HYDRAULIC SYSTEM
FILTER GPHYDRAULIC GP
LINES GP-HYDRAULIC
HYDRAULIC SYSTEM
FILTER GP
#M00701180730
295-6259: FILTER GP-OIL
For full view, you need register
Parts for your 854K WHEEL DOZER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 295-6257 J | [1] | FILTER ELEMENT AS-OIL | |
| 2. | 295-6258 J | [1] | HOUSING-FILTER (INCLUDES SEAL KIT) | |
| 3. | 490-0662 | [1] | INDICATOR AS-PRESSURE (FILTER BYPASS) | |
| 451-2763 | [1] | SEAL | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 4. | 369-7506 J | [1] | KIT-FILTER SEAL | |
| (INCLUDES O-RING SEAL & BACKUP RING) | ||||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
#M00701180731
487-9660: FILTER GP-OIL
For full view, you need register
Parts for your 854K WHEEL DOZER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3J-1907 | [1] | SEAL-O-RING | |
| 2. | 5F-9144 | [1] | SEAL-O-RING | |
| 3. | 393-5112 | [1] | SWITCH AS-DIFF PRESSURE (HYDRAULIC FILTER BYPASS) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-1813 E | SLEEVE (14-CM) | |||
| 4. | 465-8903 | [1] | FILTER AS-OIL (ULTRA HIGH EFFICIENCY)(HYDRAULIC) | |
| E | ORDER BY THE CENTIMETER | |||
#M00701180732
329-3316: HYDRAULIC AR
329-3316 HYDRAULIC AR -SECONDARY STEERING
S/N KK31-UP
S/N KK31-UP
For full view, you need register
Parts for your 854K WHEEL DOZER:
CATERPILLAR SIS#M00701180733
483-9041: HYDRAULIC AR
For full view, you need register
Parts for your 854K WHEEL DOZER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| Y | [1] | CONTROL GP-SERVICE BRAKE | ||
| 343-2962 Y | [1] | COOLER & MTG GP-AXLE OIL | ||
| 283-4412 Y | [1] | CYLINDER & MTG GP-LIFT | ||
| 283-4409 Y | [1] | CYLINDER & MTG GP-STEERING | ||
| 346-3745 Y | [1] | FILTER & LINES GP-CASE DRAIN | ||
| 345-0300 Y | [1] | LINES GP-AUTOMATIC LUBRICATION (REAR FRAME) | ||
| 345-0320 Y | [1] | LINES GP-AUTOMATIC LUBRICATION (LOADER FRAME) | ||
| 343-4985 Y | [1] | LINES GP-AXLE OIL COOLER | ||
| 483-9033 Y | [1] | LINES GP-HYDRAULIC FAN | ||
| 347-8710 Y | [1] | LINES GP-HYDRAULIC OIL COOLER | ||
| 343-4980 Y | [1] | LINES GP-LIFT CYLINDER | ||
| 336-8960 Y | [1] | LINES GP-PILOT | ||
| 345-8130 Y | [1] | LINES GP-PILOT | ||
| 326-5173 Y | [1] | LINES GP-SECONDARY STEERING | ||
| 343-4990 Y | [1] | LINES GP-SERVICE BRAKE | ||
| 329-3300 Y | [1] | LINES GP-STEERING | ||
| 346-0990 Y | [1] | LINES GP-STEERING | ||
| 329-3298 Y | [1] | LINES GP-STEERING NEUTRALIZER | ||
| Y | [1] | LINES GP-STEERING OIL COOLER | ||
| 343-4975 Y | [1] | LINES GP-TILT & TIP CYLINDER | ||
| 273-6265 Y | [1] | MOTOR & MTG GP-HYDRAULIC FAN | ||
| 351-4880 Y | [1] | PUMP & MTG GP-AXLE OIL COOLER | ||
| 274-2350 Y | [1] | PUMP & MTG GP-BRAKE | ||
| 273-6270 Y | [1] | PUMP & MTG GP-HYDRAULIC FAN | ||
| 291-2666 Y | [1] | PUMP & MTG GP-IMPLEMENT | ||
