ENGINE AR-COMPLETE 2444836 - Caterpillar

Illustration 1 g01991153
Top view
Table 1
Specification for 337-1521 Upper Frame
Item Qty Part Specification Description
Before assembly, use 5P-0960 Grease Cartridge in order to coat all the pin bores.
1 As required, use the following shims in order to adjust the maximum lateral clearance to 1.0 mm (0.04 inch) for Gosselies facility.
2 133-2427 Shim Thickness is 0.5 mm (0.02 inch).
4 093-0090 Shim Thickness is 1.0 mm (0.04 inch).
2 2 186-5663 Pin As Diameter is 99.850 0.040 mm (3.9311 0.0016 inch).
A - - Clearance between the pin end and the side of the cab must be kept over 10.0 mm (0.39 inch).
3 As required, use the following shims in order to adjust the maximum lateral clearance.
Lateral clearance for Gosselies facility is 1.0 mm (0.04 inch).
Lateral clearance except for Gosselies facility is 1.6 mm (0.06 inch)
1 308-8781 Shim Thickness is 0.5 mm (0.02 inch).
2 308-8782 Shim Thickness is 1.0 mm (0.04 inch).
1 308-8783 Shim Thickness is 2.0 mm (0.08 inch).
4 1 260-2385 Pin As Diameter is 109.85 0.04 mm (4.325 0.002 inch).