PLATE 3727447 - Caterpillar

3727447 PLATE Caterpillar parts 300.9D

Price: query
Add in request price Go to cart

Rating:

Alternative (cross code) number:
CA3727447
372-7447
3727447

Weight: 0.38 pounds 0 kg.

Buy PLATE 3727447 Caterpillar genuine, new aftermarket tractor parts with delivery
MINI HYD EXCAVATOR,

Compatible equipment models: 3727447:

MINI HYD EXCAVATOR 300.9D Caterpillar

Number on catalog scheme: 8

For full view, you need register

Information:

Removal Procedure
Start By:
Remove the front gear group. Refer to Disassembly and Assembly, "Gear Group (Front) - Remove".
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: For information on reusability of the camshaft gear, refer to Guideline For Reusable Parts And Salvage Operations, SEBF8045, "Timing Gears for All Engines".
Place alignment marks on the crankshaft gear and on the crankshaft. The alignment marks will ensure that the camshaft gear is aligned properly during installation.
Illustration 1 g00630476
Heat crankshaft gear (1). Remove crankshaft gear (1) from crankshaft (2). Installation Procedure
Keep all parts clean from contaminants.Contaminants may cause rapid wear and shortened component life.
Note: For information on reusability of the camshaft gear, refer to Guideline For Reusable Parts And Salvage Operations, SEBF8045, "Timing Gears for All Engines".
Illustration 2 g00630476
Heat crankshaft gear (1) to a maximum temperature of 204 °C (400 °F) for no longer than 1 hour for installation.
Align the timing marks on the crankshaft and on crankshaft gear (1). Install crankshaft gear (1) on crankshaft (2). Note: Ensure that crankshaft gear (1) is flush against the shoulder of crankshaft. If the gear is not flush damage to the gear may occur.End By:
Install the front gear group. Refer to Disassembly and Assembly, "Gear Group (Front) - Install".