| 285-3328 Y | [1] | PUMP & MTG GP-SECONDARY STEER | ||
| 394-2840 Y | [1] | PUMP & MTG GP-STEERING | ||
| 343-5685 Y | [1] | TANK & MTG GP-HYDRAULIC | ||
| 343-5686 Y | [1] | TANK & MTG GP-HYDRAULIC | ||
| 345-9835 Y | [1] | VALVE & MTG GP-MAIN CONTROL | ||
| 288-7140 Y | [1] | VALVE & MTG GP-STEERING (SECONDARY) | ||
| Y | SEPARATE ILLUSTRATION | |||
#M00701180734
483-9044: HYDRAULIC AR
483-9044 HYDRAULIC AR
S/N KK31-UP
SECONDARY STEERING, DELUXE FILTRATION
PART OF 514-9685 DISTRIBUTION AR, 519-1356 OPTION AR-MACHINE
S/N KK31-UP
SECONDARY STEERING, DELUXE FILTRATION
PART OF 514-9685 DISTRIBUTION AR, 519-1356 OPTION AR-MACHINE
For full view, you need register
#M00701180735
364-6470: LINES GP-HYDRAULIC
For full view, you need register
Parts for your 854K WHEEL DOZER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5I-4376 | [1] | FITTING | |
| 2. | 6E-6550 | [1] | GAUGE AS-LIQUID LEVEL | |
| 8F-3469 | [4] | SEAL-O-RING | ||
| 121-7958 | [2] | BOLT-MOUNTING (1/2-20X1.75-IN) | ||
| 3. | 112-1817 C | [1] | VALVE-BALL | |
| 4. | 124-0689 | [2] | ADAPTER | |
| 5. | 203-7959 | [1] | ADAPTER-PIPE | |
| 6. | 250-1417 C | [1] | ELBOW AS | |
| 3J-1907 | [1] | SEAL-O-RING | ||
| 6V-8397 | [2] | SEAL-O-RING | ||
| 250-1416 | [1] | ELBOW | ||
| 7. | 364-6469 I | [2] | HOSE AS | |
| 8. | 395-1141 | [1] | VALVE GP-RELIEF | |
| 395-1140 J | [1] | VALVE GP-RELIEF | ||
| 9. | 439-2488 C | [1] | TUBE AS | |
| 10. | 439-2493 C | [1] | TUBE AS | |
| 11. | 439-2498 C | [1] | TUBE AS | |
| 12. | 439-2499 C | [1] | TUBE AS | |
| 13. | 442-8923 C | [1] | PLATE AS | |
| 14. | 453-7251 C | [1] | TUBE AS | |
| 15. | 453-7267 CI | [1] | HOSE AS | |
| 16. | 453-8568 C | [1] | TUBE AS | |
| 17. | 453-9361 CI | [1] | HOSE AS | |
| 18. | 459-5748 C | [1] | TUBE AS | |
| 19. | 462-2049 C | [1] | TUBE AS | |
| 20. | 039-8557 C | [8] | WASHER (13X26X6-MM THK) | |
| 21. | 148-8336 | [1] | CONNECTOR AS | |
| 3J-1907 | [1] | SEAL-O-RING | ||
| 6V-8397 | [1] | SEAL-O-RING | ||
| 6V-8636 | [1] | CONNECTOR | ||
| 22. | 148-8365 | [1] | ELBOW AS | |
| 3J-1907 | [1] | SEAL-O-RING | ||
| 6V-8398 | [1] | SEAL-O-RING | ||
| 8T-6876 | [1] | ELBOW | ||
| 23. | 148-8367 | [2] | ELBOW AS | |
| (EACH INCLUDES) | ||||
| 6V-8397 | [1] | SEAL-O-RING | ||
| 6V-9850 | [1] | ELBOW | ||
| 24. | 148-8377 | [1] | ELBOW AS | |
| 6V-8397 | [2] | SEAL-O-RING | ||
| 6V-8980 | [1] | ELBOW | ||
| 25. | 148-8378 | [3] | ELBOW AS | |
| (EACH INCLUDES) | ||||
| 3J-1907 | [1] | SEAL-O-RING | ||
| 6V-8397 | [1] | SEAL-O-RING | ||
| 6V-8724 | [1] | ELBOW | ||
| 26. | 148-8387 | [1] | ELBOW AS | |
| 6V-8400 | [1] | SEAL-O-RING | ||
| 6V-9855 | [1] | ELBOW | ||
| 27. | 148-8412 | [1] | REDUCER AS | |
| 6V-8398 | [1] | SEAL-O-RING | ||
