Lafayette 3606 Engine BCCWT00 - Caterpillar

Illustration 1 g06264399
Table 1
Item Qty Part Specification Description
1 1 481-1726 Pin Coat the bore for the pin with black 5P-0960 Grease Cartridge.
2 8 144-4084 Bolt Torque to 520 70 N m (384 52 lb ft).
As required, use the following shim rings in order to adjust maximum allowed clearance to 0.5 mm (0.02 inch) in between the cutting edges of upper jaw and lower jaw. Total shims should be evenly distributes between upper jaw and lower jaw:
3 2 482-5791 Ring Shim Thickness of one shim is 2.00 0.15 mm (0.078 0.006 inch)
4 2 482-5792 Ring Shim Thickness of one shim is 2.50 0.15 mm (0.098 0.006 inch)
5 2 482-5793 Thickness of one shim is 3.0 0.15 mm (0.118 0.006 inch)
6 2 482-5795 Ring Shim Thickness of one shim is 5.00 0.15 mm (0.196 0.006 inch)
7 1 481-1723 Pin Coat the bore for the pin with black 5P-0960 Grease Cartridge.
8 1 481-1724 Nut Use the following procedure in order to tighten the nut:
1. Tighten the nut to 300 50 N m (221 37 lb ft).
2. Backoff the nut until the nearest set of holes is aligned.
9 4 8T-8441 Bolt Before assembly, apply blue Loctite 243 to the threads.
10 2 144-5478 Bolt Torque to 520 70 N m (384 52 lb ft).
11 10 144-5479 Bolt Coat the bore for the pin with black 5P-0960 Grease Cartridge.
12 1 481-1725 Pin Coat the bore for the pin with black 5P-0960 Grease Cartridge.
As required, use the following shim plates in order to adjust maximum allowed clearance to 0.5 mm (0.02 inch) in between the cutting edges of upper jaw and lower:
- 6 541-2340 Shim Plate Thickness of one shim is 1.0 mm (0.04 inch).
- 2 541-2341 Shim Plate Thickness of one shim is 1.5 mm (0.06 inch).
- 2 541-2342 Shim Plate Thickness of one shim is 1.0 mm (0.04 inch).
- 2 541-2343 Shim Plate Thickness of one shim is 1.5 mm (0.06 inch).