ENGINE AR-COMPLETE 1399864 - Caterpillar

Illustration 8 g03383608
Install cover (34). Tighten cover (34) to a torque of 20 5 N m (177 44 lb in).
Illustration 9 g03365554
Install electronic control (31). Install cable straps (32) and connect harness assembly (33) .
Illustration 10 g03365547
Install control module (30). Install bolts (29) to a torque of 10 2 N m (89 18 lb in).
Illustration 11 g03365540
Note: Do not use an impact on the bolts for relays (28) .
Install relays (28) .
Illustration 12 g03365528
Note: Do not use an impact on the bolts for solenoid assembly (27) .
Install solenoid assembly (27). Connect harness assembly (26) .
Illustration 13 g03365521
Install plug (24) and plug (25) on manifold (22). Install O-ring seals (23) in cap (21) .
Illustration 14 g03365514
Note: Do not use an impact on bolts (19) .
Install manifold (20). Install bolts (19). Install cap (17). Install bolts (18). Tighten bolts (18) to a torque of 6 1 N m (53 9 lb in)
Illustration 15 g03365493
Install bracket (16) on the tank. Install bolts (15) .
Illustration 16 g03365477
Install pump assembly (14) and bolts (13) .
Illustration 17 g03365475
Note: Do not use an impact on bolt (12) .
Install bolt (12). Tighten bolt (12) to a torque of 4 1 N m (35 9 lb in)
Illustration 18 g03365468
Install bolts (11) .
Illustration 19 g03365465
Install the gasket (not shown), manifold (10), plate (9), and bolts (8). Tighten bolts (8) in an alternating sequence to a torque of 5 1 N m (44 9 lb in). Tighten bolts (8) a second time in an alternating sequence to a torque of 5 1 N m (44 9 lb in).
Illustration 20 g03365463
Connect harness assembly (7) and install cable straps (6) .
Illustration 21 g03365452
Note: Do not use an impact on the bolts for clips (1) and (5) .
Install hoses (3). Apply Tooling (A) to the O-rings (not shown) inside hose assemblies (4). Connect hose assemblies (4). Connect harness assemblies (2). Install clips (1). Tighten the bolts for clips (1) to a torque of 6 1 N m (53 9 lb in). Install clips (5) .