| 6V-8944 | [1] | REDUCER | ||
| 28. | 148-8435 C | [2] | TEE AS | |
| (EACH INCLUDES) | ||||
| 3J-1907 | [1] | SEAL-O-RING | ||
| 6V-8397 | [2] | SEAL-O-RING | ||
| 6V-8781 | [1] | TEE | ||
| 29. | 150-3074 C | [1] | ORIFICE AS | |
| 3J-1907 | [1] | SEAL-O-RING | ||
| 6V-8397 | [1] | SEAL-O-RING | ||
| 110-5266 | [1] | ORIFICE (1.6-MM) | ||
| 30. | 153-6246 | [1] | TEE AS | |
| 6V-8397 | [3] | SEAL-O-RING | ||
| 7X-0820 | [1] | TEE | ||
| 31. | 216-9199 | [1] | UNION AS | |
| 5K-9090 | [1] | SEAL-O-RING | ||
| 6V-8400 | [1] | SEAL-O-RING | ||
| 9X-2317 | [1] | UNION | ||
| 32. | 222-7344 C | [1] | PIN | |
| 33. | 397-9301 C | [1] | WASHER-HARD (11.5X20X15-MM THK) | |
| 34. | 336-7048 | [1] | PIN | |
| 35. | 369-1052 L | [1] | CYLINDER GP-HYDRAULIC | |
| 37. | 4L-6943 | [4] | RING-RETAINING | |
| 38. | 5P-9297 C | [1] | CLIP (LOOP) | |
| 39. | 6V-8397 C | [5] | SEAL-O-RING | |
| 40. | 6V-9168 | [4] | NUT (11/16-16-THD) | |
| 41. | 6V-9172 | [1] | NUT (1-7/16-12-THD) | |
| 42. | 6V-9834 | [1] | CAP | |
| 43. | 7Y-3173 CM | [4] | SCREW-BUTTON HEAD (M4X0.7X12-MM) | |
| 44. | 8T-4121 C | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 45. | 8T-4183 CM | [8] | BOLT (M12X1.75X40-MM) | |
| 46. | 8T-4196 CM | [1] | BOLT (M10X1.5X35-MM) | |
| 47. | 7X-2534 CM | [2] | BOLT (M6X1X50-MM) | |
| 48. | 9X-6579 | [1] | NUT-ORIFICE (7/16-12-THD) | |
| 49. | 9X-8256 C | [6] | WASHER (6.6X12X2-MM THK) | |
| AVAILABLE REPAIR KIT(S): | ||||
| 120-9047 J | [1] | KIT-SEAL | ||
| 484-5528 L | [1] | KIT-SEAL (HYDRAULIC CYLINDER) | ||
| (INCLUDES WEAR RINGS, PISTON SEAL, O-RING SEALS, BACKUP RING, ROD SEAL & WIPER SEAL) | ||||
| C | CHANGE FROM PREVIOUS TYPE | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
| L | KIT MARKED L SERVICES PART(S) MARKED L | |||
| M | METRIC PART | |||
#M00701180736
490-5573: LINES GP-HYDRAULIC
For full view, you need register
Parts for your 854K WHEEL DOZER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5H-4744 | [2] | SPACER (13.5X25X11-MM THK) | |
| 2. | 7X-3391 | [12] | WASHER-HARD (13.5X32X6-MM THK) | |
| 3. | 143-7861 I | [1] | HOSE AS | |
| 4. | 288-5769 Y | [1] | SCREEN GP-HIGH PRESSURE | |
| 5. | 425-7143 I | [1] | HOSE AS | |
| 6. | 348-5995 I | [1] | HOSE AS | |
| 7. | 369-6861 | [1] | PLUG AS | |
| 360-3682 | [1] | PLUG-O-RING | ||
| 3D-2824 | [1] | SEAL-O-RING | ||
| 8. | 419-0859 | [1] | SCREEN GP-HYDRAULIC (OIL) | |
| 396-9124 | [1] | FILTER (SCREEN) | ||
| 376-8222 | [1] | HOUSING AS-OIL FILTER | ||
| 365-2295 | [1] | KIT-O-RING | ||
| 155-9644 | [1] | SEAL | ||
| 367-5991 | [1] | PLUG-PORT | ||
| 9. | 425-7138 | [1] | PLATE | |
| 10. | 425-7139 | [1] | MANIFOLD | |
| 11. | 425-7150 I | [1] | HOSE AS | |
| 12. | 425-7152 I | [1] | HOSE AS | |
