BKTHG00 Lafayette 3608 Engine Caterpillar parts
3608
Rating:
Alternative (cross code) number:
CABKTHG00
BKT-HG00
BKTHG00
CABKTHG00
BKT-HG00
BKTHG00
MARINE ENGINE,
Compatible equipment models: BKTHG00:
For full view, you need register
Information:
Introduction
The problem that is identified below does not have a known permanent solution. Until a permanent solution is known, use the solution that is identified below.Problem
The Trimble SNM940 harness (P/N # 86940-02) connects the SNM940 over CAN to GCS900/AccuGrade. This can cause issues with the GNSS system including "No GNSS Right" errors.Solution
Illustration 1 g06003317
Connector location
Remove the pin-9 and pin-4 from the brown 12-pin deutsch connector from the Trimble SNM940 harness (P/N # 86940-02). Insert the removed pins into the 2-pin deutsch connector to keep them secured and cap the new connector. Refer to Illustration ***#i07236216/i06506843.3***.Note: The SNM940 software is being developed. Once the software is available, updating the SNM940 software will solve this issue.
The problem that is identified below does not have a known permanent solution. Until a permanent solution is known, use the solution that is identified below.Problem
The Trimble SNM940 harness (P/N # 86940-02) connects the SNM940 over CAN to GCS900/AccuGrade. This can cause issues with the GNSS system including "No GNSS Right" errors.Solution
Illustration 1 g06003317
Connector location
Remove the pin-9 and pin-4 from the brown 12-pin deutsch connector from the Trimble SNM940 harness (P/N # 86940-02). Insert the removed pins into the 2-pin deutsch connector to keep them secured and cap the new connector. Refer to Illustration ***#i07236216/i06506843.3***.Note: The SNM940 software is being developed. Once the software is available, updating the SNM940 software will solve this issue.