Lafayette 3606 Engine BGTRL00 - Caterpillar

Illustration 2 g06327701
Overview of the 552-5468 Front Lines Gp
Installation Procedure
Illustration 3 g06327707
Front side of manifold
(1) 8T-4182 Bolt
(2) 8T-4196 Bolt
(4) 1P-3702 Rectangular Seal
(5) 1P-4578 Half Flange
(7) 8T-9403 Half Flange, port "AR5"
(12) 552-7479 Block
(13) 552-7480 Block
(14) 552-7481 Support
(15) 552-7482 Support
(16) 552-7483 Hose As.
(18) 8T-4121 Hard Washer
(19) 8T-4136 Bolt
(20) 8T-4223 Hard Washer
(21) 8T-4956 Bolt
(22) 8T-7934 Hard Washer
(23) 1P-3703 Rectangular Seal
(24) 7Y-6007 Cover
Install support assemblies (14) and (15) as shown. Install components as shown.Note: Components (25), (27), (29), (30), and (32) are used for "Manufacturing Purposes Only"
Illustration 4 g06308288
(2) 8T-4196 Bolt
(4) 1P-3702 Rectangular Seal
(5) 1P-4578 Half Flange
(10) 4J-0522 O-Ring Seal
(11) 519-8289 Pipe AsO-Ring Seal, Connect to Cooler Lines Gp.
(13) 552-7480 Block
(14) 552-7481 Support
(15) 552-7482 Support
(16) 552-7483 Hose As.
(17) 552-7486 Hose As.
(18) 8T-4121 Hard Washer
(19) 8T-4136 Bolt
(20) 8T-4223 Hard Washer
(21) 8T-4956 Bolt
Install hoses as shown.
Illustration 5 g06308290
(3) 512-7854 Support
(6) 7Y-5237 U-Bolt
(8) 096-4883 Locknut, 22 3 N m (195 27 lb inch)
(9) 101-7404 Bolt
(10) 4J-0522 O-Ring Seal
(11) 519-8289 Pipe AsO-Ring Seal, Connect to Cooler Lines Gp.
(17) 552-7486 Hose As.
(18) 8T-4121 Hard Washer
(19) 8T-4136 BoltNote: Tighten locknut (8) to 22 3 N m (195 27 lb in).
Install hoses as shown.
Unless specified, tighten all fittings and hardware to standard torque.
Illustration 6 g00687600
Check for leaks.