TUBE AS 2559787 - Caterpillar

1. Make sure the steering frame lock link is in the carry position. 2. Raise the bucket to the carry position approximately 40 cm (15 inches) above the ground. 3. Push the knob down to release the parking/secondary brake. 4. Pull out the knob to release the transmission control lock.It is possible to start the engine when the transmission control lever is in FORWARD or REVERSE, but the machine will not move. Should this happen, move the lever to NEUTRAL, then to the desired speed and direction.
Be sure the area is clear of personnel and obstructions.
5. Move the transmission control to the desired travel direction. Rotate the control to the desired speed. 6. Depress the accelerator pedal. Drive the machine forward for best visibility and control.
For operator comfort and maximum service life of power train components, deceleration and/or braking is recommended before any directional shifts are made.
Parking/Secondary Brake System
If