  
36. 8T-4136 [12] BOLT  
37. 102-0730 [3] COVER  
38. 202-3979 [1] HOSE AS  
39. 212-5146 [2] TUBE AS  
40. 116-3600 [2] VALVE GP (RELIEF)  
41. 185-0488 [1] BLOCK  
42. 6V-9833 [2] CAP AS  
43. 199-1924 [1] TUBE AS  
44. 8T-6466 [4] BOLT  
45. 199-1922 [1] TUBE AS  
 

Information:

Special Instruction
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Instructions for Installation of Oversize Hydraulic Cylinder Seals {7555, 7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Vented Buffer Seal Assembly, U-Cup Seal, and Double Lip Wiper Seal for Hydraulic Cylinders{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Installation of Double Lip Wiper Seal{7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Technical Information Bulletin
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
The Failure of the Buffer Seal that can be Caused by a Defect in the Seal Groove on All Track-Type Tractors, Wheel Loaders, Hydraulic Excavators and Backhoe Loaders that Use Cylinders that were Manufactured After 1January 2000{7562}
Preventing Failures of the Thumb Cylinder on Certain Excavators{5051, 5457}
Preventing Failures of the Thumb Cylinder on Certain Excavators{5051, 5457}
Discoloration of the Hydraulic Cylinder Rod on Certain Excavators{5102, 5456, 5457, 5458, 5468, 7562}
Discoloration of the Hydraulic Cylinder Rod on Certain Excavators{5102, 5456, 5457, 5458, 5468, 7562}
Surface Finishes of Cylinder Bores{7562}
Surface Finishes of Cylinder Bores{7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Color Change for Cylinder Rod Seals (Wiper, U-Cup and Buffer){5100, 7555, 7562}
Specifications
Boom Cylinder
325C Excavator Machine System Specifications
Stick Cylinder
325C Excavator Machine System Specifications
Bucket Cylinder
325C Excavator Machine System Specifications
Boom Cylinder Lines
325C Excavator Machine System Specifications
Boom Lines
325C Excavator Machine System Specifications
Boom Lines
325C Excavator Machine System Specifications
Bucket Cylinder
325C Excavator Machine System Specifications
Bucket Cylinder
325C Excavator Machine System Specifications
Tool Operating Manual
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
Procedures for Using the 232-4686 Cylinder Washer Tank Group European Union Compliant{0374, 0599, 0680, 0738}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
1U-9001 and 1U-9002 Automatic Hone Tooling{0599, 0677, 0738, 7562, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
Model HCS-40 Hydraulic Cylinder Servicer{0374, 0599, 0700, 0738, 7562}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
4C-9910 Portable Hydraulic Tester (Flow 125 GPM) {0599, 0784, 5050, 5057, 5095}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Using the 9U-7868 and 9U-7869 Spanner Wrench to Remove and install Threaded Gland Cylinder Heads{0374, 0599, 0602, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Procedures for Using the 120-9143 Cylinder Washer Tank Group {0374, 0602, 0680, 0738}
Systems Operation
Cylinders (Boom, Stick and Bucket)
325C Excavator Hydraulic System
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
Machining the O-ring Groove into the Face of Oversized Bolted Head Hydraulic Cylinders {0677, 5100, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Thermal Spray Procedures for Hydraulic Cylinder Rods{0679, 7562, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Custom Service Information
Custom Product Support Literature for the Hydraulic Adjustment Procedure for the Long Reach Front on 320C L, 322C L, 325C L and 330C L Excavators{5050, 5117, 5456, 5458}
Custom Product Support Literature for the Hydraulic Adjustment Procedure for the Long Reach Front on 320C L, 322C L, 325C L and 330C L Excavators{5050, 5117, 5456, 5458}
Testing and Adjusting
Cylinder Drift - Check - Empty Bucket
325C Excavator Hydraulic System
Cylinder Drift - Check - Loaded Bucket
325C Excavator Hydraulic System
Cylinder Speed - Check
325C Excavator Hydraulic System
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Disassembly and Assembly
Stick Cylinder - Remove and Install
325C Excavator Machine Systems
Boom Cylinder - Remove and Install
325C Excavator Machine Systems
Bucket Cylinder - Remove and Install
325C Excavator Machine Systems
Service Magazine
Double Lip Wiper Seals Must Be Installed Properly {7562}
2002/12/09
Summary of the New Seals for Hydraulic Cylinder Rods {5456, 5457, 5458}
2003/11/17
Boom Cylinder Link Assemblies Support Implement During Service {0635, 0738}
2004/03/08
The Straight Travel Control Spool Has Been Improved {5051, 5457}
2004/06/21
New Seals Are Available for the Prevention of Oil Leaks in Cold Temperature Conditions {5456, 5457, 5458}
2006/09/25
Procedure Now Available to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
2012/10/04
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Compatible Puller Stud and Hydraulic Cylinder Capacity Chart {0599, 7000, 7562}
Correct Ring Orientation Provides Smooth Hydraulic Cylinder Operation {5456, 5458}
2009/03/16
A Rework Procedure Improves the Seal Assembly Performance in Hydraulic Cylinders on Cat Products {7562}
2010/04/30
Service Limit of the Bushings At the Front Linkages Are Now Available on Certain Excavators {5456, 5457, 5458, 6060, 6301, 6302, 6460, 6501, 6502, 6516, 6521, 6535, 6536}
Service Limit of the Bushings At the Front Linkages Are Now Available on Certain Excavators {5456, 5457, 5458, 6060, 6301, 6302, 6460, 6501, 6502, 6516, 6521, 6535, 6536}

Caterpillar Parts SIS Catalog 325C L :

GUARD GP-STICK
207-4558 GUARD GP-STICK
LINES GP-PILOT
213-8210 LINES GP-PILOT
LINES GP-STICK
213-8207 LINES GP-STICK
LINES GP-STICK
213-8205 LINES GP-STICK
LINES GP-BOOM
215-3213 LINES GP-BOOM
LINES GP-BOOM
213-8201 LINES GP-BOOM
ROLLER AR-HD
220-2328 ROLLER AR-HD
TRACK GP
188-3240 TRACK GP
CYLINDER GP-BOOM
214-1591 CYLINDER GP-BOOM
CYLINDER GP-STICK
253-6503 CYLINDER GP-STICK
CYLINDER GP-LINES
223-1471 CYLINDER GP-LINES
CYLINDER GP-LINES
223-1472 CYLINDER GP-LINES
CYL GP-SEAL&
203-3927 CYL GP-SEAL&
CYLINDER GP-BOOM
203-3906 CYLINDER GP-BOOM
LINES GP-RETURN & FILTER
218-1103 LINES GP-RETURN & FILTER
LINES GP-AUXILIARY HYDRAULIC
218-1111 LINES GP-AUXILIARY HYDRAULIC

Truck sale:

Caterpillar 325CL, Construction
71,254 
Caterpillar 325CL, Construction
- Crawler Excavators
FINNING CANADA
Canada
Caterpillar 325CL, Construction
59,000 
Caterpillar 325CL, Construction
- Crawler Excavators
HOLT CAT
Caterpillar 325CL, Construction
42,500 
Caterpillar 325CL, Construction
- Crawler Excavators
WHAYNE SUPPLY COMPANY
Caterpillar 325CL, Construction
59,000 
Caterpillar 325CL, Construction
- Crawler Excavators
ZIEGLER CAT
Caterpillar 325CL, Construction
62,500 
Caterpillar 325CL, Construction
- Crawler Excavators
N C MACHINERY CO.
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.