ENGINE AR-COMPLETE 1399750 - Caterpillar

When the material feed screen is selected, information for the material feed system is displayed. Current conveyor and auger speeds are displayed in rpm for the left and right feed systems. Adjustments to the material height can be made from the screed operator stations. The left conveyor material height adjuster (1) is located in the upper left of the screen. The material height setting is displayed in the middle of the adjuster. The setting is adjusted using the plus/minus arrows on each end of the adjuster. The setting color changes to yellow when an adjustment is made and is pending. OK icon (6) must be used for the change to take effect. The right conveyor material height adjuster works in the same manner.The left auger material height setting (2) is located in the lower left of the screen. The auger material height setting is adjusted with rotary dial (3). For adjustment to occur, the material feed mode must be selected with mode selector switch (5), and indicated on mode indicator (4). The upper left indicator is material feed mode.Note: Auger material height control is respective to the side the screed operator station is mounted to.Note: For additional information on the material feed system, refer to the tractor documentation.Compaction Screen
Illustration 8 g03815975
Compaction Screen (1) Vibratory switch (2) Vibratory speed setting (3) Screed assist pressure (4) Rotary dial (5) Mode indicator (6) Mode selector switch (7) Machine speed (8) Settings iconWhen the compaction screen is selected, information for the vibratory system and screed assist system is displayed. Vibratory switch (1) and vibratory speed setting (2) are located in the upper left of the screen. The switch turns the vibratory system on and off. The speed setting can be adjusted using rotary dial (4). For adjustment to occur, the vibratory mode must be selected and indicated via mode selector switch (6) and mode indicator (5). The lower right indicator is vibratory mode.Screed assist pressure (3) is located in the middle left of the screen. The "Up" pressure setting can be adjusted using rotary dial (4). For adjustment to occur, the screed assist mode must be selected and indicated via mode selector switch (6) and mode indicator (5). The lower left indicator is screed assist mode. Settings icon (8) is used to access other screed assist settings.
Illustration 9 g03815976
Assist Screen (9) Up pressure setting (10) Standby Up incremental bar (11) OK button (12) Down incremental barWhen settings icon (8) is tapped, the display changes to the screed assist screen. This screen shows the pressure setting adjuster bars for the screed assist system.The "Up" pressure setting (9) is identical to screed assist pressure (3), and is adjusted in the same manner. The "Standby Up" incremental bar (10) and the "Down" incremental bar (12) are used to adjust the corresponding pressure setting. These values are adjusted by the add or subtract icons on either end of the bars. OK button (11) must be used to set the new value. The assist pressures are adjustable from 100