| 13. | 425-7153 I | [1] | HOSE AS | |
| 14. | 425-7154 | [1] | HOSE AS | |
| 15. | 483-9046 | [1] | BRACKET AS | |
| 16. | 490-5513 | [1] | BRACKET AS | |
| 17. | 099-0169 M | [8] | BOLT (M16X2X55-MM) | |
| 18. | 9X-6380 | [2] | BOLT (5/8-11X1.5-IN) | |
| 19. | 148-8335 | [1] | CONNECTOR AS | |
| 6V-8635 | [1] | CONNECTOR | ||
| 5K-9090 | [1] | SEAL-O-RING | ||
| 7M-8485 | [1] | SEAL-O-RING | ||
| 20. | 148-8339 | [1] | CONNECTOR AS | |
| 6V-8716 | [1] | CONNECTOR (STRAIGHT) | ||
| 6V-9746 | [1] | SEAL-O-RING | ||
| 7M-8485 | [1] | SEAL-O-RING | ||
| 21. | 1P-3704 | [3] | SEAL-RECTANGULAR | |
| 22. | 1P-3705 | [4] | SEAL-RECTANGULAR | |
| 23. | 1P-4582 | [2] | FLANGE-HALF | |
| 24. | 1P-4584 | [6] | FLANGE-HALF | |
| 25. | 1P-5767 | [4] | FLANGE-HALF | |
| 26. | 4J-0520 | [1] | SEAL-O-RING | |
| 27. | 4J-0522 | [1] | SEAL-O-RING | |
| 28. | 4J-0527 | [1] | SEAL-O-RING | |
| 29. | 5P-8077 | [4] | FLANGE-HALF | |
| 30. | 5P-8247 | [2] | WASHER-HARD (17X32X3.5-MM THK) | |
| 31. | 6J-2680 | [4] | SEAL-O-RING | |
| 32. | 8T-4139 M | [4] | BOLT (M12X1.75X30-MM) | |
| 33. | 8T-4183 M | [4] | BOLT (M12X1.75X40-MM) | |
| 34. | 8T-4184 M | [14] | BOLT (M12X1.75X45-MM) | |
| 35. | 8T-4192 M | [2] | BOLT (M12X1.75X25-MM) | |
| 36. | 8T-4194 M | [8] | BOLT (M12X1.75X50-MM) | |
| 37. | 8T-4223 | [22] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 38. | 8T-4956 M | [8] | BOLT (M12X1.75X35-MM) | |
| 39. | 8T-7971 | [8] | WASHER-HARD (13.5X25.5X5-MM THK) | |
| 40. | 8T-8919 | [4] | BOLT (1/2-13X1.75-IN) | |
| 41. | 9X-8257 | [8] | WASHER (17.5X30X3.5-MM THK) | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#M00701180737
490-5575: LINES GP-HYDRAULIC
For full view, you need register
Parts for your 854K WHEEL DOZER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5H-4744 | [2] | SPACER (13.5X25X11-MM THK) | |
| 2. | 143-7861 I | [1] | HOSE AS | |
| 3. | 288-8846 | [1] | BRACKET AS | |
| 4. | 288-8861 I | [1] | HOSE AS | |
| 5. | 288-8864 I | [1] | HOSE AS | |
| 6. | 291-2636 I | [1] | HOSE AS | |
| 7. | 369-6861 | [1] | PLUG AS | |
| 3D-2824 | [1] | SEAL-O-RING | ||
| 360-3682 | [1] | PLUG-O-RING | ||
| 8. | 376-2105 I | [1] | HOSE AS | |
| 9. | 425-7138 | [1] | PLATE | |
| 10. | 425-7139 | [1] | MANIFOLD | |
| 11. | 425-7143 I | [1] | HOSE AS | |
| 12. | 425-7150 I | [1] | HOSE AS | |
| 13. | 099-0169 M | [8] | BOLT (M16X2X55-MM) | |
| 14. | 9X-6380 | [2] | BOLT (5/8-11X1.5-IN) | |
| 15. | 148-8335 | [1] | CONNECTOR AS | |
| 5K-9090 | [1] | SEAL-O-RING | ||
| 6V-8635 | [1] | CONNECTOR | ||
| 7M-8485 | [1] | SEAL-O-RING | ||
| 16. | 148-8339 | [1] | CONNECTOR AS | |
| 6V-8716 | [1] | CONNECTOR (STRAIGHT) | ||
| 6V-9746 | [1] | SEAL-O-RING | ||
| 7M-8485 | [1] | SEAL-O-RING | ||
| 17. | 1P-3705 | [4] | SEAL-RECTANGULAR | |
