BGQMH00 Lafayette 3606 Engine Caterpillar parts
G3606B
Rating:
Alternative (cross code) number:
CABGQMH00
BGQ-MH00
BGQMH00
CABGQMH00
BGQ-MH00
BGQMH00
GAS ENGINE,
Compatible equipment models: BGQMH00:
For full view, you need register
Information:
Pairing Devices
Note: The "Display" and "Antenna" come paired out of the box. If a wireless communication is not established, proceed to pair the devices.Note: The version 1 antenna cannot be paired with version 2 display. The version 1 display also cannot be paired with version 2 antenna.Determine which Antenna and display are being used.
Illustration 1 g06276227
Antenna Version 1
Illustration 2 g06276229
Antenna Version 2
To determine which antenna version you have, refer to the model number. The antenna model number for version 1 is SLAU-279MR. Refer to Illustration 1. The antenna model number for version 2 is SLAU-270NB. Refer to Illustration 2.
Illustration 3 g06276235
Display Version 1
Illustration 4 g06276211
Display Version 2
To determine which display version you have, refer to the FCC ID. The FCC ID for display version 1 is W7Z-ZIC2410P3. Refer to Illustration 3. The FCC ID for display version 2 is U90-SM220. Refer to Illustration 4.The antenna and indicator nodes must be paired with each other to establish a wireless link between the two devices. Rapid-Pair allows devices to be paired by connecting devices that are intended to communicate with each other. Nodes that can be paired together are displayed in the main node display area. The user can pair the nodes together as required when in the main display area.
Illustration 5 g06105388
Pairing the antenna and display units
Use the following steps when pairing nodes:
Right-click one of the two nodes desired to be paired.Note: A green circle will appear around the node when selected properly. Another dashed green circle will appear around any acceptable node that can be paired with the selected node.
Drag and release the right mouse button over an acceptable target node to pair the two nodes.Note: An indicator node cannot be paired with another indicator node. Similarly, an antenna node cannot be paired with another antenna node.
A red line and a green line will appear between two units after the units have been paired. These lines indicate that the two units are now paired with each other in the Rapid-Pair software.
Illustration 6 g06105396
Select the "Update" button to apply the new pairing settings to the nodes. The "Update" button in the Rapid-Pair toolbar will become active once the procedure has been performed. A dialog box will appear once the update has completed to confirm that the settings have been applied successfully.Note: The antenna and indicator unit will be automatically rebooted by Rapid-Pair to apply the pairing change.Nodes already properly paired together when found by Rapid-Pair appear with the green and red lines between the two nodes. Units not paired with another node appear with no connecting lines.Only the red line or the green line will be present between two nodes if only one device has been paired with the other. If this situation occurs, do either of the following:
Unpair the device paired to the other non-paired node. Use the pairing procedure to pair the desired nodes.
Pair the node that is not currently connected using the pairing procedure.Note: When antenna and display units are paired successfully, the indicator LED on the display unit will turn from
Note: The "Display" and "Antenna" come paired out of the box. If a wireless communication is not established, proceed to pair the devices.Note: The version 1 antenna cannot be paired with version 2 display. The version 1 display also cannot be paired with version 2 antenna.Determine which Antenna and display are being used.
Illustration 1 g06276227
Antenna Version 1
Illustration 2 g06276229
Antenna Version 2
To determine which antenna version you have, refer to the model number. The antenna model number for version 1 is SLAU-279MR. Refer to Illustration 1. The antenna model number for version 2 is SLAU-270NB. Refer to Illustration 2.
Illustration 3 g06276235
Display Version 1
Illustration 4 g06276211
Display Version 2
To determine which display version you have, refer to the FCC ID. The FCC ID for display version 1 is W7Z-ZIC2410P3. Refer to Illustration 3. The FCC ID for display version 2 is U90-SM220. Refer to Illustration 4.The antenna and indicator nodes must be paired with each other to establish a wireless link between the two devices. Rapid-Pair allows devices to be paired by connecting devices that are intended to communicate with each other. Nodes that can be paired together are displayed in the main node display area. The user can pair the nodes together as required when in the main display area.
Illustration 5 g06105388
Pairing the antenna and display units
Use the following steps when pairing nodes:
Right-click one of the two nodes desired to be paired.Note: A green circle will appear around the node when selected properly. Another dashed green circle will appear around any acceptable node that can be paired with the selected node.
Drag and release the right mouse button over an acceptable target node to pair the two nodes.Note: An indicator node cannot be paired with another indicator node. Similarly, an antenna node cannot be paired with another antenna node.
A red line and a green line will appear between two units after the units have been paired. These lines indicate that the two units are now paired with each other in the Rapid-Pair software.
Illustration 6 g06105396
Select the "Update" button to apply the new pairing settings to the nodes. The "Update" button in the Rapid-Pair toolbar will become active once the procedure has been performed. A dialog box will appear once the update has completed to confirm that the settings have been applied successfully.Note: The antenna and indicator unit will be automatically rebooted by Rapid-Pair to apply the pairing change.Nodes already properly paired together when found by Rapid-Pair appear with the green and red lines between the two nodes. Units not paired with another node appear with no connecting lines.Only the red line or the green line will be present between two nodes if only one device has been paired with the other. If this situation occurs, do either of the following:
Unpair the device paired to the other non-paired node. Use the pairing procedure to pair the desired nodes.
Pair the node that is not currently connected using the pairing procedure.Note: When antenna and display units are paired successfully, the indicator LED on the display unit will turn from