BGBTG00 Lafayette 3608 Engine Caterpillar parts
3608
Rating:
Alternative (cross code) number:
CABGBTG00
BGB-TG00
BGBTG00
CABGBTG00
BGB-TG00
BGBTG00
MARINE ENGINE,
Compatible equipment models: BGBTG00:
For full view, you need register
Information:
Start By:
Remove the hood.
Remove the fan.
Remove the muffler.
Remove the counterweight.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contamination of the hydraulic system with foreign material will reduce the service life of the hydraulic system components.To prevent contaminants from entering the hydraulic system, always plug or cap the lines, fittings, or hoses as they are disconnected. Cover any disassembled components and clean them properly before assembly.Clean the hydraulic system properly after any major component exchange or especially after a component failure, to remove any contamination.
Illustration 1 g03251544
Turn fuel shutoff valve (1) to the OFF position.
Illustration 2 g03251576
Remove hose assemblies (2). Remove hose assemblies (3). Remove hose (4). Remove hose assemblies (5).
Illustration 3 g03251617
Remove governor motor assembly (6). Remove harness assembly (7). Remove cable assembly (8).
Illustration 4 g03251698
Remove hose (9). Remove alternator (10).
Illustration 5 g03251778
Remove bolts (11). Reposition air conditioning compressor (12) out of the way.
Illustration 6 g03251819
Remove cable assemblies (13). Remove harness assembly (14).
Illustration 7 g03251898
Remove bracket assembly (16) and plate (15).
Illustration 8 g03251957
Remove cover assembly (17).
Illustration 9 g03252078
Attach Tooling (A) to hydraulic pump (18) in order to apply slight lifting tension on hydraulic pump (18).
Illustration 10 g03252197
Remove bolts (19).
Illustration 11 g03252217
Illustration 12 g03252277
Attach a suitable lifting device to engine (20). Remove engine mount bolts (21). Repeat for other side.
Remove engine (20) from the machine.
Remove the hood.
Remove the fan.
Remove the muffler.
Remove the counterweight.
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids.Refer to Special Publication, NENG2500, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat products.Dispose of all fluids according to local regulations and mandates.
Keep all parts clean from contaminants.Contamination of the hydraulic system with foreign material will reduce the service life of the hydraulic system components.To prevent contaminants from entering the hydraulic system, always plug or cap the lines, fittings, or hoses as they are disconnected. Cover any disassembled components and clean them properly before assembly.Clean the hydraulic system properly after any major component exchange or especially after a component failure, to remove any contamination.
Illustration 1 g03251544
Turn fuel shutoff valve (1) to the OFF position.
Illustration 2 g03251576
Remove hose assemblies (2). Remove hose assemblies (3). Remove hose (4). Remove hose assemblies (5).
Illustration 3 g03251617
Remove governor motor assembly (6). Remove harness assembly (7). Remove cable assembly (8).
Illustration 4 g03251698
Remove hose (9). Remove alternator (10).
Illustration 5 g03251778
Remove bolts (11). Reposition air conditioning compressor (12) out of the way.
Illustration 6 g03251819
Remove cable assemblies (13). Remove harness assembly (14).
Illustration 7 g03251898
Remove bracket assembly (16) and plate (15).
Illustration 8 g03251957
Remove cover assembly (17).
Illustration 9 g03252078
Attach Tooling (A) to hydraulic pump (18) in order to apply slight lifting tension on hydraulic pump (18).
Illustration 10 g03252197
Remove bolts (19).
Illustration 11 g03252217
Illustration 12 g03252277
Attach a suitable lifting device to engine (20). Remove engine mount bolts (21). Repeat for other side.
Remove engine (20) from the machine.