| 18. | 1P-4582 | [2] | FLANGE-HALF | |
| 19. | 1P-4584 | [6] | FLANGE-HALF | |
| 20. | 4J-0520 | [3] | SEAL-O-RING | |
| 21. | 4J-0522 | [1] | SEAL-O-RING | |
| 22. | 4J-0527 | [1] | SEAL-O-RING | |
| 23. | 5P-1076 | [4] | WASHER-HARD (13.5X30X4-MM THK) | |
| 24. | 5P-8077 | [4] | FLANGE-HALF | |
| 25. | 5P-8247 | [2] | WASHER-HARD (17X32X3.5-MM THK) | |
| 26. | 6J-2680 | [3] | SEAL-O-RING | |
| 27. | 8C-3206 | [4] | FLANGE-HALF | |
| 28. | 8T-4121 | [8] | WASHER-HARD (11X21X2.5-MM THK) | |
| 29. | 8T-4183 M | [4] | BOLT (M12X1.75X40-MM) | |
| 30. | 8T-4184 M | [14] | BOLT (M12X1.75X45-MM) | |
| 31. | 8T-4196 M | [8] | BOLT (M10X1.5X35-MM) | |
| 32. | 8T-4223 | [12] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 33. | 8T-4956 M | [4] | BOLT (M12X1.75X35-MM) | |
| 34. | 8T-7971 | [8] | WASHER-HARD (13.5X25.5X5-MM THK) | |
| 35. | 8T-8919 | [4] | BOLT (1/2-13X1.75-IN) | |
| 36. | 9X-8257 | [8] | WASHER (17.5X30X3.5-MM THK) | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
#M00701180738
268-8165: LINES GP-HYDRAULIC FAN
268-8165 LINES GP-HYDRAULIC FAN -STANDARD FILTRATION
S/N KK31-UP
PART OF 329-3316 HYDRAULIC AR
S/N KK31-UP
PART OF 329-3316 HYDRAULIC AR
For full view, you need register
Parts for your 854K WHEEL DOZER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 314-7651 I | [1] | HOSE AS | |
| 2. | 314-7652 I | [1] | HOSE AS | |
| 3. | 285-3789 | [1] | PLATE AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 8T-3597 M | [2] | NUT-WELD (M12X1.75-THD) | ||
| 5. | 4J-0522 | [4] | SEAL-O-RING | |
| 6. | 5P-7470 | [1] | CLIP (SLOT) | |
| 7. | 5P-7471 | [1] | CLIP (TAB) | |
| 8. | 5P-8182 | [1] | GROMMET (46-MM ID) | |
| 9. | 8T-4139 M | [1] | BOLT (M12X1.75X30-MM) | |
| 10. | 8T-4223 | [6] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 11. | 197-3295 | [4] | FLANGE-HALF | |
| 12. | 6V-1572 | [1] | CLIP (SLOT) | |
| 13. | 6V-1573 | [1] | CLIP (TAB) | |
| 14. | 6V-1875 | [1] | GROMMET | |
| 15. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 16. | 8T-4194 M | [4] | BOLT (M12X1.75X50-MM) | |
| 17. | 8T-4196 M | [1] | BOLT (M10X1.5X35-MM) | |
| 18. | 8T-4956 M | [9] | BOLT (M12X1.75X35-MM) | |
| 19. | 7X-3392 | [8] | WASHER-HARD (13.5X22.5X3-MM THK) | |
| 20. | 313-5844 | [2] | PLATE | |
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
#M00701180739
381-4161: LINES GP-HYDRAULIC FAN
For full view, you need register
Parts for your 854K WHEEL DOZER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6V-0852 | [3] | CAP-DUST | |
| 2. | 8C-3451 | [1] | CAP-DUST (HYDRAULIC OIL) | |
| 3. | 136-9699 C | [1] | BRACKET AS | |
| 4. | 8X-9391 | [1] | BRACKET AS | |
| 5. | 101-1790 | [1] | ADAPTER AS | |
| 6V-9746 | [1] | SEAL-O-RING | ||
