0003059 PIN Caterpillar parts
Rating:
Alternative (cross code) number:
CA0003059
000-3059
0003059
CA0003059
000-3059
0003059
Compare Prices: .
As an associate, we earn commssions on qualifying purchases through the links below
Universal TFX 0003059 - Auto Customizing Dual Pinstripe - 3/16" x 150' (1/16” Stripe, 1/16" Gap, Then 1/16” Stripe) - 059-Electric Blue Metallic
Universal 150 foot continuous roll || 2mil Premium high performance vinyl with 8 year durability || Double pinstripe is 3/16” overall width || One 1/16” stripe 1/16" gap then one 1/16” stripe. (*Note - Gap is not white, it is a gap) || Registration rules say to use a block letterstyle, Refer to your state regulations
Universal 150 foot continuous roll || 2mil Premium high performance vinyl with 8 year durability || Double pinstripe is 3/16” overall width || One 1/16” stripe 1/16" gap then one 1/16” stripe. (*Note - Gap is not white, it is a gap) || Registration rules say to use a block letterstyle, Refer to your state regulations
Information:
Illustration 1 g01008505
Air Conditioner (1) On machines that are equipped with an air conditioner, this message is located on the left side of the dash.
Illustration 2 g00934175
Read the service manual before you perform any service to the air conditioner.Battery (2) This message is located on the inside of the access door for the battery.
Illustration 3 g01008601
Use only 12 volts to start the engine. Damage to the engine may occur if more than 12 volts are used to start the engine.
Radio (3) This message is located on the cover for the radio.
Illustration 4 g00907584
Radio must be fastened securely to prevent falling out during rough machine operation or overturn. Radio mounting to DIN sleeve or bracket(s) must withstand 270 N (60 lb) minimum pulling force to resist shock loads.
No Step (4) This safety message is located on top of the cover for the angle cylinder on each side of the machine.
Illustration 5 g01010449
Do not use this surface as a step. Machine damage can occur. Always use the approved handholds and steps when you mount the machine or when you dismount the machine.
Lube Chart (5) This message is located on the inside of the access door for the battery.
Illustration 6 g01008620
This message is intended to be used as a reference. Refer to the Operation and Maintenance Manual, "Maintenance Interval Schedule" for the correct service intervals. Refer to the maintenance procedures in the Operation and Maintenance Manual for the correct procedures.
Parts pin Caterpillar catalog:
0002669
PIN
Caterpillar
Caterpillar
0001918
PIN
Caterpillar
Caterpillar
0001689
PIN
Caterpillar
Caterpillar
0000996
PIN
Caterpillar
Caterpillar
0000907
PIN-ROD END
Caterpillar
Caterpillar
0000710
PIN
Caterpillar
Caterpillar
0005398
PIN
Caterpillar
Caterpillar
0005356
PIN
Caterpillar
Caterpillar
0005289
PIN
Caterpillar
Caterpillar
0005215
PIN
Caterpillar
Caterpillar
0003419
PIN-DRIVE GEAR
Caterpillar
Caterpillar
0003418
PIN
Caterpillar
Caterpillar