1399784 ENGINE AR-COMPLETE Caterpillar parts
C-10
Rating:
Alternative (cross code) number:
CA1399784
139-9784
1399784
CA1399784
139-9784
1399784
TRUCK ENGINE,
Compatible equipment models: 1399784:
For full view, you need register
Information:
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 459-0233 Strap Wrench 1
B 5P-6029 Lockwire 1
C 314-8478 Diagonal Cutter 1
Start the machine and lower the screed to the ground.
Stop the engine. Turn the battery disconnect switch to the OFF position.
Illustration 1 g03677170
Remove the two bolts, the two washers, and walkways (1).
Illustration 2 g03677171
Disconnect harness assemblies (3) from inverter (2).
Illustration 3 g03677172
Remove two bolts (5) and the clamps. Disconnect harness assembly (4) from inverter (2).
Illustration 4 g06287912
Loosen the bolt (7) and disconnect the harness assembly.
Remove the bolt, the washer, and ground strap (6) from inverter (2).
Remove four bolts (8), the four washers, and inverter (2).Installation Procedure
Install inverter (2) in the reverse order of removal.
Tighten bolt (7) to a torque of 6 + 1.5 - 1 N m (53 + 13 - 9 lb in).
Use Tooling (A) and a torque wrench to tighten harness assembly (4) to a torque of 10.3 0.3 N m (93 3 lb in).
Illustration 5 g03677868
Use Tool (A) and a torque wrench to tighten harness assemblies (3). Tighten harness assemblies (3) to a torque of 10.3 0.3 N m (93 3 lb in).
Use Tool (C) to install Tool (B) to secure harness assemblies (3).
Table 1
Required Tools
Tool Part Number Part Description Qty
A 459-0233 Strap Wrench 1
B 5P-6029 Lockwire 1
C 314-8478 Diagonal Cutter 1
Start the machine and lower the screed to the ground.
Stop the engine. Turn the battery disconnect switch to the OFF position.
Illustration 1 g03677170
Remove the two bolts, the two washers, and walkways (1).
Illustration 2 g03677171
Disconnect harness assemblies (3) from inverter (2).
Illustration 3 g03677172
Remove two bolts (5) and the clamps. Disconnect harness assembly (4) from inverter (2).
Illustration 4 g06287912
Loosen the bolt (7) and disconnect the harness assembly.
Remove the bolt, the washer, and ground strap (6) from inverter (2).
Remove four bolts (8), the four washers, and inverter (2).Installation Procedure
Install inverter (2) in the reverse order of removal.
Tighten bolt (7) to a torque of 6 + 1.5 - 1 N m (53 + 13 - 9 lb in).
Use Tooling (A) and a torque wrench to tighten harness assembly (4) to a torque of 10.3 0.3 N m (93 3 lb in).
Illustration 5 g03677868
Use Tool (A) and a torque wrench to tighten harness assemblies (3). Tighten harness assemblies (3) to a torque of 10.3 0.3 N m (93 3 lb in).
Use Tool (C) to install Tool (B) to secure harness assemblies (3).