| 9X-6643 | [1] | ADAPTER | ||
| 6. | 118-9901 | [2] | SPACER (12X20X10-MM THK) | |
| 7. | 122-5855 | [2] | SPACER (11.5X20X26-MM THK) | |
| 8. | 138-1916 | [1] | TEE-BULKHEAD | |
| 9. | 148-8443 | [2] | TEE AS | |
| (EACH INCLUDES) | ||||
| 3J-1907 | [1] | SEAL-O-RING | ||
| 6V-8397 | [1] | SEAL-O-RING | ||
| 7X-2459 | [1] | ADAPTER-TEE | ||
| 10. | 164-5567 | [3] | COUPLER AS-QUICK DISCONNECT (MALE) | |
| (EACH INCLUDES) | ||||
| 6V-3965 | [1] | FITTING (QUICK DISCONNECT) | ||
| 214-7568 | [1] | SEAL-O-RING | ||
| 11. | 166-4647 Y | [1] | FILTER GP-OIL (HYDRAULIC FAN) | |
| 12. | 168-6827 I | [1] | HOSE AS | |
| 13. | 172-5277 | [1] | TEE AS | |
| 3D-2824 | [1] | SEAL-O-RING | ||
| 6V-9746 | [1] | SEAL-O-RING | ||
| 8T-8901 | [1] | TEE-O-RING PORT | ||
| 14. | 180-9616 | [1] | SPACER | |
| 15. | 191-8735 Y | [1] | VALVE GP-DEMAND FAN | |
| 16. | 196-2036 | [1] | TEE AS | |
| 3K-0360 | [1] | SEAL-O-RING | ||
| 6V-8398 | [1] | SEAL-O-RING | ||
| 9X-2492 | [1] | TEE-O-RING | ||
| 17. | 245-7576 | [1] | ADAPTER | |
| 18. | 251-6180 I | [1] | HOSE AS | |
| 19. | 280-3444 Y | [1] | FILTER GP-OIL (HYDRAULIC FAN) | |
| 20. | 286-0906 | [1] | ADAPTER | |
| 21. | 307-9953 | [1] | BRACKET AS | |
| 22. | 313-5838 I | [1] | HOSE AS | |
| 23. | 313-5841 I | [1] | HOSE AS | |
| 24. | 313-5843 | [1] | TUBE AS | |
| 25. | 316-6089 | [1] | BRACKET AS | |
| 26. | 317-6512 | [1] | PLATE AS | |
| 27. | 343-6264 | [1] | MANIFOLD | |
| 28. | 346-3769 | [1] | PLATE | |
| 29. | 346-5308 I | [1] | HOSE AS | |
| 30. | 346-5309 I | [1] | HOSE AS | |
| 31. | 346-5311 I | [1] | HOSE AS | |
| 32. | 346-5312 I | [1] | HOSE AS | |
| 33. | 346-5313 | [1] | BRACKET AS | |
| 34. | 348-5986 | [1] | TUBE AS | |
| 35. | 348-6032 I | [1] | HOSE AS | |
| 36. | 348-6035 I | [1] | HOSE AS | |
| 37. | 348-6043 | [1] | TUBE AS | |
| 38. | 348-6044 | [1] | TUBE AS | |
| 39. | 348-6047 | [1] | TUBE AS | |
| 40. | 348-6050 I | [1] | HOSE AS | |
| 41. | 353-2313 | [1] | VALVE GP-CHECK | |
| 5K-9090 | [1] | SEAL-O-RING | ||
| 7M-8485 | [1] | SEAL-O-RING | ||
| 42. | 361-4041 | [1] | TUBE AS | |
| 43. | 367-5982 | [1] | TEE AS | |
| 6V-8400 | [1] | SEAL-O-RING | ||
| 7M-8485 | [1] | SEAL-O-RING | ||
| 297-7920 | [1] | TEE | ||
| 44. | 370-1480 | [1] | GROMMET | |
| 45. | 375-2456 I | [1] | HOSE AS | |
| 46. | 375-3626 | [1] | TUBE AS | |
| 47. | 376-3904 | [1] | PLATE | |
| 48. | 433-2161 C | [1] | TUBE AS | |
| 49. | 433-2154 C | [1] | TUBE AS | |
| 50. | 433-2155 C | [1] | TUBE AS | |
| 51. | 376-8042 I | [1] | HOSE AS | |
| 52. | 379-9671 I | [1] | HOSE AS | |
| 53. | 381-4162 | [1] | PLATE | |
| 54. | 081-6344 | [2] | SPACER (13.3X21.3X25-MM THK) | |
| 55. | 148-8309 | [1] | ADAPTER AS | |
| 2P-8421 | [1] | ADAPTER-O-RING | ||
| 3D-2824 | [1] | SEAL-O-RING | ||
