PRESSURIZER GP 1605592 - Caterpillar

When Required
Engine Air Intake System - Service filters Ether Starting Aid - Replace Cylinder Fuses and Circuit Breakers - Replace/reset Cutting Edges and End Bits - Replace if worn or damaged Ripper Tips and Shank Protectors - Replace if worn or damaged Radiator - Clean/replace pressure cap Transmission System - Clean screens Windshield Wipers and Washer - Inspect/replace Winch (If Equipped) - Install wire rope cable Equalizer Bar Center Pin - Inspect Batteries - InspectEvery 10 Service Hours or Daily
Walk-Around Inspection - Inspect machine Seat Belt - Inspect Window Cleaning Engine Crankcase - Check oil level Transmission System - Check oil level Hydraulic System - Check oil level Radiator - Check coolant level Fuel Tank - Drain water and sediment Brakes, Indicators, and Gauges - Test for proper function Winch (If Equipped) - Check oil level Back-up Alarm - Test Tracks - Inspect for proper adjustment Pivot Shaft - Check oil level Track Roller Frame - InspectEvery 50 Service Hours or Weekly*
Track Pins - Inspect Ripper Linkage and Cylinder Bearings - Lubricate Cab Air System - Clean filtersEvery 250 Service Hours or Monthly*
Engine Oil and Filters - Change. If the sulfur content in the fuel is greater than 1.5% by weight, use an oil with a TBN of 30 and reduce the oil change interval by one half Engine Valve Clearance - Be certain to make the initial engine valve clearance setting adjustment between the first 250 and 1000 service hours on new and reconditioned engines. Then, adjust the valve clearance setting at normal interval thereafter Cooling System - Add coolant additive Final Drives - Check oil level Brakes - Test Tracks - Adjust Air Conditioner (If Equipped) - Test/adjust belt Fan and Alternator Belts - Inspect/adjust/replace Batteries - Inspect Equalizer Bar End Pins - LubricateEvery 500 Service Hours or 3 Months*
Transmission System - Replace filters Hydraulic System - Replace filters Fuel Tank - Clean cap and strainer Fuel Filters - Wash primary/change secondary filters Engine Crankcase Breathers - Clean Winch (If Equipped) - Change filter/wash strainer Recoil Spring Compartment - Check oil level Equalizer Bar Pads - Inspect/replaceEvery 1000 Service Hours or 6 Months *
Transmission System - Change oil/wash breather Winch (If Equipped) - Change oil/wash breather Lift Cylinder Yoke Bearings - Lubricate Rollover Protective Structure/Falling Object Protective Structure (ROPS/FOPS) - InspectEvery 2000 Service Hours or 1 Year *
Hydraulic System - Change oil Final Drives - Change oil Engine Valve Clearance Setting - Adjust Engine Valve Rotators - Inspect Track Roller Frame Guides - Measure wearEvery 3000 Service Hours or 2 Years *
Cooling System Coolant - Change coolant/clean system LLC Coolant (If Equipped) - Add ExtenderEvery 6000 Service Hours or 4 Years *
LLC Coolant (If Equipped) - Change coolant/Clean System*First Perform Previous Service Hours Items