| 56. | 148-8333 | [1] | CONNECTOR AS | |
| 6V-8400 | [1] | SEAL-O-RING | ||
| 7M-8485 | [1] | SEAL-O-RING | ||
| 8T-7927 | [1] | CONNECTOR | ||
| 57. | 148-8352 | [1] | ELBOW AS | |
| 5K-9090 | [1] | SEAL-O-RING | ||
| 6V-9854 | [1] | ELBOW (SWIVEL) | ||
| 58. | 148-8355 | [1] | ELBOW AS | |
| 5K-9090 | [1] | SEAL-O-RING | ||
| 6V-9005 | [1] | ELBOW | ||
| 7M-8485 | [1] | SEAL-O-RING | ||
| 59. | 148-8357 | [1] | ELBOW AS | |
| 5K-9090 | [1] | SEAL-O-RING | ||
| 6V-9008 | [1] | ELBOW | ||
| 7M-8485 | [1] | SEAL-O-RING | ||
| 60. | 148-8367 | [2] | ELBOW AS | |
| (EACH INCLUDES) | ||||
| 6V-8397 | [1] | SEAL-O-RING | ||
| 6V-9850 | [1] | ELBOW | ||
| 61. | 148-8376 | [1] | ELBOW AS | |
| 6V-8983 | [1] | ELBOW | ||
| 6V-9746 | [2] | SEAL-O-RING | ||
| 62. | 148-8378 | [1] | ELBOW AS | |
| 3J-1907 | [1] | SEAL-O-RING | ||
| 6V-8397 | [1] | SEAL-O-RING | ||
| 6V-8724 | [1] | ELBOW | ||
| 63. | 148-8387 | [1] | ELBOW AS | |
| 6V-8400 | [1] | SEAL-O-RING | ||
| 6V-9855 | [1] | ELBOW | ||
| 64. | 148-8417 | [1] | REDUCER AS | |
| 6V-8397 | [1] | SEAL-O-RING | ||
| 6V-8941 | [1] | REDUCER | ||
| 65. | 148-8422 | [1] | TEE AS | |
| 5K-9090 | [1] | SEAL-O-RING | ||
| 6V-9746 | [1] | SEAL-O-RING | ||
| 7M-8485 | [1] | SEAL-O-RING | ||
| 8T-6356 | [1] | TEE-O-RING PORT | ||
| 66. | 148-8444 | [1] | TEE AS-SWIVEL | |
| 6V-8398 | [2] | SEAL-O-RING | ||
| 6V-9837 | [1] | TEE-SWIVEL | ||
| 67. | 148-8453 | [1] | TEE AS | |
| 5K-9090 | [1] | SEAL-O-RING | ||
| 6V-8400 | [2] | SEAL-O-RING | ||
| 8T-5907 | [1] | TEE-UNION | ||
| 68. | 155-3624 | [1] | PLUG AS | |
| 3J-7354 | [1] | SEAL-O-RING | ||
| 9S-4182 | [1] | PLUG (7/16-20-THD) | ||
| 69. | 164-5590 | [1] | VALVE AS-FLUID SAMPLING | |
| 3J-7354 | [1] | SEAL-O-RING | ||
| 8C-3446 | [1] | VALVE-SAMPLING | ||
| 70. | 165-4931 | [1] | ELBOW AS | |
| 3J-1907 | [1] | SEAL-O-RING | ||
| 6V-8077 | [1] | ELBOW | ||
| 71. | 1P-3704 | [4] | SEAL-RECTANGULAR | |
| 72. | 1P-3705 | [3] | SEAL-RECTANGULAR | |
| 73. | 1P-4578 | [4] | FLANGE-HALF | |
| 74. | 1P-4579 | [4] | FLANGE-HALF | |
| 75. | 1P-4584 | [4] | FLANGE-HALF | |
| 76. | 1P-5767 | [8] | FLANGE-HALF | |
| 77. | 287-7341 | [1] | ELBOW AS | |
| 3J-7354 | [1] | SEAL-O-RING | ||
| 124-8909 | [1] | ELBOW | ||
| 78. | 2H-9766 | [2] | CLIP | |
| 79. | 2P-1293 | [2] | LOCKNUT (1-3/16-12-THD) | |
| 80. | 375-3192 | [1] | CLIP (TAB) | |
| 81. | 375-3193 | [1] | CLIP (SLOT) | |
| 82. | 4J-0522 | [3] | SEAL-O-RING | |
| 83. | 4J-0524 | [2] | SEAL-O-RING | |
| 84. | 5K-9090 | [1] | SEAL-O-RING | |
| 85. | 5P-1076 | [2] | WASHER-HARD (13.5X30X4-MM THK) | |
| 86. | 5P-2424 | [4] | BOLT (1/2-13X2.25-IN) | |
| 87. | 5P-7466 | [5] | CLIP (SLOT) | |
| 88. | 5P-7467 | [5] | CLIP (TAB) | |
| 89. | 5P-7468 | [1] | CLIP (SLOT) | |
| 90. | 5P-7469 | [1] | CLIP (TAB) | |
| 91. | 5P-7470 | [3] | CLIP (SLOT) | |
| 92. | 5P-7471 | [3] | CLIP (TAB) | |
| 93. | 5P-8112 | [5] | GROMMET | |
| 94. | 5P-8182 | [3] | GROMMET (46-MM ID) | |
| 95. | 5R-0939 | [2] | CLIP (TAB) | |
| 96. | 5R-0940 | [2] | CLIP (SLOT) | |
| 97. | 6J-2680 | [2] | SEAL-O-RING | |
| 98. | 6V-4349 | [1] | GROMMET | |
| 99. | 6V-8400 | [3] | SEAL-O-RING | |
| 100. | 6V-9746 | [3] | SEAL-O-RING | |
| 101. | 7X-7729 | [5] | WASHER (11X25X3-MM THK) | |
| 102. | 8K-4691 | [4] | CLAMP-HALF | |
| 103. | 8S-0023 | [8] | CLIP (SLOT) | |
| 104. | 8S-0024 | [8] | CLIP (TAB) | |
| 105. | 8T-1889 | [1] | CLIP (SLOT) | |
| 106. | 8T-1890 | [1] | CLIP (TAB) | |
| 107. | 8T-4121 | [22] | WASHER-HARD (11X21X2.5-MM THK) | |
| 108. | 8T-4136 M | [12] | BOLT (M10X1.5X25-MM) | |
| 109. | 8T-4139 M | [11] | BOLT (M12X1.75X30-MM) | |
| 110. | 8T-4176 M | [4] | BOLT (M12X1.75X90-MM) | |
| 111. | 8T-4178 M | [4] | BOLT (M10X1.5X90-MM) | |
| 112. | 8T-4182 M | [1] | BOLT (M10X1.5X45-MM) | |
| 113. | 8T-4183 M | [13] | BOLT (M12X1.75X40-MM) | |
| 114. | 8T-4184 M | [4] | BOLT (M12X1.75X45-MM) | |
| 115. | 8T-4186 M | [4] | BOLT (M10X1.5X40-MM) | |
| 116. | 8T-4194 M | [8] | BOLT (M12X1.75X50-MM) | |
| 117. | 8T-4195 M | [2] | BOLT (M10X1.5X30-MM) | |
| 118. | 8T-4223 | [66] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 119. | 8T-4244 M | [3] | NUT (M12X1.75-THD) | |
| 120. | 8T-4648 M | [1] | BOLT (M12X1.75X70-MM) | |
| 121. | 8T-4835 | [4] | BOLT (1/2-13X2-IN) | |
| 122. | 8T-4910 M | [1] | BOLT (M12X1.75X60-MM) | |
| 123. | 8T-4956 M | [11] | BOLT (M12X1.75X35-MM) | |
| 124. | 8T-6466 M | [4] | BOLT (M10X1.5X60-MM) | |
| 125. | 8T-6868 M | [4] | BOLT (M12X1.75X80-MM) | |
| 126. | 9X-6580 | [1] | NUT (1-3/16-12-THD) | |
| 127. | 2B-0941 C | [1] | SPACER (10.5X19X19-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
HYDRAULIC SYSTEM
FILTER GP
Operation and Maintenance Manual
Special Instruction
Guidelines for the Use of High Efficiency Filters for the Hydraulic Oil System and for the Power Train Oil System {3000, 3004, 5050, 5068}
Guidelines for the Use of High Efficiency Filters for the Hydraulic Oil System and for the Power Train Oil System {3000, 3004, 5050, 5068}
Guidelines for the Use of High Efficiency Filters for the Hydraulic Oil System and for the Power Train Oil System {3000, 3004, 5050, 5068}
Specifications
Systems Operation
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Service Magazine
New Oil Filters for all Cat Machines are Available {3004, 3067, 4295, 431F, 5068}
New Oil Filters for all Cat Machines are Available {3004, 3067, 4295, 431F, 5068}
New Oil Filters for all Cat Machines are Available {3004, 3067, 4295, 431F, 5068}
